Doyle Mfg. 2012 Bucket Elevator
- Item #: 2012
Product Description
Doyle Manufacturing builds three types of Bucket Elevator:
- 1090 – 90 tons per hour (based on 60 lbs per cu ft material)
- 2012 – 120 tons per hour (based on 60 lbs per cu ft material)
- 2415 – 200 tons per hour (based on 60 lbs per cu ft material)
Standard Features:
- #304 stainless steel construction
- 15 ft. thru 90 ft. discharge heights available
- 120 ton per hour capacity (based on 60 lb. per cu. ft. material)
- 12 ga.#304 stainless steel head and boot sections, with 7 ga. #304 angle supports
- 14 ga. #304 stainless steel trunking sections
- #304 stainless steel clean out in both sides of boot section
- #304 stainless steel bolt on service door / clean out in first trunk section
- 20″ diameter vulcanized rubber, herringbone pattern, head roller
- 20″ diameter turnkleen style boot idler roller
- #304 stainless steel take-up assemblies
- #304 stainless steel assembly hardware
- 11″ wide rubber belt
- 10″ x 6″ polyethylene buckets on 8″ centers
- Stainless steel bucket hardware
- Shaft mount drive, includes V-belt, sheaves, bushings, and TEFC motor
- 24″ wide x 24″ deep x 56″ high intake hopper
Optional Features:
- Ladders, cages, and platforms
- Spouting and spouting accessories available (2012 head discharge is 12″ square)
- Second intake hopper
- Intake hopper cover
- Payloader inload hopper, 4 ft. wide x 8 ft. long
- Fertilizer conditioner in above payloader hopper
- Distributor platform, large or small
Product Specs
- Product TypeEquipment