Steiner | Redexim | Turfco | Case Ih | Capillary Flow | Simonsen | Smithco Products

BFT8024STA Truck Mounted Top Auger

BFT8024STA

Available in 304 and 409 stainless steel, the BFT8024STA is a truck mounted top delivery auger tender that has three 8 ton compartments instead of four 6 ton compartments. The 10X13X10 delivery auger system, large trap openings, and steep slopes combine to offer unloading speeds of up to #3500 per minute. The rotating delivery auger allows for filling of multiple compartments without the need for repositioning. The 20 foot delivery auger will make filling any applicator easy. Discharge heights of over 20 feet high and a long reach allow applicators to park away from the tender keeping your equipment and personnel safe from harm. Overview 800 cubic foot capacity (24 ton). 3 standard eight ton compartments with splits available (6 compartments total). 6" higher sides available. 14"X18" stainless steel slide gates. Stainless steel hopper, auger tubes, and flighting. 10"X13"X10" auger system. 19 foot long discharge auger. Discharge rate of up to #3500 per minute. Large pit dump/cleanout on the vertical auger. Hydraulic raise/lower/turn on delivery auger. Hydraulic controls located at the rear drivers corner. Heavy duty hydraulic system with tandem hydraulic pump. 40 degree side slopes for thorough cleanout. Full length fold down catwalks available. Large hydraulic reservoir to keep your oil cool. Full length fenders. Manual or electric roll tarps available. Separate dry chemical tender available.

$0.00

View Details

BFT8424STA Truck Mounted Top Auger

BFT8424STA

Available in 304 and 409 stainless steel, this 24 ton truck mounted top delivery auger fertilizer tender is designed to give you the capacity you need when pulling a trailer just isn't right for your operation. Keeping your tender truck mounted makes access onto country roads and narrow field entrances much easier when compared to a trailer. The 10X13X10 delivery auger system, large trap openings, and steep slopes combine to offer unloading speeds of up to #3500 per minute. The rotating delivery auger allows for filling of multiple compartments without the need for repositioning. The 20 foot long delivery auger will make filling any applicator easy. Discharge heights of over 20 feet high and a long reach allow applicators to park away from the tender keeping your equipment and personnel safe from harm. Blue color is standard but other colors are available upon request. Overview 840 Cubic foot capacity (24 ton) 4 standard six foot compartments with splits available (up to 8 total compartments) 6" higher side option available. 14"X18" stainless steel slide gates. Stainless steel hopper, auger tubes, and flighting. 10"X13"X10" stainless steel auger system. Unloading rate of up to #3500 per minute Heavy duty tandem pump. Heavy duty hydraulics with liquid filled gauges located on the rear passenger corner for easy operation. Heavy duty hydraulic motors are isolated from the fertilizer to minimize maintenance and prolong their useful life. Hydraulic raise/lower on the delivery auger. Hydraulic power turn on the vertical auger. Large pit dump/cleanout on the vertical auger. Removable cleanout cover between vertical and delivery augers. Stainless Steel hopper, slide gate assemblies, auger tubing, and auger flighting. Full length fold down catwalks available. Large hydraulic reservoir. Full length fenders. Manual or electric roll tarps available. Dry chemical bin option available.

$0.00

View Details

Capillary Bunkers

Increase the longevity of the bunker sand and ensure that it always looks clean and fresh with the Capillary Bunker Liner. This liner, when used alonside their Wash Box allows for the bunker sand to be washed clean should there ever be any contamination from outside of the bunker (soil, dust, grass etc.). Main Benefits: Decreased Maintenence Consistent Performance Longer Lifespan of Bunker Sand Quick and Easy Installation Eliminates Offers • Washouts • Beautiful bunkers • Flooding • Consistent performance • Soil contamination • Improved playability • Inconsistent moisture levels • Pristine bunker sand • Plugged ball lies • Maintained design integrity • The need to replace sand due to contamination • Extended sand life • Excessive maintenance Testimonial "When we started discussing our renovation options, I had several goals. The first was to solve design problems to make the bunkers less prone to washout and improve maintainability. My second goal was to ensure we sourced high-quality sand pure of impurities and performed well during rain and for play. Improved drainage was also a major component of our project. Finally, I was committed to using a premium bunker liner to improve performance during rain events and prevent contamination. We selected Capillary Concrete to line our bunkers for several reasons. First, it comes as a homogenous mixture, making the product easier and more consistent to install than other options. Second, on the list is the value. Considering all the effort in a project of this scope, I didn't want to cut any corners. Capillary Concrete was the best value in having a premium product that would stand the test of time at an affordable installed cost. Speaking of the test of time- Capillary Concrete came with an unmatched ten-year warranty! After seeing the product installed, I am confident we could easily install the product in-house if we chose to do so. The product support has been fantastic throughout the three phases of our project at Hyperion. We always had a representative on-site to ensure the product was delivered and installed to specifications. Finally, the payoff has been tremendous. A rain event that once took days to restore now takes just a couple of hours. Our members can now have fantastic bunkers to play out of within hours of a thunderstorm rather than all week. My biggest payoff has been improved course conditions since we now have more time to address other details. Finally, if member satisfaction were quantifiable, I'd say the project has paid for itself several times in just a few years." -Jim Sedrel, CGCS Hyperion Field Club Johnston, IA

$0.00

View Details

Nutri-Tiller 5310

5310

The Nutri-Tiller lineup manages crop residue, enhances soil tilth and improves fertilizer placement for maximum nutrient efficiency. The new 955 and enhanced 5310 are your one-pass seedbed solutions to effectively manage time, resources and inputs for improved productivity and greater return on investment. View Brochure Compare Specifications

$0.00

View Details

Nutri-Placer 920

920

The Case IH Nutri-Placer 920 features an AE 50 award winning, innovative design that is built for productivity. Whether it is the exclusive X-wing fold that allows easier movement from field to field or the commercial quality frame, control systems and attachments, the Nutri-Placer 920 is built to cover more acres per day. Type: Preplant Working Width: 42' 6" to 62' 6" (13.0 to 19.1) Tank Capacity: 1,650 and 2,050 gal (6,246 and 7,760L) View Brochure Compare Specifications

$0.00

View Details

Nutri-Placer 930

930

The Nutri-Placer 930 has proven ground engaging components for optimal NH 3 placement. In addition to a shank style applicator, it includes a High-speed Low Disturbance (HSLD) coulter option for optimal residue cover and greater productivity. It is available in five widths ranging from 32.5 to 47.5 ft (9.9-14.5 m). Type: Preplant Working Width: 32.5 to 47.5 ft (9.9M to 14.48M) Applicator Style: Shank Style or High-speed Low Disturbance (HSLD) Coulter View Brochure Compare Specifications

$0.00

View Details

Nutri-Placer 940

940

The Nutri-Placer 940 allows you to take control of your nitrogen application. These tough, durable applicators offer commercial quality 6-by-6-inch frames available in five widths ranging from 50 to 65 feet. Choose from a variety of agronomically designed coulter or shank and sealer options to deliver uniform depth and sealing. Type : Preplant Working Width : 50-ft (15.2M) to 65-ft. (19.8M) Applicator Style: Shank Style or High-speed Low Disturbance (HSLD) Coulter View Brochure Compare Specifications

$0.00

View Details

Nutri-Tiller 955

955

The Nutri-Tiller 955 Strip-Till applicator is a one-pass seedbed solution that helps effectively manage time, resources and inputs for improved productivity and greater return on investment. Frame Style: Pull-Type Rows: 8, 12, 16, or 24 row models Working Width: 20 - 60 ft (6 - 18.3 m) Coulters: 24 in (610 cm) View Brochure Compare Specifications

$0.00

View Details

2800 Liquid Fertilizer Applicator

2800

The Nutri-Placer 2800 models provide equal quality and many of the same features that are found on the Nutri-Placer 920, but in a smaller package. These versatile applicators are available in a range of sizes from 17.5 ft. – 37.5 ft. working width. Its intelligent design is constructed for convenience, productivity and durability to meet the specific demands of your operation. Type : Side Dress Working Width : 17.5 to 37.5 ft (5.3 to 11.4 m) Tank Capacity : 850, 1,000 or 1,300 gal (3,218, 3,785, 4,921L) View Brochure Compare Specifications

$0.00

View Details

Declining Weight Blending System

Closeout Sale