Toro | Simonsen | Gsi Intersystems | Progressive Turf Equipment | Capillary Flow | Redexim | Triarc | Hustler Products

BFT8024STA Truck Mounted Top Auger

BFT8024STA

Available in 304 and 409 stainless steel, the BFT8024STA is a truck mounted top delivery auger tender that has three 8 ton compartments instead of four 6 ton compartments. The 10X13X10 delivery auger system, large trap openings, and steep slopes combine to offer unloading speeds of up to #3500 per minute. The rotating delivery auger allows for filling of multiple compartments without the need for repositioning. The 20 foot delivery auger will make filling any applicator easy. Discharge heights of over 20 feet high and a long reach allow applicators to park away from the tender keeping your equipment and personnel safe from harm. Overview 800 cubic foot capacity (24 ton). 3 standard eight ton compartments with splits available (6 compartments total). 6" higher sides available. 14"X18" stainless steel slide gates. Stainless steel hopper, auger tubes, and flighting. 10"X13"X10" auger system. 19 foot long discharge auger. Discharge rate of up to #3500 per minute. Large pit dump/cleanout on the vertical auger. Hydraulic raise/lower/turn on delivery auger. Hydraulic controls located at the rear drivers corner. Heavy duty hydraulic system with tandem hydraulic pump. 40 degree side slopes for thorough cleanout. Full length fold down catwalks available. Large hydraulic reservoir to keep your oil cool. Full length fenders. Manual or electric roll tarps available. Separate dry chemical tender available.

$0.00

View Details

BFT8424STA Truck Mounted Top Auger

BFT8424STA

Available in 304 and 409 stainless steel, this 24 ton truck mounted top delivery auger fertilizer tender is designed to give you the capacity you need when pulling a trailer just isn't right for your operation. Keeping your tender truck mounted makes access onto country roads and narrow field entrances much easier when compared to a trailer. The 10X13X10 delivery auger system, large trap openings, and steep slopes combine to offer unloading speeds of up to #3500 per minute. The rotating delivery auger allows for filling of multiple compartments without the need for repositioning. The 20 foot long delivery auger will make filling any applicator easy. Discharge heights of over 20 feet high and a long reach allow applicators to park away from the tender keeping your equipment and personnel safe from harm. Blue color is standard but other colors are available upon request. Overview 840 Cubic foot capacity (24 ton) 4 standard six foot compartments with splits available (up to 8 total compartments) 6" higher side option available. 14"X18" stainless steel slide gates. Stainless steel hopper, auger tubes, and flighting. 10"X13"X10" stainless steel auger system. Unloading rate of up to #3500 per minute Heavy duty tandem pump. Heavy duty hydraulics with liquid filled gauges located on the rear passenger corner for easy operation. Heavy duty hydraulic motors are isolated from the fertilizer to minimize maintenance and prolong their useful life. Hydraulic raise/lower on the delivery auger. Hydraulic power turn on the vertical auger. Large pit dump/cleanout on the vertical auger. Removable cleanout cover between vertical and delivery augers. Stainless Steel hopper, slide gate assemblies, auger tubing, and auger flighting. Full length fold down catwalks available. Large hydraulic reservoir. Full length fenders. Manual or electric roll tarps available. Dry chemical bin option available.

$0.00

View Details

River Port Fertilizer Unloading and Storage

GSIRPF

SYSTEMS UP TO 1200 TPH From a barge or ship, InterSystems enclosed belt conveyors supported by GSI’s QuickBolt Towers and Catwalks are the proven and dependable solution, easily and safely moving product at speeds of up to 1200 TPH. Ease of maintenance via wrap-around or switchback stairs Standard OSHA-compliant guarding and clearances Speed and ease of operation afford the flexibility to condition product and then direct transfer to rail or truck, or to temporary on-site storage Load out bulk weigh options for quick and accurate loading In-house engineering team for custom solutions If your farm is near a river port, you have the luxury of using the river to unload fertilizer directly into your storage facilities using GSI's custom-built river port fertilizer systems. These systems are designed to be used with either barges or boats, and can quickly and efficiently unload large quantities of fertilizer. In addition to being faster than traditional methods, using a river port to unload fertilizer has the added benefit of being more gentle on the fertilizer itself. This means that your fertilizer will last longer and be more effective when you finally apply it to your fields. If you are interested in using a river port fertilizer system, please contact Davis Equipment today. We would be happy to discuss your specific needs and develop a solution that is perfect for your farm.

$0.00

View Details

Truck House Fertilizer Unloading Solutions

GSITHF

Supporting your customers with an economical solution begins with keeping the product close at hand. Systems can be utilized to fill smooth wall tanks or bulk storage warehouses. InterSystems Receiving Features: En-masse drag conveyors with electric gates Open belt conveyors with moveable trippers GSI’s QuickBolt catwalks for access and conveyor support when storage such as fabric-covered buildings requires long spans Overhead storage ranging from 60 to 300 tons in multiple product compartments 304 Stainless steel equipment construction Galvanized steel structures and platforms InterSystems Unload Systems: Product conditioning to tower storage with weighing and blending capabilities or floor-based blending Blending towers offer an additional straight-through spout to the weigh hopper(s), vertical and horizontal mixers, or a blender bypass to either traffic through lane for blended or straight product Options: Re-elevate Load cells on blenders Oversized gates Impregnation A truck house dry fertilizer offloading system can be a great solution for your unloading needs. With a system like this, you can quickly and easily unload your fertilizer from your truck and onto your property. This can be a great solution for farmers who need to get the job done quickly and efficiently. There are a few things to consider when choosing a truck house dry fertilizer offloading system for your needs. One thing to consider is the size of the system. You need to make sure that the system you choose is large enough to handle the amount of fertilizer you'll be unloading. Davis Equipment offers systems up to 400 tons per hour to meet the needs of even the largest farmers. Another thing to consider is the type of truck you'll be using. Some systems are designed for specific types of trucks. Make sure you choose a system that's compatible with the type of truck you have. Finally, consider the price. Davis Equipment offers competitive pricing on all of our products. Make sure you compare prices before you make your final decision. If you're looking for a truck house dry fertilizer offloading system, Davis Equipment is a great place to start your search. We offer high-quality products at competitive prices. Contact us today to learn more about our systems and find the perfect solution for your needs.

$0.00

View Details

High-Speed Rail Fertilizer Unloading Facilities

GSIHSR

InterSystems’ engineering solutions are tailored to the specific needs of high speed facilities which typically process 800 to 1,200 tons per hour through truck receiving and railroad access. InterSystems Receiving Features: OSHA-compliant enclosed belt conveyors are easy to maintain GSI QuickBolt support towers, platforms and catwalks are erected quickly; choose switch back or wrap-around stairs Fully-automated moveable tripper with a 4:1 turndown motor for quick transitions Standard electrically-driven rack and pinion gates fill micro-bins easily and eliminate manual operation We don‘t stop with state-of-the-art receiving systems. InterSystems’ blending and loadout systems incorporate the speed, accuracy, flexibility, blend quality and cost savings you expect. InterSystems Blending Tower Advantages: Offer multiple NTEP-approved weigh hoppers Allow for extra speed Increase weighing accuracy Eliminate the need to install two towers

$0.00

View Details

Blend Towers

GSIB

STANDARD BLEND TOWER HORIZONTAL MIXING BLEND TOWER HYBRID TOWER ? Storage of up to 300 tons ? Up to 18-ton capacity weigh hopper ? Up to 18-ton vertical tapered auger blenders ? Largest two-stage gates in the industry ? Re-elevate ? Blender bypass ? 2nd lane wholesale spout ? Impregnation ? Galvanized support structure ? 300 tons of storage ? Two 8-ton weigh hoppers ? 8-ton paddle and ribbon high speed, high quality, high efficiency blender ? 16-ton surge hopper ? Blender bypass ? Re-elevate ? 2nd lane wholesale ? Impregnation ? Galvanized support structure ? 300 tons of storage ? Three weigh hopper design: ? Two 16 or 18-ton and ? One 5-ton for micros ? Retail and Wholesale built into one tower ? Blend and Wholesale simultaneously to two lanes without sacrificing speed ? Re-elevate ? Blender bypass ? Impregnation ? Galvanized support structure

$0.00

View Details

Capillary Bunkers

Increase the longevity of the bunker sand and ensure that it always looks clean and fresh with the Capillary Bunker Liner. This liner, when used alonside their Wash Box allows for the bunker sand to be washed clean should there ever be any contamination from outside of the bunker (soil, dust, grass etc.). Main Benefits: Decreased Maintenence Consistent Performance Longer Lifespan of Bunker Sand Quick and Easy Installation Eliminates Offers • Washouts • Beautiful bunkers • Flooding • Consistent performance • Soil contamination • Improved playability • Inconsistent moisture levels • Pristine bunker sand • Plugged ball lies • Maintained design integrity • The need to replace sand due to contamination • Extended sand life • Excessive maintenance Testimonial "When we started discussing our renovation options, I had several goals. The first was to solve design problems to make the bunkers less prone to washout and improve maintainability. My second goal was to ensure we sourced high-quality sand pure of impurities and performed well during rain and for play. Improved drainage was also a major component of our project. Finally, I was committed to using a premium bunker liner to improve performance during rain events and prevent contamination. We selected Capillary Concrete to line our bunkers for several reasons. First, it comes as a homogenous mixture, making the product easier and more consistent to install than other options. Second, on the list is the value. Considering all the effort in a project of this scope, I didn't want to cut any corners. Capillary Concrete was the best value in having a premium product that would stand the test of time at an affordable installed cost. Speaking of the test of time- Capillary Concrete came with an unmatched ten-year warranty! After seeing the product installed, I am confident we could easily install the product in-house if we chose to do so. The product support has been fantastic throughout the three phases of our project at Hyperion. We always had a representative on-site to ensure the product was delivered and installed to specifications. Finally, the payoff has been tremendous. A rain event that once took days to restore now takes just a couple of hours. Our members can now have fantastic bunkers to play out of within hours of a thunderstorm rather than all week. My biggest payoff has been improved course conditions since we now have more time to address other details. Finally, if member satisfaction were quantifiable, I'd say the project has paid for itself several times in just a few years." -Jim Sedrel, CGCS Hyperion Field Club Johnston, IA

$0.00

View Details

Verti-Drain® 1513

111.215.013

The lightweight Verti-Drain® 1513 can work to a depth of 6” / 150mm and is well suited to sensitive turf surfaces. The belt driven machine operates a high speed while giving a neat and consistent hole pattern. An optional rear roller can be added to smooth the surface and leave a neat finish. High-speed machine Lightweight machine with low HP requirements Integrated parking stands for ease of operation Specifications SKU 111.215.013 Working width (m) 1.32 Working width (inch) 52 Max. Working depth (mm) 150 Max. Working depth (inch) 6 Working speed at hole spacing 65 mm (km h) 2.12 Working speed at hole spacing 2 1 2 inch (mph) 1.3 Weight (kg) 448 Weight (lbs) 985 Hole distance with 12 mm tines (mm) 55 Hole distance with 1 2 x 6 inch tines (inch) 2.17 Hole spacing distance driving direction (mm) 25 - 125 Hole spacing distance driving direction (inch) 1-7.5 Max. Diameter solid tine (mm) 12 x 150 Max. Diameter solid tine (inch) 1/2 x 6 Max. Diameter hollow tine (mm) 19 x 150 Max. Diameter hollow tine (inch) 3/4 x 6 Min. Tractor HP required 25 Min. Lifting capacity 610 mm behind the lifting eyes (kg) 500 Min. Lifting capacity 24 inch behind the lifting eyes (lbs) 1102 Max. capacity with spacing 65 mm (m² hr) 2822 Max. capacity with spacing 2 1 2 inch (ft² hr) 30374 Three-point hitch 3-point CAT 1 Rpm Max. 540 Gearbox oil 80W90 - 0.9L Lubricant EP 2 Dimensions (width mm) 970 Dimensions (height mm) 780 Dimensions (length mm) 1610 Dimensions (width inch) 38.2 Dimensions (height inch) 30.7 Dimensions (length inch) 63.4 Standard Components Description Quantity Toolbox with combi tool and manual 1 PTO Shaft 1 Storage Legs 1 Solid Tine 12x150mm (1/2x6") 24

$0.00

View Details

Pro-Flex 120

Overview The Pro-Flex 120 is the most widely used pull-behind contour finishing mower. It has become the 'go-to' contour and rough mower due to its reliability, a 10' wide cut, and its versatility. With 5 independent floating decks, the Pro-Flex 120 will easily follow contour changes that are found on golf courses and campuses, producing a uniform quality cut that is demanded by Superintendents and members alike. The Pro-Flex 120 has several standard features that are important on a pull-behind contour mower, but are only available from Progressive! Utilizing the tractor for other tasks is a key advantage so we made connecting a Pro-Flex 120 to the tractor easy, thanks to an adjustable clevis, a low tongue weight, and an auto-lock PTO shaft. Originally introduced in 1999, the Pro-Flex 120 is well known as a durable, reliable rotary finishing mower that is now easier to maintain than ever before. The Pro-Flex 120 is “The Better Built Choice”. Benefits Contour Mowing Ultimate contour following due to five independent decks, allowing for a world-class cut and excellent clipping dispersal. Ideal for Making a Stepped or a Transition First-Cut Being able to quickly and easily set each individual deck height gives the opportunity to do two jobs in one pass! Pro Lift-N-Turn™ An industry exclusive feature – not found on other contour mowers! Pro Lift-N turn™ allows the decks to be raised slightly off the ground with the PTO still engaged. Crossing a cart path or other minor obstacles has never been easier. Smart by Design Innovative designs only found on Progressive mowers, help their customers do more in less time and at less cost! Easy Routine Maintenance Progressive's goal is to keep their customers mowing and not spend time performing routine maintenance. Reducing the number of grease points and using extended service interval PTO shafts are but two of the ways we minimize maintenance time and cost. Part Number: 601205 (Red) or 602711 (Green) (North America) / 601205D (Red) or 602711 (Green) (Worldwide) Recommended PTO H.P.: 30 to 40 Mowing Capacity (*Assumes no overlap or turning): 4 mph 4.4 acres per hour * 6 mph 6.5 acres per hour * Cut Height Range: 1" - 3 1/4" Cutting Width: 10' Turning Radius: 16" uncut circle Transport Width: 8' 6" Transport Tires: 18.5 X 8.5 - 8 4ply Transport Height: 4' 2" Weight: 2075 lbs Transport Length: 11' Std. Equipment: 5 Independent floating 28”diameter decks to follow all contours. Quick adjust swivel hitch, allows mower to follow contours without interference from tractor. Heavy-duty construction, open rear-discharge with adjustable deflectors. Rubber damped, automatic belt tensioners on all belts. Pro Lift-N-Turn™ allows the operator to temporarily raise the decks slightly off the ground without stopping and with the PTO still engaged. Ideal for crossing cart paths or when engaging the PTO. Puncture proof tires, 10”dia x 4”wide (4 per deck) mounted on greaseable tapered roller bearings. Deck shock absorbers, able to cut at high speeds yet maintain consistent quality cut. Able to cut while backing up, this allows cutting in corners and other hard to reach areas. CV input shaft system for easy connection to any tractor. Maintenance free blade spindle assemblies for reduced maintenance. High lift blades for superior cut. Blade tip Speed 18,600 FPM. Anti-Scalp Rollers on front and back of each deck. Anti-Scalp Skids on both sides of each deck Opt. Equipment: 606501 Mulch Kit complete with mulching blades not installed 606502 Mulch shut off plate kit (No mulch blades included) not installed 600526 Mulch Blade Kit (Four black left hand and one red right hand blades) 600517 High Lift Blade Kit (Four black left hand and one red right hand blades) 600524 Pro-Flex Belt Kit – for the complete mowerMulch Kit complete with mulching blades not installed

$0.00

View Details

Declining Weight Blending System

Closeout Sale