Filter Sort
close
10 - 18 of 40
Grain Dust Control System

Grain Dust Control System

PDS2

Call us today to learn how Peterson Dust Solutions can help with dust suppression in your grain facilities. The benefits are listed below. Benefits Safety The dust reduction will significantly decrease the possibility of an explosion from grain dust. It will also reduce dust inhalation. Reduced Shrinkage Oiling will keep fine particles in the final weight, reducing shrinkage. Cleanliness The reduction of dust will help keep buildings cleaner, allowing a better work environment and longer equipment life. Grain Pile Hot Spots Distributes dust particles throughout the grain storage resulting in less hot spots in the grain pile.
View Details
Double Cone Tank Nurse Trailer

Double Cone Tank Nurse Trailer

DCT

This is a new Dalton Double Cone Nurse Trailer that has a 5,000 GL capacity and two Ace 2,500 GL cone bottom poly tanks. It also has a manual hydraulic jack and 280/70R15 Firestone tires. Comes standard with 2” Poly pump with 5 HP Honda Engine; 3” Fill on the rear. This trailer is ideal for liquid storage and transportation. The two cone bottom tanks allow for easy drainage, while the hydraulic jack makes it easy to move the trailer around as needed. The Firestone tires are durable and provide a smooth ride. The Dalton Double Cone Nurse Trailer is perfect for those who need to store and transport large amounts of liquid. The high capacity and easy-to-use design make it an excellent choice for any facility or business that frequently handles liquids. If you need to move large volumes of liquid on a regular basis, this is the perfect trailer for you.
View Details
MC1300 Single Nurse Trailer

MC1300 Single Nurse Trailer

MC1300

Features Ace 1300 gallon cone bottom tank (15 Degree) NO Brakes 8 bolt (813) hubs [4] 320/70R15 Firestone Radial tires on 15 x 10 rims Light kit Safety Chains Jack Bolt on Step Bolt on Fenders (Pair) Plumbing Kit 2” Plumbing package with a 2” Poly Pump and a Honda 5.5 hp Motor 3” Bottom Fill Plumbing will be installed Options: Cast Iron Pump with 5.5 HP Honda Motor
View Details
Aer-8 Linear Aeration System

Aer-8 Linear Aeration System

Aer-8

Aer-8 units are available in 60″ and 78″ widths, either pull-type or 3-point hitch mounted frame styles. The pull-type kit can be outfitted with hydraulic lines directly to the tow vehicle or with an electric/hydraulic power pack. The power pack includes a remote control to the driver’s seat and a battery-charging cable to maintain charge in the battery through repeated use. An additional benefit is water conservation. Voids in the soil capture rain or irrigation for maximum moisture utilization and run-off prevention. Hillsides and fairway mounds are lush and green again. Wet spots are opened and evaporation rates increased to bring the soil moisture back into balance and the area back into full utilization.
View Details
Sand Star E 48V Lithium

Sand Star E 48V Lithium

Sand Star E

Benefits Eco-Friendly The Sand Star E, equipped with a lithium battery pack, offers the quietest and most eco-friendly groomer in the market. Technology The Sand Star E is features an industrial-grade motor and controller. The onboard diagnostics exceeds all industry standards. Durability Superior construction and materials combine to ensure industry-leading longevity across our product lines Reliability Family-owned since 1967, Smithco products are built to last. Great people make great products. Exclusize Features Battery The Sand Star E incorporates the Roy-PowTM 160 amp lithium battery pack, with an on-board battery management system, supported by a five-year manufacturer’s warranty. On Board Diagnostics The Sand Star E’s on-board diagnostic system lets you quickly and easily identify solutions in various subsystems - saving you time and money. Dual-Pedal Traction The Sand Star E’s exclusive dual traction pedal gives the operator the ability to smoothly transition from forward to reverse making for hands-free operation, allowing the operator the ability to focus on steering and plowing. Motor The Sand Star E is a re-engineered electric bunker rake utilizing state-of-the-art, industrial-grade motor and controller technology, while delivering superior and reliable power for even the toughest jobs. Options 45-004-A Certified ROPS w/Seat Belts 851-100 Light Kit 85-006 Sand Cultivator (Straight Blades) 85-007 Infield Scarifier (gauge wheels, vertical blades) 85-008 Sand Cultivator (with Spring Tine Teeth) 85-013 Infield Scarifier (with Spring Tine Teeth, gauge wheels) 925-110 Actuator f/Center Mount Implements Batteries Type Roy Pow 48V 160 Ah Lithium Battery Pack' 5 Year Warranty Nominal Voltage 51V Nominal Voltage 160Ah Stored Energy (Wh/kg) 8.2kWh Dimension (LxWxH) 31.5"x14.25"x8.75" Weight 159 lbs Speed Forward Speed 0-10 mph Reverse Speed 0-5 mph Motor Type Mahle Displacement 48V; Continuous AC Induction Peak Torque 83nm Current Sevcon Gen 4, Size 4, 450A 2min 540A Boost Weights and Dimensions Length 68" Width 58" Height 52" Weight 735 lbs. with batteries Wheel Base 42” Ground Clearance 5.5” – 7” under Cultivator, depending on attachment.
View Details
Sand Star Hydraulic Series

Sand Star Hydraulic Series

Sand Star Series

PERFECTLY BALANCED Smithco's drive system on 3 wheel drive models makes for superior traction and increased stability. CHOICE OF 4 MODELS in both 2 and 3 wheel drive, offering 16 or 18 hp gasoline engines and 19 hp diesel. MORE IMPLEMENTS Widest range of implements for grooming. SAND STAR I 16 hp Vanguard twin-cylinder gasoline engine, 2 wheel hydraulic parallel drive system, hydraulic operation of all rear & center mounted implements. Mechanical steering, “ Speed Boss” speed control system, “Pro Pedal” engine throttle system & remote Cyclo-Pac air intake system. Specifications SAND STAR II 18 hp Vanguard twin-cylinder gasoline engine, 2-3 wheel hydraulic parallel drive system thru selector valve, hydraulic operation of all rear & center mounted implements. Mechanical steering, “Speed Boss” speed control system, “Pro Pedal” engine throttle system & remote Cyclo-Pac air intake system. Specifications SAND STAR IV 18 hp Vanguard twin-cylinder gasoline engine, 3 wheel hydraulic series/parallel drive system, hydraulic operation of all rear & center mounted implements. Hydraulic power steering, “Speed Boss” speed control system, “Pro Pedal” engine throttle system & remote Cyclo-Pac air intake system. Specifications SAND STAR DIESEL 18 hp Kubota D722 three-cylinder, liquid-cooled diesel engine, 3 wheel hydraulic series/parallel drive system, hydraulic operation of all rear & center mounted implements. Hydraulic power steering, “Speed Boss” speed control system, “Pro Pedal” engine throttle system & remote Cyclo-Pac air intake system. Specifications
View Details
Spray Star 1110

Spray Star 1110

Spray Star 1110

View Details
Spray Star 2000

Spray Star 2000

Spray Star 2000

SMITHCO PULSE WIDTH MODULATION ADVANCED RATE CONTROL/NOZZLE SYSTEM WITH CHOICE OF EITHER: Automatic Field Computer Spray Control System (Star Command 1-a) Automatic Matrix GPS Guided Field Spray Controller (Star Command II-a) SPRAY STAR 2000 WITH STAR COMMAND II-A SYSTEM & 18.5 FOOT (5.5M) SPRAY BOOM (GASOLINE ENGINE POWER) Advanced precision TeeJet Matrix GPS Satellite guided Field Computer. Terra Star Antenna for use with GS, WAAS & Glonass Satellites. Provides Sub-2 in (5 cm) position control and permanently retained mapping. Smithco/TeeJet DynaJet Pulse Width Modulation. Pressure & droplet size control. Wide ground speed range. Purpose-built 18 ft (5.5 meter) Spray Boom. Dual Nozzle-Dual Solenoid Valve System. SPRAY STAR 2000 WITH STAR COMMAND I-A SYSTEM & 20 FOOT (6 M) SPRAY BOOM (GASOLINE ENGINE POWER) Advanced Rate Control Field Computer (TeeJet Radion 8140) with DynaJet Pulse Width Modulation System. Presssure and droplet size control. Wide range of ground speed. Purpose-built spray boom with dual nozzles and dual solenoid valves. SPRAY STAR 2000 WITH STAR COMMAND I SYSTEM & 18.5 FOOT (5.5M) SPRAY BOOM (GASOLINE ENGINE POWER) Same extreme application ability as Model 2007 G/D (Above) except 20 ft./6m Spray Boom. STAR COMMAND FEATURES No one matches our 9 years of experience developing the most precise application available for spraying chemicals on turf. With our Partner, TeeJet® Technologies, the Star Command System features all of TeeJet’s® previous benefits available on every Star Command sprayer, as well as these exclusive new features: TURN COMPENSATION  corrects flow to keep application rates on target through turns as tight as 20 feet. It lets you avoid straight- line applications on contoured area or rates varying as much as 50% from the inside to the outside of a boom. That doubles the application rate on the inside and cuts the outside rate in half. TEN INCH NOZZLE SPACING  to cut off-target applications in half. This spacing also allows for more efficacy because of increased overlap of the spray patterns. VIRTUAL, ON-SCREEN NOZZLE CONTROL.  TeeJet’s® new job computers operate up to 100 nozzle sections that can be controlled individually. This eliminates the need for extra cabling and job-stopping failure of mechanical switches. THE DYNAJET SYSTEM  is also incorporated into the Matrix 908 controller, eliminating extra cabling and separate controller. TERRASTAR-C PRO  significantly reduces Convergence Time, to as little as 90 seconds or less. View Specifications
View Details
Sweep Star 48

Sweep Star 48

Sweep Star 48

48" Wide Riding Sweeper Self-propelled, 3-wheel design Extremely Maneuverable 3-wheel design makes sweeping easy around trees, fences, buildings or any other obstacle. More Power 18 hp (13 kW) twin-cylinder gasoline engine Easy to Use High-lift 1.75 cubic yard dump raises to 65” for easy disposal of trash Specifications Models 48-500AB Sweep Star 48H Brush Reel 48-500AF Sweep Star 48H Finger Reel Power 18 hp twin-cylinder, OHV, air-cooled gasoline engine with double action air intake filtration. (Engine mounted plus remote cyclonic filtration system). Configuration Self contained, three-wheel, tri-cycle configuration with front steering, two rear drive wheels and rear mounted high lift debris hopper. Debris Hopper Capacity – 1.75 cubic yards | Construction – 14 gauge steel formed panels High capacity airflow openings at top and rear | Dump - Hydraulic raise / lower debris hopper to dump height to 6’4″ above the ground to dump debris into refuse container. Sweeper Head 48″ wide; belt-driven single rotating reel; adjustable sweeping height; follows terrain on dual caster wheel. Choice of Rubber finger sweep reel with 96 flexible fingers (Model CF) — or — Nylon bristle brush sweep reel (Model CB) Drive Hydrostatic variable speed pump. Direct coupling to engine. Drives to two, rear mounted Parker heavy duty / high-efficiency hydraulic drive motors on rear wheels. Single hydraulic traction pedal for forward and reverse drive Speed Infinitely variable Forward 0-10 mph Reverse 0-3 mph Braking Dynamic braking through the hydraulic drive system; Manually operated disc type parking brake on rear wheels Battery Automotive Type 24F, 12-volt (battery not included with ocean or air shipment) Construction Hydraulically formed, electrically welded heavy wall steel tubing. Tires & Wheels Front: (1) 18-9.50 x 8 Multi-ribs Rear: (2)23-1050×12 Soft-trac Casters (2) 9 x 3.5 x 4 Steering Manual chain drive with 9.3:1 reduction, 15 in diameter, soft grip automotive type steering wheel. Instrumentation Hydraulic levers to lift/lower debris hopper, open/close debris hopper tailgate and raise/lower of sweeping mechanism head assembly. Hour meter. Controls Single hydraulic traction pedal for forward and reverse Hand-operated throttle control Seat High-back, single-piece construction. Adjustable operator position Electrical 12-volt, electronic key start Sound Level 90 dbA Dimensions Length: 121 in | Width: 66 in | Height: 84 in | Wheel Base: 70 in Weight 1900 lbs. Liquid Capacities Hydraulic system oil: 5 gallons in high-density polyethylene tank. Gasoline (unleaded): 6 gallons in high-density nylon low-perm tank Safety ROPS with operator seat belt Battery located outside of engine, hydraulic compartment. Fire proof fuel lines, hydraulic lines covered with abrasion and leak resistant tube. Fire extinguisher. Operator presence switch in seat for engine start. Complies with all applicable ANSI, OSHA and European Machinery DIrective standards. Options 48-501 Hopper Dust Shield | 48-502 48H Nylon Brush Head , 4 rows of 5″ bristles | 48-503 48H Rubber Finger Reel, 96 Flexible Rubber Fingers
View Details
10 - 18 of 40