Redexim, Turfco, Capillary Flow, B&B Trailers, Precision Tank, Progressive Turf Equipment - Steiner

Increase the longevity of the bunker sand and ensure that it always looks clean and fresh with the Capillary Bunker Liner.  This liner, when used alonside their Wash Box allows for the bunker sand to be washed clean should there ever be any contamination from outside of the bunker (soil, dust, grass etc.). Main Benefits: Decreased Maintenence Consistent Performance Longer Lifespan of Bunker Sand Quick and Easy Installation Eliminates Offers • Washouts • Beautiful bunkers • Flooding • Consistent performance • Soil contamination • Improved playability • Inconsistent moisture levels • Pristine bunker sand • Plugged ball lies • Maintained design integrity • The need to replace sand due to contamination • Extended sand life • Excessive maintenance Testimonial "When we started discussing our renovation options, I had several goals. The first was to solve design problems to make the bunkers less prone to washout and improve maintainability. My second goal was to ensure we sourced high-quality sand pure of impurities and performed well during rain and for play. Improved drainage was also a major component of our project. Finally, I was committed to using a premium bunker liner to improve performance during rain events and prevent contamination. We selected Capillary Concrete to line our bunkers for several reasons. First, it comes as a homogenous mixture, making the product easier and more consistent to install than other options. Second, on the list is the value. Considering all the effort in a project of this scope, I didn't want to cut any corners. Capillary Concrete was the best value in having a premium product that would stand the test of time at an affordable installed cost. Speaking of the test of time- Capillary Concrete came with an unmatched ten-year warranty! After seeing the product installed, I am confident we could easily install the product in-house if we chose to do so. The product support has been fantastic throughout the three phases of our project at Hyperion. We always had a representative on-site to ensure the product was delivered and installed to specifications. Finally, the payoff has been tremendous. A rain event that once took days to restore now takes just a couple of hours. Our members can now have fantastic bunkers to play out of within hours of a thunderstorm rather than all week. My biggest payoff has been improved course conditions since we now have more time to address other details. Finally, if member satisfaction were quantifiable, I'd say the project has paid for itself several times in just a few years." -Jim Sedrel, CGCS Hyperion Field Club Johnston, IA

The lightweight Verti-Drain® 1513 can work to a depth of 6” / 150mm and is well suited to sensitive turf surfaces. The belt driven machine operates a high speed while giving a neat and consistent hole pattern. An optional rear roller can be added to smooth the surface and leave a neat finish. High-speed machine Lightweight machine with low HP requirements Integrated parking stands for ease of operation Specifications SKU 111.215.013 Working width (m) 1.32 Working width (inch) 52 Max. Working depth (mm) 150 Max. Working depth (inch) 6 Working speed at hole spacing 65 mm (km h) 2.12 Working speed at hole spacing 2 1 2 inch (mph) 1.3 Weight (kg) 448 Weight (lbs) 985 Hole distance with 12 mm tines (mm) 55 Hole distance with 1 2 x 6 inch tines (inch) 2.17 Hole spacing distance driving direction (mm) 25 - 125 Hole spacing distance driving direction (inch) 1-7.5 Max. Diameter solid tine (mm) 12 x 150 Max. Diameter solid tine (inch) 1/2 x 6 Max. Diameter hollow tine (mm) 19 x 150 Max. Diameter hollow tine (inch) 3/4 x 6 Min. Tractor HP required 25 Min. Lifting capacity 610 mm behind the lifting eyes (kg) 500 Min. Lifting capacity 24 inch behind the lifting eyes (lbs) 1102 Max. capacity with spacing 65 mm (m² hr) 2822 Max. capacity with spacing 2 1 2 inch (ft² hr) 30374 Three-point hitch 3-point CAT 1 Rpm Max. 540 Gearbox oil 80W90 - 0.9L Lubricant EP 2 Dimensions (width mm) 970 Dimensions (height mm) 780 Dimensions (length mm) 1610 Dimensions (width inch) 38.2 Dimensions (height inch) 30.7 Dimensions (length inch) 63.4 Standard Components Description Quantity Toolbox with combi tool and manual 1 PTO Shaft 1 Storage Legs 1 Solid Tine 12x150mm (1/2x6") 24

Overview The Pro-Flex 120 is the most widely used pull behind mower for contour finishing. It has become the 'go-to' rough cutter and golf course mower due to its reliability, a 10' wide cut, and its versatility. With 5 independent floating decks, the Pro-Flex 120 will easily follow contour changes found on golf courses and campuses, producing a uniform quality cut that is demanded by Superintendents and members alike. Whether you're using it as a golf course greens mower or a fairway mower, it consistently delivers the performance you need.  The Pro-Flex 120 has several standard features that are important on a pull behind mower, but are only available from Progressive! Utilizing the tractor for other tasks is a key advantage, so we made connecting a Pro-Flex 120 to the tractor easy, thanks to an adjustable clevis, a low tongue weight, and an auto-lock PTO shaft.  Originally introduced in 1999, the Pro-Flex 120 is well known as a durable, reliable rotary finishing mower that is now easier to maintain than ever before. The Pro-Flex 120 is “The Better Built Choice” for both golf course grass cutters and other turf care professionals.  Benefits Contour Mowing Ultimate contour following due to five independent decks, allowing for a world-class cut and excellent clipping dispersal.   Ideal for Making a Stepped or a Transition First-Cut Being able to quickly and easily set each individual deck height gives the opportunity to do two jobs in one pass!   Pro Lift-N-Turn™ An industry exclusive feature – not found on other contour mowers! Pro Lift-N turn™ allows the decks to be raised slightly off the ground with the PTO still engaged. Crossing a cart path or other minor obstacles has never been easier.   Smart by Design Innovative designs only found on Progressive mowers, help their customers do more in less time and at less cost!   Easy Routine Maintenance Progressive's goal is to keep their customers mowing and not spend time performing routine maintenance. Reducing the number of grease points and using extended service interval PTO shafts are but two of the ways we minimize maintenance time and cost. Part Number: 601205 (Red) or 602711 (Green) (North America) / 601205D (Red) or 602711 (Green) (Worldwide) Recommended PTO H.P.: 30 to 40 Mowing Capacity (*Assumes no overlap or turning): 4 mph 4.4 acres per hour * 6 mph 6.5 acres per hour * Cut Height Range: 1" - 3 1/4" Cutting Width: 10' Turning Radius: 16" uncut circle Transport Width: 8' 6" Transport Tires: 18.5 X 8.5 - 8 4ply Transport Height: 4' 2" Weight: 2075 lbs Transport Length: 11' Std. Equipment: 5 Independent floating 28”diameter decks to follow all contours. Quick adjust swivel hitch, allows mower to follow contours without interference from tractor. Heavy-duty construction, open rear-discharge with adjustable deflectors. Rubber damped, automatic belt tensioners on all belts. Pro Lift-N-Turn™ allows the operator to temporarily raise the decks slightly off the ground without stopping and with the PTO still engaged. Ideal for crossing cart paths or when engaging the PTO. Puncture proof tires, 10”dia x 4”wide (4 per deck) mounted on greaseable tapered roller bearings. Deck shock absorbers, able to cut at high speeds yet maintain consistent quality cut. Able to cut while backing up, this allows cutting in corners and other hard to reach areas. CV input shaft system for easy connection to any tractor. Maintenance free blade spindle assemblies for reduced maintenance. High lift blades for superior cut. Blade tip Speed 18,600 FPM. Anti-Scalp Rollers on front and back of each deck. Anti-Scalp Skids on both sides of each deck Opt. Equipment: 606501 Mulch Kit complete with mulching blades not installed 606502 Mulch shut off plate kit (No mulch blades included) not installed 600526 Mulch Blade Kit (Four black left hand and one red right hand blades) 600517 High Lift Blade Kit (Four black left hand and one red right hand blades) 600524 Pro-Flex Belt Kit – for the complete mowerMulch Kit complete with mulching blades not installed

Overview The Progressive TD65-2 is a tri-deck finish mower designed to maintain large areas quickly and economically. With a 12' wide cutting swath, the TD65-2 is capable of mowing over 60 acres in an 8 hour day at speeds up to 6 miles per hour. Three independent floating mower decks mounted on a transport frame follow the ground conditions found in school yards, recreation areas, and corporate campuses. The TD65-2 produces a professional after cut appearance. When you are not mowing, the mower can be quickly disconnected from the tractor, increasing the utilization of the tractor for other tasks. Similarly, reconnection is quick and simple. Now that's value! Progressive designed the TD65-2 mowing deck to assist the even dispersion of clippings through the open rear discharge area - avoiding clumping and windrows. Only minutes are required to change the TD65-2 cutting height from 1" to 5" without the use of tools. For convenience and safety, all transport and mowing functions are activated without the operator leaving the tractor's seat. Optional transport tires and fenders are available if the mower needs to be towed longer distances. Overall Hook-Up Made Easy: Knowing your tractor may be used for other tasks, we made the connection process simple.   Easy to Transport and Maintain Progressive has made your uptime our passion. Always pushing the envelope with innovative options that keeps the end user in the field longer.   A Superior Cut for a Superior Finish The selection of blade for your mower is critical. Progressive has different options of blades to suit all different needs.   Cut More in a Shorter Amount of Time With a 12ft cutting width, the TD65-2 is able to cut in 8.7 acres of grass an hour.   Ease Of Maintenace Incorporating designs that are field proven and components that are used on much larger mowers – up to 36’ wide, Specifications Part Number: 526512B (North America) 526512D (Worldwide) Recommended PTO H.P.: 25 to 40 Mowing Capacity: * (Assumes no overlap or turning) 2 mph 2.9 acres per hour * 4 mph 5.8 acres per hour * 6 mph 8.7 acres per hour * Cut Height Range: 1" to 5" Cutting Width: 12' Turning Radius: 24" uncut circle Transport Width: 7' 6" Transport Tires: 18 X 9.50 X 8 NHS, 6 ply, Turf Saver Tires Transport Height: 5' 6" Weight: 2380 lbs Transport Length: 14' Opt. Equipment: 522311 Heavy Duty Transport Tires (in lieu of standard tire factory installed) 521811 Spare - Heavy Duty Transport Tire (20.5 x 8 -4 ply) (must order 2 if replacing standard tire – requires corner pin p/n 521811) 522604 High Lift Blade Kit (replacement set of 7 fixed black blades) 522607 Low Lift Blade Kit (replacement set of 7 fixed blades) 522506 Mulching Kit – (Requires 522612 Mulch Blade Kit) not installed 522612 Mulch Blade Kit (set of 7 blades)

Overview Progressive’s 12 foot Tri-Deck Roller Mower (TDR-12) is designed to maintain wide area mowing venues that require a superlative after cut appearance. The superior quality of cut, coupled with the TDR-12’s rugged construction, ease of maintenance and use give the TDR-12 the versatility to tackle a wide variety of mowing applications in parks, sports fields, and corporate campuses. The TDR-12’s full length rollers, which allow the mower to cut as low as ½” while simultaneously rolling and striping the mowing surface. Higher mowing speeds are often possible as the bounce from pneumatic tires are eliminated, making quick work of big jobs. Cutting heights are quick and simple to set with the supplied tool to any height from ½” to 4”. The TDR-12 is another example of the ingenuity and quality that goes into producing a durable, reliable rotary finishing mower that is easy to maintain. The TDR-12 is not only a Value and Performance leader, it is “The Better Built Choice” Benefits Pro Lift-N-Turn™ An industry exclusive feature – not found on other contour mowers! Pro Lift-N turn™ allows the decks to be raised slightly off the ground with the PTO still engaged. Crossing a cart path or other minor obstacles has never been easier.   Superior Cut Quality and Striping TDR-12’s high tip speed blades provide superior cut quality while heavy duty rollers produce bold recognizable stripes.   Worry Free Maintenance Maintenance free blade spindles, and PTO Shafts requiring lengthy intervals between greasing, reduces maintenance but provides you with the same reassurance of performing daily maintenance.   PTO Connection The Constant Velocity (CV) input PTO and auto-lock PTO coupler makes connecting the mower to a tractor easier while providing extra protection to the driveline by minimizing vibration when turning. Specifications Part Number: 528712B (North America) / 528712D (Worldwide) Recommended PTO H.P.: 25 to 40 Mowing Capacity (*Assumes no overlap or turning): 2 mph 2.9 acres per hour * 4 mph 5.8 acres per hour * 6 mph 8.7 acres per hour * Cut Height Range: 1/2" to 4" Cutting Width: 12' Turning Radius: 24" uncut circle Transport Width: 7' Transport Tires: P275 / 60 R15 automotive tires Transport Height: 7' 6" Weight: 3400 lbs Transport Length: 14' Std. Equipment: Heavy-duty construction, open rear-discharge, easy cutting height adjustment. Heavy-duty 6” dia. rollers supported by 2 - 1.25” ductile flange bearings. Maintenance free blade spindle assemblies for reduced maintenance. High lift blades for superior cut. All decks turn the same direction for control of discharge Blade tip speed 18,287 FPM. Transport tires: P275/60 SR15. CV input shaft system for easy connection to any tractor Opt. Equipment: 528153 Fender kit (both sides), with provision to mount lights 522604 High Lift Blade Kit (replacement set of 7 fixed, black left-hand blades)

Overview The Progressive SDR-65 is a three point hitch version of the popular tri-deck TDR-15 mower and it utilizes many of the same components. Not to be confused with other, light duty three point hitch mowers that are available, the SDR-65 has a 6” diameter rollers on both the front and rear across the full width of the deck. Ideal for smaller mowing jobs where a quality cut is mandatory, the SDR’s rollers allow you to cut as low as ½”, while simultaneously striping and rolling the mowing surface. To minimize service requirements, the SDR-65 is equipped with field proven maintenance free blade spindles. Progressive’s SDR-65 mower is another example of the ingenuity and quality that goes in to producing a durable, reliable rotary finishing mower that is easy to maintain. It shows once again why the SDR-65 is “The Better Built Choice”. Benefits Easy Height Adjustment Infinite cutting height adjustment from ½” to 4”.   Full Width Rollers The rollers will stripe the turf, leaving a pleasing visual impact for the facilities patrons – a testament to the professionalism of the job.   High Blade Tip Speed Progressive’s high tip speed provides a clean even cut at ground speeds up to 6 miles per hour for the high productivity users have come to appreciate from a Progressive mower.   Simpler Maintenance = Lower Cost Maintenance Free Blade Spindles and sealed roller-end bearings are used to lower both the cost and time spent on routine maintenance. Specifications Part Number: 531965 (North America) 531965C (Worldwide) Recommended PTO H.P.: 25 Mowing Capacity (*Assumes no overlap or turning): 2 mph 1.25 acres per hour* 4 mph 2.5 acres per hour* 6 mph 3.75 acres per hour* Cut Height Range: 1/2" tp 4" Cutting Width: 65" Transport Width: 72" Weight: 975 lbs Std. Equipment: Heavy-duty construction, open rear discharge, easy cutting height adjustment. Heavy duty 6” dia. rollers supported by 2 - 1.25” ductile flange HEX bearings Maintenance free blade spindle assemblies for reduced maintenance. High lift blades for superior cut. Tip speed 18,287 FPM Opt. Equipment: 522361 23” Low Lift Blade (three required) 522360 23” High Lift Blade (three required)

Calling the Steiner 450 just a tractor would be like saying a bulldozer is just a shovel. There’s a difference. And it’s a big one. More versatile, more capable, the 450 can be equipped with over 30 attachments and comes with engine options up to 37 horsepower. With standard four-wheel drive and an articulating, oscillating frame for maximum ground engagement on steep, rugged terrain—then throw in exceptional ride comfort—and you’ve got more than just a small tractor. You’ve got a Steiner tractor.  Built to climb, the 450’s slope rating—up to 30 degrees—is made possible by its wide-stance chassis, oscillating frame, and standard features like four-wheel drive tractors and on-the-fly hydraulic weight transfer, controlled right from the driver’s seat for maximum weight and traction control. Whether you're using it for tractor mowing or other tough tasks, this compact tractor delivers the power and performance you need.  Benefits More Fuel Capacity A 7-gallon, durable, roto-molded fuel tank keeps you going longer without stopping to refuel.   Powerful Engine Options Choose from three reliable engines: a Kubota ® 25-horsepower liquid-cooled diesel, a Kubota ® 32-horsepower liquid-cooled gasoline, or a 37-horsepower Vanguard™ EFI gasoline engine.   Ride Comfort and Control A large operator platform with an adjustable, high-back suspension seat provides all-day ride comfort, while conveniently located controls offer smooth, predictable steering and hands-free speed control.   Hydraulic Weight Transfer & Traction Boost Integrated hydraulic weight transfer and traction boost system provide additional traction and control when needed. It also offers consistent, on-demand weight transfer that’s fully adjustable.   Quick-Hitch™ System Lets operators to conveniently switch out attachments in a matter of minutes — no tools required.   Improved Hydraulics A new stacked gear pump design dramatically increases durability and performance and with 1,750 PSI of lift pressure for more hydraulic power to handle the toughest jobs. Specifications 25 HP Engine Kubota® D902 Max Operating Speed 3600 rpm Fuel Type Diesel Horsepower (Gross) 25 hp Displacement 898 cc Cylinders 3 Cooling Liquid Fuel Capacity 7 gal Charging 40 amp Battery 630 CCA Slope Rating, Continuous 20 Max Slope Rating, Intermittent (10 mins. or less) 30° Max Weight (with Field Trac tires and fuel) 1665 lb   32 HP Engine Kubota® WG972 Max Operating Speed 3600 rpm Fuel Type Gasoline Horsepower (Gross) 32.5 hp Displacement 962 cc Cylinders 3 Cooling Liquid Fuel Capacity 7 gal Charging 40 amp Battery 450 CCA Slope Rating, Continuous 20° Max Slope Rating, Intermittent (10 mins. or less) 30° Max Weight (with Field Trac tires and fuel) 1660 lb   37 HP Engine Vanguard™ M61 Max Operating Speed 3600 rpm Fuel Type Gasoline Horsepower (Gross) 37 hp Displacement 993 cc Cylinders 2 Cooling Air Fuel Capacity 7 gal Charging 50 Amp Battery 450 CCA Slope Rating, Continuous 20° Max Slope Rating, Intermittent (10 mins. or less) 30° Max Weight (with Field Trac tires and fuel) 1575 lb

The Turfco Topdresser WideSpin™ 1550 was designed to help you achieve your agronomic goals, increase staff productivity, and free up your time. With Turfco's patented hydraulic system and spinner design, along with our Smart Controller, you can be confident you're getting the application you want every time. Reduce up to 720 passes per year and minimize turf traffic to achieve the most playable, beautiful lawn.  OVERVIEW The Turfco Topdresser Edge started with listening to what frustrates superintendents when it comes to top dressing. We heard they were tired of doing wheel-to-wheel spreads, overlapping spreads, dealing with complicated mechanical adjustments, and wasting time checking in with their crews to verify spread settings.  The WideSpin™ 1550 solves these problems and more. Calculating and knowing your rates is easier. Adjusting settings is easier. Saving preferred settings is easier. Loading is easier. Topdressing greens, approaches, and tees at the same time is easier. And getting the exact spread you want, every time, is easier.  Our unique design makes it easy to get whatever width and rate you want, without having to do mechanical adjustments. You can save your preferred applications into four programmable presets, changing widths and rates on the fly, increasing productivity, eliminating guesswork, and freeing up your time.  WideSpin 1550 topdressers are available in truck-mounted and tow behind top dresser models with engine or hydraulic power options. You can choose between Standard Electronic Control or upgrade to our patented digital Smart Controller. Standard Electronic Control models are easy to use and offer good value for the money. Smart Controller models offer rate calculation and programmable presets for greatest productivity and labor savings.  KEY FEATURES Get the exact spread you want as you move from greens to approaches to tees, at the push of a button. Know your application rates and determine how much material you need to budget — all for the first time ever with our on-board calculator. Reduce the number of passes and decrease traffic on your greens with WideSpin edge-to-edge applications. Drive topdressing down into the turf canopy by adjusting the spinner angle, minimizing the need for brushing and eliminating variations in spread due to moisture content (spreads the same wet or dry). Refill the hopper faster and with less spillage – galvanized hopper has 20% greater capacity and wide opening fits an 80" bucket. Three-year warranty. BEST SPREAD IN THE INDUSTRY For the first time ever, you can set up and save your applications one time — then get your perfect spread every time. With Turfco’s patented technologies, you can reduce greens passes, minimize turf traffic, and get a more consistent spread.  REDUCED PASSES Save time and reduce wear on your greens with Turfco's patented WideSpin™ edge-to-edge technology. Decrease the number of passes on your greens by up to 720 times per year* as compared to the wheel-to-wheel method. Improve productivity and save time; unique 30-foot wide, even spread makes it possible to cover an average-size green in just two passes. Dramatically reduce traffic on your greens, reducing the potential for soil compaction and hydraulic leaks. *18 greens, 10 times a year.  CALCULATE AND LOCK-IN PREFERRED APPLICATIONS Know your application rates, calculate the rates you want, and determine how much material you need to budget with our on-board calculator. Smart Controller lets you save your preferred applications into four programmable presets, allowing you to switch between widths and rates as you move from greens to approaches to tees at the push of a button.  ADJUSTABLE SPINNER Drive topdressing down into the turf canopy by adjusting the spinner angle, minimizing the need for brushing and eliminating variations in moisture content (spreads the same wet or dry).  LARGE HOPPER Large, galvanized steel hopper has increased capacity and is wider, making it easier to fill and less often! Refill the hopper faster and with less spillage — has 20% greater capacity and wider opening fits an 80” bucket.  SPECIFICATIONS                                Model Tow-Behind 1550 Models: Engine-powered w/Smart Control (#85828); Engine-powered w/ Standard Electronic Control (#85829); Hydraulic-powered w/Smart Control (#85824); Hydraulic-powered w/Standard Electronic Control (#85825) Warranty 3 Years Engine / Models 13 HP Briggs and Stratton (engine-powered models only) Operator Control SMART: 3-position switch; 4 programmable presets; onboard rate calculator; instantaneous belt and spinner speed control; instant throttle down control (engine powered)      STANDARD Electronic: Standard 3-position switch with manual control for spinner and belt speed Weight Tow-Behind Models: Engine-powered: 1,324 lbs (601 kg);  Hydraulic-powered: 1,021 lbs (463 kg) Truck-Mounted Models: 710 lbs w/o mounting (322 Kg) Hopper Capacity 21 ft3 (0.59 m3) struck level; 25 ft3 (0.71 m3) heaped Hopper Size 80" x 36.5" (2.03 x 0.92 m) at the top Spreading Width 12' up to 40' (2.7 up to 12 m) Spread Application 0.45 ft3 per 1,000 ft3 up to 12 ft3 per 1,000 ft3 Ground Speed Up to 8 MPH (12.8 km/h) Conveyor Belt 18" (0.46 m) wide pebble surface composition with heavy-duty polyester cord Metering Gate Manually operated with Light Spread/Heavy Spread Calibrations Drive Engine Powered: Engine powered Hydraulics / Hydraulic Powered: Tow vehicle powered hydraulics Wheels 4 Ply 26.5 x 14.00 x 12 Turf (tow-behind model)

The Turfco WideSpin™ 1550 (Truck-Mounted model) was designed to help you achieve your agronomic goals, increase staff productivity and free up your time. With Turfco's patented hydraulic system and spinner design, along with our Smart Controller, you can be confident you're getting the application you want every time. Reduce up to 720 passes per year and minimize turf traffic to achieve the most playable, beautiful golf course OVERVIEW The Turfco Edge started with listening to what frustrates superintendents when it comes to topdressing. We heard they were tired of doing wheel-to-wheel spreads, overlapping spreads, dealing with complicated mechanical adjustments, and wasting time checking in with their crews to verify spread settings. The WideSpin™ 1550 solves these problems, and more. Calculating and knowing your rates is easier. Adjusting settings is easier. Saving preferred settings is easier. Loading is easier. Topdressing greens, approaches and tees at the same time is easier. And getting the exact spread you want, every time, is easier. Our unique design makes it easy to get whatever width and rate you want, without having to do mechanical adjustments. You can save your preferred applications into four programmable presets, changing widths and rates on the fly, increasing productivity, eliminating guesswork and freeing up your time. WideSpin 1550 Topdressers truck-mounted model was designed to fit all major turf vehicles. You can choose between Standard Electronic Control or upgrade to our patented digital Smart Controller. Standard Electronic Control models are easy to use and offer good value for the money. Smart Controller models offer rate calculation and programmable presets for greatest productivity and labor savings. KEY FEATURES Truck-mounted option with patented hydraulic system and spinner design fits all major turf vehicles. Get the exact spread you want as you move from greens to approaches to tees, at the push of a button. Know your application rates, and determine how much material you need to budget — all for the first time ever with our on-board calculator. Reduce the number of passes and decrease traffic on your greens with WideSpin edge-to-edge applications. Drive topdressing down into the turf canopy by adjusting the spinner angle, minimizing the need for brushing and eliminating variations in spread due to moisture content (spreads the same wet or dry). Refill the hopper faster and with less spillage – galvanized hopper has 20% greater capacity and wide opening fits an 80" bucket. Three year warranty BEST SPREAD IN THE INDUSTRY For the first time ever, you can set up and save your applications one time — then get your perfect spread every time. With Turfco’s patented technologies, you can reduce greens passes, minimize turf traffic, and get a more consistent spread. REDUCED PASSES Save time and reduce wear on your greens with Turfco's patented WideSpin™ edge-to-edge technology. Decrease the number of passes on your greens by up to 720 times per year* as compared to the wheel-to-wheel method. Improve productivity and save time; unique 30-foot wide, even spread makes it possible to cover an average-size green in just two passes. Dramatically reduce traffic on your greens, reducing the potential for soil compaction and hydraulic leaks. *18 greens, 10 times a year. CALCULATE YOUR SPREAD Know your application rates, calculate the rates you want, and determine how much material you need to budget with our on-board calculator. Smart Controller lets you save your preferred applications into four programmable presets, allowing you to switch between widths and rates as you move from greens to approaches to tees at the push of a button. ADJUSTABLE SPINNER Drive topdressing down into the turf canopy by adjusting the spinner angle, minimizing the need for brushing and eliminating variations in moisture content (spreads the same wet or dry). LARGER HOPPER Large, galvanized steel hopper has increased capacity and is wider, making it easier to fill and less often! Refill the hopper faster and with less spillage — has 20% greater capacity and wider opening fits an 80” bucket. SPECIFICATIONS <table style="border:1px solid black;border-collapse:collapse;padding:1px "> Model Hydraulic Powered (Toro, John Deere & Jacobsen); 1550 Smart Control (#85822) or 1550 Standard Electronic Control (#85823) Operator Control Smart: 3-position switch; 4 programmable presets; onboard rate calculator; instantaneous belt and spinner speed control - Standard Electronic: Standard 3-position switch with manual control for spinner and belt speed Weight 710 lbs without mounting kit (322 Kg) - Empty Weight Hopper Capacity 21 ft3 (0.59 m3) struck level; 25 ft3 (0.71 m3) heaped Hopper Size 80" x 36.5" (2.03 x 0.92 m) at the top Spreading Width 12' up to 40' (2.7 up to 12 m) Spread Application 0.45 ft3 per 1,000 ft3 up to 12 ft3 per 1,000 ft3 using patented WideSpin Technology Ground Speed Up to 8 MPH (12.8 km/h) Conveyor Belt 18" (0.46 m) wide pebble surface composition with heavy-duty polyester cord Metering Gate Manually operated with Light Spread/Heavy Spread Calibrations Drive Truck Powered Hydraulics Warranty 3 Years