Smithco, Steiner, Simonsen, Turfco - Hustler

More Productive Three articulating rolling heads provide 70” wide rolling area. Reduce your rolling time dramatically. Easy Maintenance Direct drive to rollers eliminates time-consuming chain maintenance. Better Traction Triple hydraulic direct drive to rollers for superior traction. No time-consuming chain maintenance. Specifications ENGINE Power 16 HP Briggs Vanguard gasoline engine, two-cylinder, air-cooled, electronic ignition, full pressure lubrication system with replaceable filter. Configuration A gasoline engine powered, hydraulic drive, riding golf course greens roller. Hydraulic, triple roller drive system for superior traction and safety. Direct drive hydraulic motors to each roller cylinder eliminating the maintenance required on mechanical drive systems. Drive Hydrostatic using a 16cc hydraulic pump driving three (3) hydraulic motors direct coupled to each roller cylinder. Direct drive motors eliminate maintenance, hydraulic drive to all rollers provides superior traction in all turf and terrain conditions. Battery 12 volt   SPEED Infinitely variable 0 – 7 mph   BRAKES AND STEERING Braking Dynamic thru hydrostatic drive system Steering 10:2 Reduction; 16 soft grip steering wheel with tilt: 10 diameter turning radius; hydraulic power steering   GREENSROLLER Construction Heavy gauge square steel tubing main frame, hydraulically formed, electrically welded Rollers Two 8” diameter x 19” length and one 8 diameter x 36 seamless rollers. Controls Keyed ignition switch, engine throttle, choke at the operator’s station. Dual drive pedals control left / right operation and rolling speed. Pedals connected to hydraulic pump via fully sealed push / pull cable system. Ground Pressure 3.81 PSI with 175 lb. operator on fine turf. Seat High back, one piece for operator comfort Electrical 12 volt system, electric start to engine Sound Level 72 dbA under normal operating conditions Safety Triple drive roller system for superior traction and safe operation in all turf and terrain conditions. Dynamic braking thru hydrostat drive system. Trailer 7525 HD Transport Trailer with Clevis hitch Warranty Smithco two (2) year limited warranty Briggs & Stratton two (2) year engine manufacturer warranty   WEIGHTS AND DIMENSIONS Length 48" Width 73" Height 47" Weight 905 lbs Liquid Capacities Five (5) gallon fuel tank, Three (3) gallon hydraulic oil tank   OPTIONS Brush Kit 7513 Light Kit 750-450 Ball Hitch 750-435-1

Calling the Steiner 450 just a tractor would be like saying a bulldozer is just a shovel. There’s a difference. And it’s a big one. More versatile, more capable, the 450 can be equipped with over 30 attachments and comes with engine options up to 37 horsepower. With standard four-wheel drive and an articulating, oscillating frame for maximum ground engagement on steep, rugged terrain—then throw in exceptional ride comfort—and you’ve got more than just a small tractor. You’ve got a Steiner tractor.  Built to climb, the 450’s slope rating—up to 30 degrees—is made possible by its wide-stance chassis, oscillating frame, and standard features like four-wheel drive tractors and on-the-fly hydraulic weight transfer, controlled right from the driver’s seat for maximum weight and traction control. Whether you're using it for tractor mowing or other tough tasks, this compact tractor delivers the power and performance you need.  Benefits More Fuel Capacity A 7-gallon, durable, roto-molded fuel tank keeps you going longer without stopping to refuel.   Powerful Engine Options Choose from three reliable engines: a Kubota ® 25-horsepower liquid-cooled diesel, a Kubota ® 32-horsepower liquid-cooled gasoline, or a 37-horsepower Vanguard™ EFI gasoline engine.   Ride Comfort and Control A large operator platform with an adjustable, high-back suspension seat provides all-day ride comfort, while conveniently located controls offer smooth, predictable steering and hands-free speed control.   Hydraulic Weight Transfer & Traction Boost Integrated hydraulic weight transfer and traction boost system provide additional traction and control when needed. It also offers consistent, on-demand weight transfer that’s fully adjustable.   Quick-Hitch™ System Lets operators to conveniently switch out attachments in a matter of minutes — no tools required.   Improved Hydraulics A new stacked gear pump design dramatically increases durability and performance and with 1,750 PSI of lift pressure for more hydraulic power to handle the toughest jobs. Specifications 25 HP Engine Kubota® D902 Max Operating Speed 3600 rpm Fuel Type Diesel Horsepower (Gross) 25 hp Displacement 898 cc Cylinders 3 Cooling Liquid Fuel Capacity 7 gal Charging 40 amp Battery 630 CCA Slope Rating, Continuous 20 Max Slope Rating, Intermittent (10 mins. or less) 30° Max Weight (with Field Trac tires and fuel) 1665 lb   32 HP Engine Kubota® WG972 Max Operating Speed 3600 rpm Fuel Type Gasoline Horsepower (Gross) 32.5 hp Displacement 962 cc Cylinders 3 Cooling Liquid Fuel Capacity 7 gal Charging 40 amp Battery 450 CCA Slope Rating, Continuous 20° Max Slope Rating, Intermittent (10 mins. or less) 30° Max Weight (with Field Trac tires and fuel) 1660 lb   37 HP Engine Vanguard™ M61 Max Operating Speed 3600 rpm Fuel Type Gasoline Horsepower (Gross) 37 hp Displacement 993 cc Cylinders 2 Cooling Air Fuel Capacity 7 gal Charging 50 Amp Battery 450 CCA Slope Rating, Continuous 20° Max Slope Rating, Intermittent (10 mins. or less) 30° Max Weight (with Field Trac tires and fuel) 1575 lb

Aer-8 units are available in 60″ and 78″ widths, either pull-type or 3-point hitch mounted frame styles. The pull-type kit can be outfitted with hydraulic lines directly to the tow vehicle or with an electric/hydraulic power pack. The power pack includes a remote control to the driver’s seat and a battery-charging cable to maintain charge in the battery through repeated use. An additional benefit is water conservation. Voids in the soil capture rain or irrigation for maximum moisture utilization and run-off prevention. Hillsides and fairway mounds are lush and green again. Wet spots are opened and evaporation rates increased to bring the soil moisture back into balance and the area back into full utilization.

Benefits Eco-Friendly The Sand Star E, equipped with a lithium battery pack, offers the quietest and most eco-friendly groomer in the market. Technology The Sand Star E is features an industrial-grade motor and controller. The onboard diagnostics exceeds all industry standards. Durability Superior construction and materials combine to ensure industry-leading longevity across our product lines Reliability Family-owned since 1967, Smithco products are built to last. Great people make great products. Exclusize Features Battery The Sand Star E incorporates the Roy-PowTM 160 amp lithium battery pack, with an on-board battery management system, supported by a five-year manufacturer’s warranty. On Board Diagnostics The Sand Star E’s on-board diagnostic system lets you quickly and easily identify solutions in various subsystems - saving you time and money. Dual-Pedal Traction The Sand Star E’s exclusive dual traction pedal gives the operator the ability to smoothly transition from forward to reverse making for hands-free operation, allowing the operator the ability to focus on steering and plowing. Motor The Sand Star E is a re-engineered electric bunker rake utilizing state-of-the-art, industrial-grade motor and controller technology, while delivering superior and reliable power for even the toughest jobs. Options 45-004-A Certified ROPS w/Seat Belts 851-100 Light Kit 85-006 Sand Cultivator (Straight Blades) 85-007 Infield Scarifier (gauge wheels, vertical blades) 85-008 Sand Cultivator (with Spring Tine Teeth) 85-013 Infield Scarifier (with Spring Tine Teeth, gauge wheels) 925-110 Actuator f/Center Mount Implements Batteries Type Roy Pow 48V 160 Ah Lithium Battery Pack' 5 Year Warranty Nominal Voltage 51V Nominal Voltage 160Ah Stored Energy (Wh/kg) 8.2kWh Dimension (LxWxH) 31.5"x14.25"x8.75" Weight 159 lbs Speed Forward Speed 0-10 mph Reverse Speed 0-5 mph Motor Type Mahle Displacement 48V; Continuous AC Induction Peak Torque 83nm Current Sevcon Gen 4, Size 4, 450A 2min 540A Boost Weights and Dimensions Length 68" Width 58" Height 52" Weight 735 lbs. with batteries Wheel Base 42” Ground Clearance 5.5” – 7” under Cultivator, depending on attachment.

PERFECTLY BALANCED Smithco's drive system on 3 wheel drive models makes for superior traction and increased stability. CHOICE OF 4 MODELS in both 2 and 3 wheel drive, offering 16 or 18 hp gasoline engines and 19 hp diesel. MORE IMPLEMENTS Widest range of implements for grooming. SAND STAR I 16 hp Vanguard twin-cylinder gasoline engine, 2 wheel hydraulic parallel drive system, hydraulic operation of all rear & center mounted implements. Mechanical steering, “ Speed Boss” speed control system, “Pro Pedal” engine throttle system & remote Cyclo-Pac air intake system. Specifications SAND STAR II 18 hp Vanguard twin-cylinder gasoline engine, 2-3 wheel hydraulic parallel drive system thru selector valve, hydraulic operation of all rear & center mounted implements. Mechanical steering, “Speed Boss” speed control system, “Pro Pedal” engine throttle system & remote Cyclo-Pac air intake system. Specifications SAND STAR IV 18 hp Vanguard twin-cylinder gasoline engine, 3 wheel hydraulic series/parallel drive system, hydraulic operation of all rear & center mounted implements. Hydraulic power steering, “Speed Boss” speed control system, “Pro Pedal” engine throttle system & remote Cyclo-Pac air intake system. Specifications SAND STAR DIESEL 18 hp Kubota D722 three-cylinder, liquid-cooled diesel engine, 3 wheel hydraulic series/parallel drive system, hydraulic operation of all rear & center mounted implements. Hydraulic power steering, “Speed Boss” speed control system, “Pro Pedal” engine throttle system & remote Cyclo-Pac air intake system. Specifications

SMITHCO PULSE WIDTH MODULATION ADVANCED RATE CONTROL/NOZZLE SYSTEM WITH CHOICE OF EITHER: Automatic Field Computer Spray Control System (Star Command 1-a) Automatic Matrix GPS Guided Field Spray Controller (Star Command II-a) SPRAY STAR 2000 WITH STAR COMMAND II-A SYSTEM & 18.5 FOOT (5.5M) SPRAY BOOM (GASOLINE ENGINE POWER) Advanced precision TeeJet Matrix GPS Satellite guided Field Computer. Terra Star Antenna for use with GS, WAAS & Glonass Satellites. Provides Sub-2 in (5 cm) position control and permanently retained mapping. Smithco/TeeJet DynaJet Pulse Width Modulation. Pressure & droplet size control. Wide ground speed range. Purpose-built 18 ft (5.5 meter) Spray Boom. Dual Nozzle-Dual Solenoid Valve System. SPRAY STAR 2000 WITH STAR COMMAND I-A SYSTEM & 20 FOOT (6 M) SPRAY BOOM (GASOLINE ENGINE POWER) Advanced Rate Control Field Computer (TeeJet Radion 8140) with DynaJet Pulse Width Modulation System. Presssure and droplet size control. Wide range of ground speed. Purpose-built spray boom with dual nozzles and dual solenoid valves. SPRAY STAR 2000 WITH STAR COMMAND I SYSTEM & 18.5 FOOT (5.5M) SPRAY BOOM (GASOLINE ENGINE POWER) Same extreme application ability as Model 2007 G/D (Above) except 20 ft./6m Spray Boom. STAR COMMAND FEATURES No one matches our 9 years of experience developing the most precise application available for spraying chemicals on turf. With our Partner, TeeJet® Technologies, the Star Command System features all of TeeJet’s® previous benefits available on every Star Command sprayer, as well as these exclusive new features: TURN COMPENSATION  corrects flow to keep application rates on target through turns as tight as 20 feet. It lets you avoid straight- line applications on contoured area or rates varying as much as 50% from the inside to the outside of a boom. That doubles the application rate on the inside and cuts the outside rate in half. TEN INCH NOZZLE SPACING  to cut off-target applications in half. This spacing also allows for more efficacy because of increased overlap of the spray patterns. VIRTUAL, ON-SCREEN NOZZLE CONTROL.  TeeJet’s® new job computers operate up to 100 nozzle sections that can be controlled individually. This eliminates the need for extra cabling and job-stopping failure of mechanical switches. THE DYNAJET SYSTEM  is also incorporated into the Matrix 908 controller, eliminating extra cabling and separate controller. TERRASTAR-C PRO  significantly reduces Convergence Time, to as little as 90 seconds or less. View Specifications

The Turfco Topdresser WideSpin™ 1550 was designed to help you achieve your agronomic goals, increase staff productivity, and free up your time. With Turfco's patented hydraulic system and spinner design, along with our Smart Controller, you can be confident you're getting the application you want every time. Reduce up to 720 passes per year and minimize turf traffic to achieve the most playable, beautiful lawn.  OVERVIEW The Turfco Topdresser Edge started with listening to what frustrates superintendents when it comes to top dressing. We heard they were tired of doing wheel-to-wheel spreads, overlapping spreads, dealing with complicated mechanical adjustments, and wasting time checking in with their crews to verify spread settings.  The WideSpin™ 1550 solves these problems and more. Calculating and knowing your rates is easier. Adjusting settings is easier. Saving preferred settings is easier. Loading is easier. Topdressing greens, approaches, and tees at the same time is easier. And getting the exact spread you want, every time, is easier.  Our unique design makes it easy to get whatever width and rate you want, without having to do mechanical adjustments. You can save your preferred applications into four programmable presets, changing widths and rates on the fly, increasing productivity, eliminating guesswork, and freeing up your time.  WideSpin 1550 topdressers are available in truck-mounted and tow behind top dresser models with engine or hydraulic power options. You can choose between Standard Electronic Control or upgrade to our patented digital Smart Controller. Standard Electronic Control models are easy to use and offer good value for the money. Smart Controller models offer rate calculation and programmable presets for greatest productivity and labor savings.  KEY FEATURES Get the exact spread you want as you move from greens to approaches to tees, at the push of a button. Know your application rates and determine how much material you need to budget — all for the first time ever with our on-board calculator. Reduce the number of passes and decrease traffic on your greens with WideSpin edge-to-edge applications. Drive topdressing down into the turf canopy by adjusting the spinner angle, minimizing the need for brushing and eliminating variations in spread due to moisture content (spreads the same wet or dry). Refill the hopper faster and with less spillage – galvanized hopper has 20% greater capacity and wide opening fits an 80" bucket. Three-year warranty. BEST SPREAD IN THE INDUSTRY For the first time ever, you can set up and save your applications one time — then get your perfect spread every time. With Turfco’s patented technologies, you can reduce greens passes, minimize turf traffic, and get a more consistent spread.  REDUCED PASSES Save time and reduce wear on your greens with Turfco's patented WideSpin™ edge-to-edge technology. Decrease the number of passes on your greens by up to 720 times per year* as compared to the wheel-to-wheel method. Improve productivity and save time; unique 30-foot wide, even spread makes it possible to cover an average-size green in just two passes. Dramatically reduce traffic on your greens, reducing the potential for soil compaction and hydraulic leaks. *18 greens, 10 times a year.  CALCULATE AND LOCK-IN PREFERRED APPLICATIONS Know your application rates, calculate the rates you want, and determine how much material you need to budget with our on-board calculator. Smart Controller lets you save your preferred applications into four programmable presets, allowing you to switch between widths and rates as you move from greens to approaches to tees at the push of a button.  ADJUSTABLE SPINNER Drive topdressing down into the turf canopy by adjusting the spinner angle, minimizing the need for brushing and eliminating variations in moisture content (spreads the same wet or dry).  LARGE HOPPER Large, galvanized steel hopper has increased capacity and is wider, making it easier to fill and less often! Refill the hopper faster and with less spillage — has 20% greater capacity and wider opening fits an 80” bucket.  SPECIFICATIONS                                Model Tow-Behind 1550 Models: Engine-powered w/Smart Control (#85828); Engine-powered w/ Standard Electronic Control (#85829); Hydraulic-powered w/Smart Control (#85824); Hydraulic-powered w/Standard Electronic Control (#85825) Warranty 3 Years Engine / Models 13 HP Briggs and Stratton (engine-powered models only) Operator Control SMART: 3-position switch; 4 programmable presets; onboard rate calculator; instantaneous belt and spinner speed control; instant throttle down control (engine powered)      STANDARD Electronic: Standard 3-position switch with manual control for spinner and belt speed Weight Tow-Behind Models: Engine-powered: 1,324 lbs (601 kg);  Hydraulic-powered: 1,021 lbs (463 kg) Truck-Mounted Models: 710 lbs w/o mounting (322 Kg) Hopper Capacity 21 ft3 (0.59 m3) struck level; 25 ft3 (0.71 m3) heaped Hopper Size 80" x 36.5" (2.03 x 0.92 m) at the top Spreading Width 12' up to 40' (2.7 up to 12 m) Spread Application 0.45 ft3 per 1,000 ft3 up to 12 ft3 per 1,000 ft3 Ground Speed Up to 8 MPH (12.8 km/h) Conveyor Belt 18" (0.46 m) wide pebble surface composition with heavy-duty polyester cord Metering Gate Manually operated with Light Spread/Heavy Spread Calibrations Drive Engine Powered: Engine powered Hydraulics / Hydraulic Powered: Tow vehicle powered hydraulics Wheels 4 Ply 26.5 x 14.00 x 12 Turf (tow-behind model)

The Turfco WideSpin™ 1550 (Truck-Mounted model) was designed to help you achieve your agronomic goals, increase staff productivity and free up your time. With Turfco's patented hydraulic system and spinner design, along with our Smart Controller, you can be confident you're getting the application you want every time. Reduce up to 720 passes per year and minimize turf traffic to achieve the most playable, beautiful golf course OVERVIEW The Turfco Edge started with listening to what frustrates superintendents when it comes to topdressing. We heard they were tired of doing wheel-to-wheel spreads, overlapping spreads, dealing with complicated mechanical adjustments, and wasting time checking in with their crews to verify spread settings. The WideSpin™ 1550 solves these problems, and more. Calculating and knowing your rates is easier. Adjusting settings is easier. Saving preferred settings is easier. Loading is easier. Topdressing greens, approaches and tees at the same time is easier. And getting the exact spread you want, every time, is easier. Our unique design makes it easy to get whatever width and rate you want, without having to do mechanical adjustments. You can save your preferred applications into four programmable presets, changing widths and rates on the fly, increasing productivity, eliminating guesswork and freeing up your time. WideSpin 1550 Topdressers truck-mounted model was designed to fit all major turf vehicles. You can choose between Standard Electronic Control or upgrade to our patented digital Smart Controller. Standard Electronic Control models are easy to use and offer good value for the money. Smart Controller models offer rate calculation and programmable presets for greatest productivity and labor savings. KEY FEATURES Truck-mounted option with patented hydraulic system and spinner design fits all major turf vehicles. Get the exact spread you want as you move from greens to approaches to tees, at the push of a button. Know your application rates, and determine how much material you need to budget — all for the first time ever with our on-board calculator. Reduce the number of passes and decrease traffic on your greens with WideSpin edge-to-edge applications. Drive topdressing down into the turf canopy by adjusting the spinner angle, minimizing the need for brushing and eliminating variations in spread due to moisture content (spreads the same wet or dry). Refill the hopper faster and with less spillage – galvanized hopper has 20% greater capacity and wide opening fits an 80" bucket. Three year warranty BEST SPREAD IN THE INDUSTRY For the first time ever, you can set up and save your applications one time — then get your perfect spread every time. With Turfco’s patented technologies, you can reduce greens passes, minimize turf traffic, and get a more consistent spread. REDUCED PASSES Save time and reduce wear on your greens with Turfco's patented WideSpin™ edge-to-edge technology. Decrease the number of passes on your greens by up to 720 times per year* as compared to the wheel-to-wheel method. Improve productivity and save time; unique 30-foot wide, even spread makes it possible to cover an average-size green in just two passes. Dramatically reduce traffic on your greens, reducing the potential for soil compaction and hydraulic leaks. *18 greens, 10 times a year. CALCULATE YOUR SPREAD Know your application rates, calculate the rates you want, and determine how much material you need to budget with our on-board calculator. Smart Controller lets you save your preferred applications into four programmable presets, allowing you to switch between widths and rates as you move from greens to approaches to tees at the push of a button. ADJUSTABLE SPINNER Drive topdressing down into the turf canopy by adjusting the spinner angle, minimizing the need for brushing and eliminating variations in moisture content (spreads the same wet or dry). LARGER HOPPER Large, galvanized steel hopper has increased capacity and is wider, making it easier to fill and less often! Refill the hopper faster and with less spillage — has 20% greater capacity and wider opening fits an 80” bucket. SPECIFICATIONS <table style="border:1px solid black;border-collapse:collapse;padding:1px "> Model Hydraulic Powered (Toro, John Deere & Jacobsen); 1550 Smart Control (#85822) or 1550 Standard Electronic Control (#85823) Operator Control Smart: 3-position switch; 4 programmable presets; onboard rate calculator; instantaneous belt and spinner speed control - Standard Electronic: Standard 3-position switch with manual control for spinner and belt speed Weight 710 lbs without mounting kit (322 Kg) - Empty Weight Hopper Capacity 21 ft3 (0.59 m3) struck level; 25 ft3 (0.71 m3) heaped Hopper Size 80" x 36.5" (2.03 x 0.92 m) at the top Spreading Width 12' up to 40' (2.7 up to 12 m) Spread Application 0.45 ft3 per 1,000 ft3 up to 12 ft3 per 1,000 ft3 using patented WideSpin Technology Ground Speed Up to 8 MPH (12.8 km/h) Conveyor Belt 18" (0.46 m) wide pebble surface composition with heavy-duty polyester cord Metering Gate Manually operated with Light Spread/Heavy Spread Calibrations Drive Truck Powered Hydraulics Warranty 3 Years