Doyle Mfg. 2415 Bucket Elevator

Product Description

Doyle Manufacturing builds three types of Bucket Elevator:

• 1090 – 90 tons per hour (based on 60 lbs per cu ft material)
• 2012 – 120 tons per hour (based on 60 lbs per cu ft material)
• 2415 – 200 tons per hour (based on 60 lbs per cu ft material)

Standard Features:

• #304 stainless steel construction
• 15 ft. thru 90 ft. discharge heights available
• 200 ton per hour capacity (based on 60 lb. per cu. ft. material)
• 12 ga.#304 stainless steel head and boot sections, with 7 ga. #304 angle supports
• 14 ga. #304 stainless steel trunking sections
• #304 stainless steel clean out in both sides of boot section
• #304 stainless steel bolt on service door / clean out in first trunk section
• 24″ diameter vulcanized rubber, herringbone pattern, head roller
• 24″ diameter turnkleen style boot idler roller
• #304 stainless steel take-up assemblies
• #304 stainless steel assembly hardware
• 14″ wide rubber belt
• 13″ x 6″ polyethylene buckets on 8″ centers
• Stainless steel bucket hardware
• Shaft mount drive, includes V-belt, sheaves, bushings, and TEFC motor
• 24″ wide x 24″ deep x 56″ high intake hopper
• Factory assembled & tested

Optional Features:

• Ladders, cages, and platforms
• Spouting and spouting accessories available (2415 head discharge is 14″ square)
• Second intake hopper
• Intake hopper cover
• Payloader inload hopper, 4 ft. wide x 8 ft. long
• Fertilizer conditioner in above payloader hopper
• Distributor platform, large or small