Doyle Mfg., Yanmar, B&B Technologies - Quality Steel

Standard Features: (2) 241 cu. ft. compartments in 12 ga. 304 stainless stee 10″ x 12 ga. 304 stainless steel auger tube, and augers with 304 stainless steel flighting and mils steel pipe Heavy duty 304 stainless steel square tubing main frame 1.75 ton per minute discharge rate Stainless steel manually operated slide gates Tender with front and rear ladder 20 ft. hydraulically raised and lowered discharge auger, 14 foot discharge height Mild steel trailer fenders, with Doyle mud flaps 18.5 gallon hydraulic tank with temperature gauge, site glass, and large hydraulic filters, metal shot blasted and powder coated bright blue Hydraulic pump, cylinders, lines, hoses, and fittings Roll tarp with stainless steel end caps D.O.T. approved lights, tail and marker Factory assembled & tested

Standard Features: 14 ga. 304 stainless steel hopper construction 2” x 6” mild steel tubing frame, with heavy duty mild steel corner braces Bolt on hopper to frame, allows easy hopper removal from frame Heavy duty adjustable hitch Heavy duty 8,000 lb. tongue jack Single 7,000 lb. Henschen axle, with 6-bolt hubs 36 x 13.5 / 15 Multi turf tires 1” x 1” mesh type heavy duty 8” conveyor chain All metal press wheel with manual engagement Twin dished type spinners, 19-1/4” diameter with 4 adjustable stainless steel blades Main gearbox and spinner mount assemblies are 304 stainless steel Factory assembled & tested Optional Features: Hydraulic press wheel engagement includes springs, cylinder, and hydraulic hoses Hydraulically driven spinner assembly, with flow control Fitted nylon tarp with grommets Roll Tarp Inspection window in hopper front The Doyle 2 Ton Ground Wheel Drive Spreader was designed for fertilizing food plots, golf courses, and other turf type applications. The modular design allows Doyle to customize the units to fit your needs; this means that your spreader is no longer a disposable unit. If in the years to come a part fails or wears out, it can be quickly repaired or replaced. This includes the hopper, frame, axle, and all drive assemblies. Our hoppers are constructed of 14 ga. 304 stainless steel. Each hopper is laser cut and jig built to precise measurements; this allows every hopper to fit every frame accurately. A chemical baffle is added inside the hopper; this keeps the material from “bridging” and reduces the amount of weight on the conveyor chain. As with all Doyle products, the hopper seams are continuously welded inside and out. Doyle's unique bin design is easily removable from the frame; just 4 bolts and special box washers hold the hoppers to the frames. The frame assembly is made of heavy duty mild steel; it was designed to be rugged and twist resistant. Doyle's frame consists of a mild steel tubing base, with heavy duty mild steel corner braces. Doyle's corner braces are laser cut, and jig built, that means that every hopper fits on every frame. All frame surfaces are “boxed” to minimize the areas that corrosive materials can be trapped. This allows the operator to easily wash the unit off after use. The frame is metal shot blasted and powder coated bright blue. Each frame uses Henschen axle, multi trac turf tires, adjustable height hitch, and a heavy duty tongue jack. The standard drive system consists of manual engagement assembly, power frame assembly, main gearbox assembly, spinner gearboxes, and spinner dishes. The manual engagement assembly is used to engage and disengage the drive system. The assembly is made of heavy duty mild steel, has CNC machined parts, is metal shot blasted, and powder coated bright blue. An optional hydraulic engagement system is available. The power frame assembly uses a combination of CNC machined parts and laser cut parts, and is jig built. The power frame assembly transfers power from the units tires to the gearbox assembly. The assembly has a uniquely designed power wheel. When engaged, this wheel grips the tire, and produces a slip-free connection, in most cases. If surface moisture or mud is a problem, an optional mud tire and power wheel combination is available for 5 ton unit only. The main gearbox assembly consists of specialized gears and sprockets enclosed in a heavy duty gear case. The gear case is made of 304 stainless steel. Each gearbox has laser cut parts and is jig assembled, making for a virtually leak proof case. The gearbox is powered by the power frame assembly. Its job is to provide the power to the conveyor chain and the spinner gear boxes. A sight glass is installed in each gearbox; this allows the operator to quickly assess the oil level inside the gearbox. The spinner gearboxes are custom made for Doyle; they have been engineered to be long lasting and reliable, in all operating conditions. The spinner gearboxes are painted bright blue. The twin 19-1/4″ spinner dishes are made of heavy duty mild steel. Each spinner dish has three laser cut blade location holes. Four 304 stainless steel blades are bolted into these holes. The blades shape is specifically designed to throw material consistently and evenly. Each blade can be fine tuned by moving it to any one of the three operating locations. The blade locations have been calibrated by Doyle to provide the most consistent spread rates, with the broadest range of materials.

Standard Features: 14 ga. 304 stainless steel hopper construction 2″ x 6″ mild steel tubing frame, with heavy duty mild steel corner braces and 4″ x 6″ tubing tongue Bolt on hopper to frame, allows easy hopper removal from frame Heavy duty adjustable hitch Heavy duty 12,000 lb. tongue jack Single spindle design, with 8-bolt hubs 11.25 – 24SL implement rib tires 1″ x 1″ mesh type heavy duty 8″ conveyor chain All metal double press wheel with manual / hydraulic engagement, includes cylinder and hoses Twin dished type spinners, 19-1/4″ diameter with 4 adjustable stainless steel blades Tire hubs are reversible, providing 30″ or 38″ row spacing Inspection window in hopper front (standard on mid-clearance units only) Main gearbox and spinner mount assemblies are 304 stainless steel Factory assembled & tested Our 5 and 6 Ton Ground Wheel Drive Spreaders have the best features, and are the most durable spreaders on the market today. The modular design allows Doyle to customize the units to your needs, this means that your spreader is no longer a disposable unit. If in the years to come a part fails or wears out, it can be quickly repaired or replaced. This includes the hopper, frame, axles, and all drive assemblies. Our hoppers are constructed of either 14 ga. 409 stainless steel or 14 ga. 304 stainless steel. Each hopper is laser cut and jig built to precise measurements; this allows every hopper to fit every frame accurately. A chemical baffle is added inside the hopper; this keeps the material from “bridging” and reduces the amount of weight on the conveyor chain. As with all Doyle products, the hopper seams are continuously welded inside and out. The 409 hoppers are metal shot blasted and powder coated white. Doyle's unique bin design is easily removable from the frame; just 4 bolts and special box washers hold the hoppers to the frames. The frame assembly is made of heavy duty mild steel; it was designed to be rugged and twist resistant. Doyle's frame consists of a mild steel tubing base, with heavy duty mild steel corner braces. Doyle's corner braces are laser cut, and jig built, that means that every hopper fits on every frame. All frame surfaces are “boxed” to minimize the areas that corrosive materials can be trapped. This allows the operator to easily wash the unit off after use. The frame is metal shot blasted and powder coated bright blue. Each frame uses tandem Henschen axles, ribbed highway implement tires, adjustable height hitch, and a heavy duty tongue jack. The standard drive system consists of manual engagement assembly, power frame assembly, main gearbox assembly, spinner gearboxes, and spinner dishes. The manual engagement assembly is used to engage and disengage the drive system. The assembly is made of heavy duty mild steel, has CNC machined parts, is metal shot blasted, and powder coated bright blue. An optional hydraulic engagement system is available. The power frame assembly uses a combination of CNC machined parts and laser cut parts, and is jig built. The power frame assembly transfers power from the units tires to the gearbox assembly. The assembly has a uniquely designed power wheel. When engaged, this wheel grips the tire, and produces a slip-free connection, in most cases. If surface moisture or mud is a problem, an optional mud tire and power wheel combination is available for 5 ton unit only. The main gearbox assembly consists of specialized gears and sprockets enclosed in a heavy duty gear case. The gear case is made of 304 stainless steel, when the 304 stainless steel hopper is used. It is constructed of mild steel, when the 409 stainless steel hopper is used. The mild steel gear case is metal shot blasted, and powder coated bright blue. Each gearbox has laser cut parts and is jig assembled, making for a virtually leak proof case. The gearbox is powered by the power frame assembly. Its job is to provide the power to the conveyor chain and the spinner gear boxes. A sight glass is installed in each gearbox; this allows the operator to quickly assess the oil level inside the gearbox. The spinner gearboxes are custom made for Doyle; they have been engineered to be long lasting and reliable, in all operating conditions. The spinner gearboxes are painted bright blue. The twin 19-1/4″ spinner dishes are made of heavy duty mild steel. Each spinner dish has three laser cut blade location holes. Four 304 stainless steel blades are bolted into these holes. The blades shape is specifically designed to throw material consistently and evenly. Each blade can be fine tuned by moving it to any one of the three operating locations. The blade locations have been calibrated by Doyle to provide the most consistent spread rates, with the broadest range of materials.

Standard Features: 12 ga. 304 stainless steel hopper construction 2″ x 6″ mild steel tubing frame, with heavy duty mild steel corner braces Bolt on hopper to frame, allows easy hopper removal from frame Heavy duty adjustable hitch Heavy duty 12,000 lb. tongue jack Tandem 8,000 lb. axles, with 8-bolt hubs 14 L x 16.1 Hi-speed implement rib tires 1″ x 1″ mesh type heavy duty 8″ conveyor chain 1″ x 1″ mesh type heavy duty #304 stainless steel conveyor chain, 8″ wide Hydraulically driven twin “dished” spinners, 19-1/4″ diameter with 4 blades per spinner, specially designed for extremely accurate broadcasting of spreader Conveyor driven by press wheel, engaged and disengaged with hydraulic cylinder connected to tractor Inspection window in hopper front Factory assembled & tested Optional Features: PTO Drive System, w/ 29.5 gallon hydraulic tank with temperature gauge, site glass, and large hydraulic filters, metal shot blasted and powder coated bright blue Fitted nylon tarp with grommets Roll Tarp Surge brake system, 1 axle

Standard Features: 14 ga. 409 stainless steel hopper construction, all metal shot blasted and powder coated OR 14 ga. 304 stainless steel hopper construction 2″ x 6″ mild steel tubing frame, with heavy duty mild steel corner braces Bolt on hopper to frame, allows easy hopper removal from frame Heavy duty adjustable hitch Heavy duty 12,000 lb. tongue jack Tandem 8,000 lb. axles, with 8-bolt hubs 14 L x 16.1 Hi-speed implement rib tires 1″ x 1″ mesh type heavy duty 8″ conveyor chain All metal press wheel with hydraulic engagement 31.5 gallon hydraulic tank with temperature gauge, site glass, and large hydraulic filters, metal shot blasted and powder coated bright blue Hydraulic PTO pump, lines, hoses, and fittings Twin dished type spinners, 20-5/16″ diameter with 4 adjustable stainless steel blades

Standard Features: #304 stainless steel hopper construction Bolt together design, hopper to chassis Tandem 10,000 lb. axle suspension, with 8-bolt hubs 19 L x 16.1 tires on W16CH x 16.1 wheels Utilizes two sets of sprockets for conveyor rates 1” x 1” mesh type heavy duty #304 stainless steel conveyor chain, 20” wide Conveyor driven by press wheel, engaged and disengaged with hydraulic cylinder connected to tractor Metering gate sprockets, metering gate, gate slides, and gate shaft manufactured in #304 stainless steel Hydraulically driven twin “dished” spinners, 24” diameter with 4 blades per spinner, specially designed for extremely accurate broadcasting of spreader Factory assembled & tested Optional Features: PTO Drive System, w/ 29.5 gallon hydraulic tank Surge brake system, 1 axle Surge brake system, 2 axles Fitted nylon tarp with grommets Roll Tarp Inspection window in hopper front

1212 FBL Overhead Drag Conveyors 1214 FBL Overhead Drag Conveyors Standard Features:  Head Section 3/16” #304 stainless steel shell construction Bolt on #304 top cover Heavy duty stainless steel reversable motor mount, bolt-on design for access to drive sprocket TEFC Motor, motor size depends on length, available sizes are: 5 HP thru 40 HP Heavy duty shaft mounted gearbox Heavy four bolt bearings, with UHMW dust seals Heavy duty drive sprocket Intermediate (Straight) Sections Available in lengths from 1’ to 9’-10”(10’), in 6” increments 12 ga. #304 stainless steel “u” trough sections Bolt on top covers Heavy duty #304 1 1/2 angle bolt flanges UHMW return rollers, with stainless steel shafts Drop Door Sections Standard doors for filling indoor bins 12 ga. #304 stainless steel shell construction #304 door handles, latches, hinges, and catches with one hand operation Large 42” long opening, to reduce carry over UHMW return rollers, with stainless steel shafts Inlet Hopper Section 12 ga. #304 stainless steel construction Avaliable with round or square spouting connection Tail Section 10 ga. #304 stainless steel shell construction Bolt on #304 top cover #304 stainless steel take-up bolts Heavy bearings, mounted on #304 stainless steel take-up mounts Heavy duty tail sprocket Chain & Paddles XH88 Heavy Duty Pintle Chain, with paddle attachment every foot 5/8” thick UHMW paddle Optional Features: Available with enclosed doors for applications outside applications (above roof) or where material needs to be spouted to a desired location Stainless steel square to round transitions, flange rings, clamp bands, & spouting

1212 Flightstar Drag Conveyors 120 tons per hour 1616 Flightstar Drag Conveyors 200 tons per hour Standard Features:   Head Section 3/16” #304 stainless steel shell construction 10 ga. #304 stainless steel divider (wear) pan Bolt on #304 top cover Heavy duty stainless steel tubing motor mount, bolt-on design for access to drive sprocket TEFC Motor, motor size depends on length, available sizes are: 5 HP thru 100 HP Heavy duty shaft mounted gearbox Heavy pillow block bearings, mounted on #304 stainless steel mounts Heavy duty drive sprocket Stainless steel discharge to 10” round or 12” square Intermediate (Straight) Sections Available in lengths from 1’ to 9’-10”(10’), in 6” increments 12 ga. #304 stainless steel “u” trough sections 12 ga. #304 stainless steel divider (wear) pan, bolt-in design for easy cleaning Bolt on top covers Heavy duty #304 1 1/2 angle bolt flanges Curve Section Available in angles from 10 degrees to 60 degrees, in 5 degree increments 10 ga. #304 stainless steel side plates 10 ga. #304 stainless steel divider (wear) pan Bolt on top covers Heavy duty #304 bolt flanges Hopper Section Available in lengths from 2’, 3’, 4’ increments 12 ga. #304 stainless steel shell construction 12 ga. #304 stainless steel divider (wear) pan #304 stainless steel weight breaker Heavy duty #304 1 1/2″ angle bolt flanges #304 stainless steel adjustable flow control gates Tail Section 3/16” #304 stainless steel shell construction 10 ga. #304 stainless steel divider (wear) pan Bolt on #304 top cover #304 stainless steel take-up bolts Heavy bearings, mounted on #304 stainless steel take-up mounts Heavy duty tail sprocket Chain & Paddles XH88 Heavy Duty Pintle Chain, with paddle attachment every foot 5/8” thick UHMW paddle Optional Features: Pit drive over grates Mild steel support stands, available from 2’ tall thru 40’ tall Stainless steel square to round transitions, flange rings, clamp bands, & spouting Rubber pit cover Air drop doors

The Doyle Field Loader Conveyor (FLC) is today’s answer to your remote fertilizer or grain loading application. It’s completely portable and has a self contained 20 h.p. Honda gas engine, with hydraulic pump and motor. This allows you adjust the 24″ belt speed from 0 to 550 fpm. Adjustable belt speed, along with the optional adjustable discharge chute means you can “throw” material off the end of the conveyor, or direct it straight down for precise loading control. The standard FLC has a 35′ over all length, with a 10′ horizontal section, and a 25′ incline section. The FLC is constructed of 304 stainless steel, with a mild steel undercarriage. The 10′ horizontal section is 6″ deep and fits under most rail cars and trucks to save the added expense of a separate undercar conveyor. The 13′-6″ discharge height makes it easy to fill transport or floater trucks. Heavy gauge, 304 stainless steel channel construction builds in the durability you need at a price you can afford. The FLC is exactly balanced for easy one man hook-up. Mild steel square tube undercarriage, with an 80″ wheel base gives it excellent stability in transport. Undercarriage bead blasted and powder coated red. Our Doyle Field Loader Conveyor is the highest quality, field loader conveyor on the market today. We offer the best warranty, the best options, extra heavy duty construction, factory delivery / set-up. Contact us today for assistance in meeting your mixing or bulk handling needs. We are always happy to help you decide which products and options best fit into your operation. We can also custom design a system for your needs. You will be glad you decided on Doyle, home of Worldwide Quality Blending, Conveying, Tending, and Spreading Products! Standard Features: 24″ wide Crescent top belt, with stainless steel lacing 20HP Honda gas engine Up to 150 tons per hr. discharge rate (based on 60 lb. per cu. ft. material) Crowned and lagged drive and idler pull Square tubing style take-up assemblies 2″ steel return rollers 1″ bearings throughout Direct head drive 6 gallon metal gas tank 17 gallon metal hydraulic tank 215/75R 15″ Tires Tow hitch Optional Features: Adjustable discharge spout 12″ Round, fully enclosed, discharge spout Stainless steel weather covers 4′ Adjustable folding hopper 15 h.p. electric motor driving a hydraulic pump and motor Kubota D722 diesel engine, in lieu of 20 h.p. Honda gas engine Hydraulic self propelled undercarriage Conveyor can be built to run straight off tractor hydraulics. Note: This option still includes hydraulic lines and hoses to hydraulic motor. Also includes flow control to regulate output speed. Stainless undercarriage 5′ Extension for discharge end