Quality Steel | Wessex | Simonsen | Case Ih | Hustler | Redexim Products

BFT8024STA Truck Mounted Top Auger

BFT8024STA

Available in 304 and 409 stainless steel, the BFT8024STA is a truck mounted top delivery auger tender that has three 8 ton compartments instead of four 6 ton compartments. The 10X13X10 delivery auger system, large trap openings, and steep slopes combine to offer unloading speeds of up to #3500 per minute. The rotating delivery auger allows for filling of multiple compartments without the need for repositioning. The 20 foot delivery auger will make filling any applicator easy. Discharge heights of over 20 feet high and a long reach allow applicators to park away from the tender keeping your equipment and personnel safe from harm. Overview 800 cubic foot capacity (24 ton). 3 standard eight ton compartments with splits available (6 compartments total). 6" higher sides available. 14"X18" stainless steel slide gates. Stainless steel hopper, auger tubes, and flighting. 10"X13"X10" auger system. 19 foot long discharge auger. Discharge rate of up to #3500 per minute. Large pit dump/cleanout on the vertical auger. Hydraulic raise/lower/turn on delivery auger. Hydraulic controls located at the rear drivers corner. Heavy duty hydraulic system with tandem hydraulic pump. 40 degree side slopes for thorough cleanout. Full length fold down catwalks available. Large hydraulic reservoir to keep your oil cool. Full length fenders. Manual or electric roll tarps available. Separate dry chemical tender available.

$0.00

View Details

BFT8424STA Truck Mounted Top Auger

BFT8424STA

Available in 304 and 409 stainless steel, this 24 ton truck mounted top delivery auger fertilizer tender is designed to give you the capacity you need when pulling a trailer just isn't right for your operation. Keeping your tender truck mounted makes access onto country roads and narrow field entrances much easier when compared to a trailer. The 10X13X10 delivery auger system, large trap openings, and steep slopes combine to offer unloading speeds of up to #3500 per minute. The rotating delivery auger allows for filling of multiple compartments without the need for repositioning. The 20 foot long delivery auger will make filling any applicator easy. Discharge heights of over 20 feet high and a long reach allow applicators to park away from the tender keeping your equipment and personnel safe from harm. Blue color is standard but other colors are available upon request. Overview 840 Cubic foot capacity (24 ton) 4 standard six foot compartments with splits available (up to 8 total compartments) 6" higher side option available. 14"X18" stainless steel slide gates. Stainless steel hopper, auger tubes, and flighting. 10"X13"X10" stainless steel auger system. Unloading rate of up to #3500 per minute Heavy duty tandem pump. Heavy duty hydraulics with liquid filled gauges located on the rear passenger corner for easy operation. Heavy duty hydraulic motors are isolated from the fertilizer to minimize maintenance and prolong their useful life. Hydraulic raise/lower on the delivery auger. Hydraulic power turn on the vertical auger. Large pit dump/cleanout on the vertical auger. Removable cleanout cover between vertical and delivery augers. Stainless Steel hopper, slide gate assemblies, auger tubing, and auger flighting. Full length fold down catwalks available. Large hydraulic reservoir. Full length fenders. Manual or electric roll tarps available. Dry chemical bin option available.

$0.00

View Details

Anhydrous Ammonia (NH3) Tanks

QSAAT

1,000- 2,000 WG Capacity Specifications Stringently manufactured to the requirements of the ASME code for your safety Engineered roll-over cage with heavier steel and greater accessibility to valves Roll-over cage mounted on welding pads for maximum strength and is field repairable 30% more working clearance from liquid withdrawal valve and safety handle Seal welded stainless steel data plate mounted on pads and away from hose connections for longer life Superior leg design that is stronger, field repairable, mounted on a welding pad Precise fit before weld with 100% x-ray of long-seam welds Advanced powder paint coating to resist exterior corrosion All tanks are fully stress relieved to help alleviate stress corrosion All tanks are vacuum purged Standard tanks are shipped with stainless steel float gauges, water bottle attachments and two drain plugs A three-year limited warranty is in place along with the largest, most experienced sales and customer support team View Specifications

$0.00

View Details

CRX-320 Tri-Deck Roller Mower

CRX-320

Transform your golf course and other sports turf with ease and maneuverability with this versatile piece of machinery. HARDWARE The CRX-320 really is an exceptional mowing experience. With full-width rollers front and rear and 3.2m wide, it produces a precision cut and an outstanding stripe every time. Keeping the rollers as close as possible maximises ground-contour following, with excellent floating capabilities to closely hug the undulating courses of sports turf. The renowned CRX swing tip Gold Cut blades give you a superb cut and make for easy maintenance, while the wide-angle PTO gives you tight-turn capabilities for increased manoeuvrability. All you need is a 35hp tractor and only one spool valve, which makes it economical to operate with the simplest machinery. MAINTENANCE Simple too is the belt tension for quick and easy maintenance and the cutting height adjustment, between 10mm and 100mm, is equally straightforward. Minimal and easy-access grease points and shrouded PTO’s equate to long service intervals. The CRX-320 golf and sports turf mowers are made road-going with an optional highway kit for road-legal towing, so you can easily move from place to place. And with a 3-year warranty , what more could you ask for? The testimony to that is in the build quality, with 5mm steel plate decks making this mower robust and durable, and the aforementioned features that make the CRX-320 the perfect choice for maintaining your golf course or sports turf. You could even say it purrs. CUSTOMER TESTIMONIAL “The clippings dispersal of this machine is so good that we no longer need to use our sweeper collector on the fairways. We now have a spare man for other tasks, and we can use this as a rough-cut or fairway mower, which is fantastic.” – Leckford golf course FEATURES FULL-WIDTH ROLLERS FRONT & REAR – Precision cut and full-width stripe on the turf COMPACT ROLLER CONFIGURATION – Maximises ground contour following EXCELLENT FLOATING CAPABILITIES – Hugs the undulations closely CRX SWING TIP BLADES – Superb cut and easy maintenance WIDE ANGLE PTO – Zero turn capabilities REQUIRES ONLY 35HP TRACTOR – Economical to operate REQUIRES ONLY ONE DOUBLE ACTING SPOOL VALVE – Complements the simplest tractor TURF TYRES – Minimal turf compaction OPTIONAL HIGHWAY KIT – Allows road-legal towing FINAL BELT DECK DRIVE – For ultimate driveline shock protection SIMPLE BELT CHECK WITHOUT REMOVING THE GUARDS – Quick & easy maintenance 5MM STEEL PLATE DECKS – Robust & durable PROLIFT – Allows simple partial deck lift for crossing paths EASY CUTTING HEIGHT ADJUSTMENT – 10 – 110mm BAFFLES AROUND BLADES – Even grass distribution SPECIFICATIONS Cutting width 3.2m Overall width 3.35m Transport width 2.1m Approx weight 1,360kg Cutting height range 10-110mm No. of cutting spindles 9 Power required 35hp+

$0.00

View Details

CRX-400 Golf & Sports Turf Mower

CRX-400

Sharing the market-leading features of the Wessex CRX-320 roller turf mower, the 4 metre-wide CRX-400 will increase productivity whilst following the ground contours accurately. Full-width rollers front and rear ensure a prestigious stipe, whilst the compact design maximises the following of ground contours. All you need is a 40hp tractor and only one spool valve, which makes it economical to operate. Maintenance The simplicity of use for this turf mower was a key area of development. Both the belt tension and cutting height adjustment, between 10mm and 100mm, are equally straightforward. Minimal and easy-access grease points and shrouded PTOs equate to long service intervals. The CRX-400 golf and sports turf mowers are made road-going with an optional highway kit for road-legal towing, so you can easily move from place to place. Featuring a 3-year warranty, this turf mower proudly showcases premium build quality, with 5mm steel plate decks and the aforementioned features that make the CRX-400 the perfect choice for maintaining your golf course or sports turf. Features FULL-WIDTH ROLLERS FRONT & REAR – Precision cut and full-width stripe on the turf COMPACT ROLLER CONFIGURATION – Maximises ground contour following EXCELLENT FLOATING CAPABILITIES – Hugs the undulations closely CRX SWING TIP BLADES – Superb cut and easy maintenance WIDE ANGLE PTO – Zero turn capabilities REQUIRES ONLY 40HP TRACTOR – Economical to operate REQUIRES ONLY ONE DOUBLE ACTING SPOOL VALVE – Complements the simplest tractor TURF TYRES – Minimal turf compaction OPTIONAL HIGHWAY KIT – Allows road-legal towing FINAL BELT DECK DRIVE – For ultimate driveline shock protection SIMPLE BELT CHECK WITHOUT REMOVING THE GUARDS – Quick & easy maintenance 5MM STEEL PLATE DECKS – Robust & durable PROLIFT – Allows simple partial deck lift for crossing paths EASY CUTTING HEIGHT ADJUSTMENT – 10 – 110mm BAFFLES AROUND BLADES – Even grass distribution Specifications Cutting width – 4m Overall width – 4.15m Transport width – 2.1m Approx weight – 1,430kg Cutting height range – 10-110mm No. of cutting spindles – 9 Power required – 40hp+

$0.00

View Details

Turf Beetle Core Sweeper Collector

MTC-120-E

Ideal for collecting core, autumn leaves, grass clippings and scarifying debris etc, the MTC-120-E TURF BEETLE is an effective sweeper that can be towed behind an ATV, utility vehicle, garden tractor or 4×4. Designed for the maintenance of golf courses, private estates, parks and large gardens, the MTC-120-E TURF BEETLE sweeper collector is based on the DUNG BEETLE paddock cleaner but is fitted with a softer bristle to eliminate scratching of sensitive turf. Features 5.5HP ENGINE – Easy to start and reliable THROTTLE LEVER – Clips onto ATV rack for user convenience CENTRIFUGAL CLUTCH – Allows the brush rotor to be engaged/disengaged from the seat WHEELS IN-LINE WITH BRUSH ROTOR – Follows ground contours accurately, giving a consistent clean sweep SIMPLE SCREW HANDLE – Easy adjustment of brush height FULLY CASTORING REAR WHEELS – Increased manoeuvrability FLOATING DRAWBAR – Allows the machine to float over uneven ground with no weight on the ball hitch ADJUSTABLE SPRING TINES – Rake through the grass to loosen stubborn horse muck HAND OPERATED WINCH – For ease of emptying SOFT BRISTLE – Gentle on the turf, stimulates regrowth and is perfect for mowing straight after SWIVELLING BALL HITCH – Satisfies Health and Safety recommendations

$0.00

View Details

Nutri-Tiller 5310

5310

The Nutri-Tiller lineup manages crop residue, enhances soil tilth and improves fertilizer placement for maximum nutrient efficiency. The new 955 and enhanced 5310 are your one-pass seedbed solutions to effectively manage time, resources and inputs for improved productivity and greater return on investment. View Brochure Compare Specifications

$0.00

View Details

Nutri-Placer 920

920

The Case IH Nutri-Placer 920 features an AE 50 award winning, innovative design that is built for productivity. Whether it is the exclusive X-wing fold that allows easier movement from field to field or the commercial quality frame, control systems and attachments, the Nutri-Placer 920 is built to cover more acres per day. Type: Preplant Working Width: 42' 6" to 62' 6" (13.0 to 19.1) Tank Capacity: 1,650 and 2,050 gal (6,246 and 7,760L) View Brochure Compare Specifications

$0.00

View Details

Nutri-Placer 930

930

The Nutri-Placer 930 has proven ground engaging components for optimal NH 3 placement. In addition to a shank style applicator, it includes a High-speed Low Disturbance (HSLD) coulter option for optimal residue cover and greater productivity. It is available in five widths ranging from 32.5 to 47.5 ft (9.9-14.5 m). Type: Preplant Working Width: 32.5 to 47.5 ft (9.9M to 14.48M) Applicator Style: Shank Style or High-speed Low Disturbance (HSLD) Coulter View Brochure Compare Specifications

$0.00

View Details

Declining Weight Blending System

Closeout Sale