close
Categories
Filter By
Brand
- ABI1
- B&B Technologies2
- B&B Trailers7
- Capillary Flow1
- Case IH6
- Continental1417
- Dalton Ag7
- Doyle Mfg.47
- GSI InterSystems4
- Hustler1
- Jacobsen27
- Lely7
- Peterson's Dust Solutions2
- Precision Tank8
- Progressive Turf Equipment4
- Quality Steel1
- Rain Bird413
- Redexim4
- Simonsen7
- Smithco16
- Squibb Taylor7570
- Steiner1
- Traqnology1
- TriArc1
- Turfco12
- Wessex3
- Yanmar5
Price
Condition
Product Type
Simonsen, Quality Steel, Steiner, Lely, Turfco - Redexim
32 items
BFT8024STA Truck Mounted Top Auger
BFT8024STA
Available in 304 and 409 stainless steel, the BFT8024STA is a truck mounted top delivery auger tender that has three 8 ton compartments instead of four 6 ton compartments. The 10X13X10 delivery auger system, large trap openings, and steep slopes combine to offer unloading speeds of up to #3500 per minute. The rotating delivery auger allows for filling of multiple compartments without the need for repositioning. The 20 foot delivery auger will make filling any applicator easy. Discharge heights of over 20 feet high and a long reach allow applicators to park away from the tender keeping your equipment and personnel safe from harm. Overview 800 cubic foot capacity (24 ton). 3 standard eight ton compartments with splits available (6 compartments total). 6" higher sides available. 14"X18" stainless steel slide gates. Stainless steel hopper, auger tubes, and flighting. 10"X13"X10" auger system. 19 foot long discharge auger. Discharge rate of up to #3500 per minute. Large pit dump/cleanout on the vertical auger. Hydraulic raise/lower/turn on delivery auger. Hydraulic controls located at the rear drivers corner. Heavy duty hydraulic system with tandem hydraulic pump. 40 degree side slopes for thorough cleanout. Full length fold down catwalks available. Large hydraulic reservoir to keep your oil cool. Full length fenders. Manual or electric roll tarps available. Separate dry chemical tender available.
- USD
BFT8424STA Truck Mounted Top Auger
BFT8424STA
Available in 304 and 409 stainless steel, this 24 ton truck mounted top delivery auger fertilizer tender is designed to give you the capacity you need when pulling a trailer just isn't right for your operation. Keeping your tender truck mounted makes access onto country roads and narrow field entrances much easier when compared to a trailer. The 10X13X10 delivery auger system, large trap openings, and steep slopes combine to offer unloading speeds of up to #3500 per minute. The rotating delivery auger allows for filling of multiple compartments without the need for repositioning. The 20 foot long delivery auger will make filling any applicator easy. Discharge heights of over 20 feet high and a long reach allow applicators to park away from the tender keeping your equipment and personnel safe from harm. Blue color is standard but other colors are available upon request. Overview 840 Cubic foot capacity (24 ton) 4 standard six foot compartments with splits available (up to 8 total compartments) 6" higher side option available. 14"X18" stainless steel slide gates. Stainless steel hopper, auger tubes, and flighting. 10"X13"X10" stainless steel auger system. Unloading rate of up to #3500 per minute Heavy duty tandem pump. Heavy duty hydraulics with liquid filled gauges located on the rear passenger corner for easy operation. Heavy duty hydraulic motors are isolated from the fertilizer to minimize maintenance and prolong their useful life. Hydraulic raise/lower on the delivery auger. Hydraulic power turn on the vertical auger. Large pit dump/cleanout on the vertical auger. Removable cleanout cover between vertical and delivery augers. Stainless Steel hopper, slide gate assemblies, auger tubing, and auger flighting. Full length fold down catwalks available. Large hydraulic reservoir. Full length fenders. Manual or electric roll tarps available. Dry chemical bin option available.
- USD
Ground Driven WFR Broadcast Spreader
WFR
Hopper capacity of 550 lbs* (350 kgs) Forward speed of 4.5 mph (7.2 km/h) gives an effective spreading width of up to 52' (16 meters) Disengagement for towing, remote rope feed control and side spreading adjustment is standard Ground driven broadcasters are used for spreading fertilizer on golf courses, sports fields, parks or green areas. The W broadcast spreader is an accurate way to apply lime, turf seed, grains and sand. Land wheels are fitted with tractor profile (WGR), or lawn flotation (WFR) tires. All the standard features of the WFR are included and the optional mass feedring and short spoons give a spreading width of up to 18' (6 meters). SAND AND SALT This trailed spreader also does an excellent job spreading sand (top dressing) and/or salt (snow and ice). For sand and/or salt, a special ejector disc with short spoons gives a spreading width of up to 18' (6 meters). SPREADING SYSTEM The spreading pattern adjustment plate, with section indication, provides a variety of settings to ensure simple operation. DYNAMIC DESIGN Six dynamically designed spoons direct a metered quantity of material to the field, ensuring a constant and precise material feed from the disc to the spoons. EASY TO CLEAN All Lely broadcast spreaders have hoppers that can be removed or tilted up by one or two latches, making for a quick and easy cleaning of the critical feedring assembly area and ejector disk, as well as ensuring a long life for the spreaders. *All weight capacity’s are based upon 46-0-0 granular weight assumption of 48 pounds per cu. ft. Model Type Hopper Capacity (CU. FT.) Hopper Capacity (LBS.) Empty Weight Length Height Width Tire Spread Width WFR Trail, Ground Drive Flotation Tires 11.5 805 428 79” 48” 64” Flotation 18x9.50x81up up to 52’ WGR Trail, Ground Drive Ground Grip Tires 11.5 805 410 79” 49” 50” Ground 4.00x12 up to 52’ HR 3-pt. hitch p.t.o driven 11.5 805 320 38” 43” 51” — up to 52’ 1250 3-pt. hitch p.t.o driven 18.9 1,323 375 53” 51” 62” — up to 52’ 1500 3-pt. hitch p.t.o driven 23.6 1,650 420 50” 44” 77” — up to 52’ 2010 3-pt. hitch p.t.o driven 32.5 2,275 452 48” 49” 79” — up to 52’
- USD
HR Broadcast Spreader
HR
3-point hitch and PTO driven Hopper capacity of 550 lbs* (350 kgs) Accurate for up to 52' (16 meter) center or side applications One latch releases the hopper so all moving parts can be easily cleaned. An optional hopper extension increases capacity by up to 200 lbs* (90 kgs). SPREADING SYSTEM The spreading pattern adjustment plate, with section indication, provides a variety of settings to ensure simple operation. DYNAMIC DESIGN Six dynamically designed spoons direct a metered quantity of material to the field, ensuring a constant and precise material feed from the disc to the spoons. EASY TO CLEAN All Lely broadcast spreaders have hoppers that can be removed or tilted up by one or two latches, making for a quick and easy cleaning of the critical feedring assembly area and ejector disk, as well as ensuring a long life for the spreaders. *All weight capacity’s are based upon 46-0-0 granular weight assumption of 48 pounds per cu. ft. Model Type Hopper Capacity (CU. FT.) Hopper Capacity (LBS.) Empty Weight Length Height Width Tire Spread Width WFR Trail, Ground Drive Flotation Tires 11.5 805 428 79” 48” 64” Flotation 18x9.50x81up up to 52’ WGR Trail, Ground Drive Ground Grip Tires 11.5 805 410 79” 49” 50” Ground 4.00x12 up to 52’ HR 3-pt. hitch p.t.o driven 11.5 805 320 38” 43” 51” — up to 52’ 1250 3-pt. hitch p.t.o driven 18.9 1,323 375 53” 51” 62” — up to 52’ 1500 3-pt. hitch p.t.o driven 23.6 1,650 420 50” 44” 77” — up to 52’ 2010 3-pt. hitch p.t.o driven 32.5 2,275 452 48” 49” 79” — up to 52’
- USD
L Carrier Broadcast Spreader
L Carrier
Converts both the L1500 and L2010 to a trailer broadcast spreader No powerful lifting power is required Fertilizer, chemical or topdress spreading can be carried out with smaller tractors The spreader is PTO driven and offers a remote rope control feedring and side spreading, retaining all of the advantages of a 3-point spreader. Model Type Hopper Capacity (CU. FT.) Hopper Capacity (LBS.) Empty Weight Length Height Width Tire Spread Width WFR Trail, Ground Drive Flotation Tires 11.5 805 428 79” 48” 64” Flotation 18x9.50x81up up to 52’ WGR Trail, Ground Drive Ground Grip Tires 11.5 805 410 79” 49” 50” Ground 4.00x12 up to 52’ HR 3-pt. hitch p.t.o driven 11.5 805 320 38” 43” 51” — up to 52’ 1250 3-pt. hitch p.t.o driven 18.9 1,323 375 53” 51” 62” — up to 52’ 1500 3-pt. hitch p.t.o driven 23.6 1,650 420 50” 44” 77” — up to 52’ 2010 3-pt. hitch p.t.o driven 32.5 2,275 452 48” 49” 79” — up to 52’
- USD
L1250 Broadcast Spreader
L1250
Mounted by 3-point hitch/PTO driven, Category I or II Hopper capacity of up to 930 lbs* (422 kgs) of material Will handle bulk bagged fertilizers A pivoting hopper makes changing the feedring quick and easy. For sand top dressing, a mass feedring assembly option is also available. SPREADING SYSTEM The spreading pattern adjustment plate, with section indication, provides a variety of settings to ensure simple operation. DYNAMIC DESIGN Six dynamically designed spoons direct a metered quantity of material to the field, ensuring a constant and precise material feed from the disc to the spoons. EASY TO CLEAN All Lely broadcast spreaders have hoppers that can be removed or tilted up by one or two latches, making for a quick and easy cleaning of the critical feedring assembly area and ejector disk, as well as ensuring a long life for the spreaders. *All weight capacity’s are based upon 46-0-0 granular weight assumption of 48 pounds per cu. ft. Model Type Hopper Capacity (CU. FT.) Hopper Capacity (LBS.) Empty Weight Length Height Width Tire Spread Width WFR Trail, Ground Drive Flotation Tires 11.5 805 428 79” 48” 64” Flotation 18x9.50x81up up to 52’ WGR Trail, Ground Drive Ground Grip Tires 11.5 805 410 79” 49” 50” Ground 4.00x12 up to 52’ HR 3-pt. hitch p.t.o driven 11.5 805 320 38” 43” 51” — up to 52’ 1250 3-pt. hitch p.t.o driven 18.9 1,323 375 53” 51” 62” — up to 52’ 1500 3-pt. hitch p.t.o driven 23.6 1,650 420 50” 44” 77” — up to 52’ 2010 3-pt. hitch p.t.o driven 32.5 2,275 452 48” 49” 79” — up to 52’
- USD
L1500 Broadcast Spreader
L1500
3-point hitch and easy attach PTO drive, Category II Capacity of up to 1,185 lbs* (538 kgs) Low center of gravity and profile The hopper can be tilted backwards by unhooking two simple latches on the side, enabling the spreading mechanism to be cleaned quickly and easily. SPREADING SYSTEM The spreading pattern adjustment plate, with section indication, provides a variety of settings to ensure simple operation. Model Type Hopper Capacity (CU. FT.) Hopper Capacity (LBS.) Empty Weight Length Height Width Tire Spread Width WFR Trail, Ground Drive Flotation Tires 11.5 805 428 79” 48” 64” Flotation 18x9.50x81up up to 52’ WGR Trail, Ground Drive Ground Grip Tires 11.5 805 410 79” 49” 50” Ground 4.00x12 up to 52’ HR 3-pt. hitch p.t.o driven 11.5 805 320 38” 43” 51” — up to 52’ 1250 3-pt. hitch p.t.o driven 18.9 1,323 375 53” 51” 62” — up to 52’ 1500 3-pt. hitch p.t.o driven 23.6 1,650 420 50” 44” 77” — up to 52’ 2010 3-pt. hitch p.t.o driven 32.5 2,275 452 48” 49” 79” — up to 52’ DYNAMIC DESIGN Six dynamically designed spoons direct a metered quantity of material to the field, ensuring a constant and precise material feed from the disc to the spoons. EASY TO CLEAN All Lely broadcast spreaders have hoppers that can be removed or tilted up by one or two latches, making for a quick and easy cleaning of the critical feedring assembly area and ejector disk, as well as ensuring a long life for the spreaders. *All weight capacity’s are based upon 46-0-0 granular weight assumption of 48 pounds per cu. ft.
- USD
L2010 Broadcast Spreader
L2010
3-point hitch and easy attach PTO, Class II Capacity of up to 1,525 lbs* (691 kgs) Tilting hopper with two latches for easy cleaning The feed assembly can be adjusted by means of a graduated scale. This allows the amount of spread to be regulated accurately. This spreader will go anywhere your tractor goes. SPREADING SYSTEM The spreading pattern adjustment plate, with section indication, provides a variety of settings to ensure simple operation. DYNAMIC DESIGN Six dynamically designed spoons direct a metered quantity of material to the field, ensuring a constant and precise material feed from the disc to the spoons. EASY TO CLEAN All Lely broadcast spreaders have hoppers that can be removed or tilted up by one or two latches, making for a quick and easy cleaning of the critical feedring assembly area and ejector disk, as well as ensuring a long life for the spreaders. *All weight capacity’s are based upon 46-0-0 granular weight assumption of 48 pounds per cu. ft. Model Type Hopper Capacity (CU. FT.) Hopper Capacity (LBS.) Empty Weight Length Height Width Tire Spread Width WFR Trail, Ground Drive Flotation Tires 11.5 805 428 79” 48” 64” Flotation 18x9.50x81up up to 52’ WGR Trail, Ground Drive Ground Grip Tires 11.5 805 410 79” 49” 50” Ground 4.00x12 up to 52’ HR 3-pt. hitch p.t.o driven 11.5 805 320 38” 43” 51” — up to 52’ 1250 3-pt. hitch p.t.o driven 18.9 1,323 375 53” 51” 62” — up to 52’ 1500 3-pt. hitch p.t.o driven 23.6 1,650 420 50” 44” 77” — up to 52’ 2010 3-pt. hitch p.t.o driven 32.5 2,275 452 48” 49” 79” — up to 52’
- USD
Tri-fecta
Tri-fecta
The Tri-fecta name ties to the three functions of the new model - Flexible Rolling, Deep Vertical Cutting and SoilAeration. The number of tines has doubled to provide 1” spacing and the PlanetAir Tri-fecta has been developed into atournament quality roller. So you canaerate and roll or lock the rotor and justroll with your new Tri-fecta.
- USD
