Turfco, GSI InterSystems, Smithco, Steiner, Quality Steel - ABI

Specifications ENGINE Power 16 HP Briggs Vanguard gasoline engine, two cylinder, air-cooled, electronic ignition, full pressure lubrication system with replaceable filter, cast iron cylinder sleeves, engine mounted air filter. Configuration A gasoline engine powered, hydraulic drive, riding golf course greens roller. Hydraulic dual roller drive system for superior traction and safety. Drive Direct drive hydraulic motors eliminate the maintenance required on mechanical drive systems.   SPEED Infinitely variable 0 – 9 mph   BRAKES AND STEERING Braking Dynamic thru hydrostatic drive system Steering Hydraulic power steering   GREENSROLLER Construction Heavy gauge square steel tubing main frame, hydraulically formed, electrically welded Rollers Two (2) oscillating 8” diameter x 36" length, seamless, drawn over mandrel steel tubes. Beveled on both ends with roller scrapers. Bolted hubs with bearings on each end of both rollers. Controls Keyed ignition switch, engine throttle, choke at the operator’s station. Dual drive pedals control left / right operation and rolling speed. Pedals connected to hydraulic pump via fully sealed push / pull cable system Ground Pressure 3.86 PSI Seat High back, one piece for operator comfort Electrical System 12 volt system, electric start to engine Sound Level 72 dbA under normal operating conditions Battery 12 volt Safety Dual drive roller system for superior traction and safe operation in all turf and terrain conditions. Dynamic braking thru hydrostatic drive system. Transport Trailer Low profile design with drop axle rated at 2500 lb. capacity. Extra wide expended metal bed and tailgate fitted with rubber matting for traction and an adjustable centering guide system for easy “ load / unload “ of the roller.Width – 56”, Length – 47” tailgate “up”, not including drawbar, Weight – 240 lbs., Drawbar – adjustable from 44” to 47”, Tires – 18-9.50×8 pneumatic Warranty Smithco two (2) year limited warranty Briggs & Stratton two (2) year engine manufacturer warranty   WEIGHTS AND DIMENSIONS Length 44" Width 45" Height 49" Weight 845 lbs Liquid Capacities Five (5) gallon, three (3) gallon hydraulic oil tank   OPTIONS Light Kit 750-450 Greens Spiker Attachment Model 7512

ENGINE Engine 9 HP Honda Model#: GX270UT2QA2 Commercial gasoline engine, single-cylinder, air-cooled. Engine mounted air cleaner. Drive Direct drive hydraulic motors eliminate the maintenance required on mechanical drive systems.   SPEED Infinitely variable 0 – 9 mph   BRAKES AND STEERING Braking Dynamic thru hydrostatic drive system Steering Mechanical chain/sprocket, 16" automotive type steering wheel   GREENSROLLER Construction Heavy gauge square steel tubing mainframe, hydraulically formed, electrically welded. Rollers Two (2) oscillating 8” x 36” length, seamless, drawn over mandrel steel tubes. Bolted hubs with bearings on each end of the rollers. Controls Electric start, engine throttle, choke and fuel on/off on the engine. Dual drive pedals control left / right operation and rolling speed. Pedals connected to hydraulic pump via mechanical linkage. Ground Pressure 3.35 PSI Seat High back, one piece for operator comfort Electrical System 12-volt system available from the engine while running, no battery Sound Level 90 dbA under normal operating conditions Fuel Tank 1-gallon engine mounted Oil Tank 1-gallon hydraulic oil tank Warranty Smithco two (2) year limited warranty Briggs & Stratton two (2) year engine manufacturer warranty   WEIGHTS AND DIMENSIONS Length 52" Width 49" Height 47" Weight 625 lbs   OPTIONS Light Kit 750-555 Brush Kit 7514

More Productive Three articulating rolling heads provide 70” wide rolling area. Reduce your rolling time dramatically. Easy Maintenance Direct drive to rollers eliminates time-consuming chain maintenance. Better Traction Triple hydraulic direct drive to rollers for superior traction. No time-consuming chain maintenance. Specifications ENGINE Power 16 HP Briggs Vanguard gasoline engine, two-cylinder, air-cooled, electronic ignition, full pressure lubrication system with replaceable filter. Configuration A gasoline engine powered, hydraulic drive, riding golf course greens roller. Hydraulic, triple roller drive system for superior traction and safety. Direct drive hydraulic motors to each roller cylinder eliminating the maintenance required on mechanical drive systems. Drive Hydrostatic using a 16cc hydraulic pump driving three (3) hydraulic motors direct coupled to each roller cylinder. Direct drive motors eliminate maintenance, hydraulic drive to all rollers provides superior traction in all turf and terrain conditions. Battery 12 volt   SPEED Infinitely variable 0 – 7 mph   BRAKES AND STEERING Braking Dynamic thru hydrostatic drive system Steering 10:2 Reduction; 16 soft grip steering wheel with tilt: 10 diameter turning radius; hydraulic power steering   GREENSROLLER Construction Heavy gauge square steel tubing main frame, hydraulically formed, electrically welded Rollers Two 8” diameter x 19” length and one 8 diameter x 36 seamless rollers. Controls Keyed ignition switch, engine throttle, choke at the operator’s station. Dual drive pedals control left / right operation and rolling speed. Pedals connected to hydraulic pump via fully sealed push / pull cable system. Ground Pressure 3.81 PSI with 175 lb. operator on fine turf. Seat High back, one piece for operator comfort Electrical 12 volt system, electric start to engine Sound Level 72 dbA under normal operating conditions Safety Triple drive roller system for superior traction and safe operation in all turf and terrain conditions. Dynamic braking thru hydrostat drive system. Trailer 7525 HD Transport Trailer with Clevis hitch Warranty Smithco two (2) year limited warranty Briggs & Stratton two (2) year engine manufacturer warranty   WEIGHTS AND DIMENSIONS Length 48" Width 73" Height 47" Weight 905 lbs Liquid Capacities Five (5) gallon fuel tank, Three (3) gallon hydraulic oil tank   OPTIONS Brush Kit 7513 Light Kit 750-450 Ball Hitch 750-435-1

Overview Force's Z-23 is engineered to empower ballfields groundskeepers, turf managers, and landscape contractors to get work done with maximized efficiency. Our patented design enables a smaller footprint, zero-turn platform to do the work of much larger and heavier equipment. So you get more with less, with a machine that’s easier to transport and to operate, making it perfect for a one man job or to speed up your bigger jobs. You can easily swap out additional attachments on the job, with no tools required. The Force is a commercial-grade machine that can do it all with blazing fast zero-turn efficiency and hand-work level precision. Industry Leading Technologies Responsive Variable Force Technology (RVF) Located at the mid underbelly of the ABI Force, the patented RVF Technology hydraulically controls mid-mounted ground-engaging attachments with lift, variable down pressure, and pitch adjustments.   Zero-Turn Functionality Located at the mid underbelly of the ABI Force, the patented RVF Technology hydraulically controls mid-mounted ground-engaging attachments with lift, variable down pressure, and pitch adjustments.   Laser Grading Package Available The ABI Force Z23SL is fully laser compatible and can be configured with a complete laser system. Laser graded infields perfectly shed rain, allowing for more games and quicker return times than ever before. ABI’s laser system works in tandem with the mini box blade and VibraFlex options to transform the ABI Force into a proven compact zero turn laser grading machine.   Speed Lock + Depth Lock Located at the mid underbelly of the ABI Force, the patented RVF Technology hydraulically controls mid-mounted ground-engaging attachments with lift, variable down pressure, and pitch adjustments.   Total Control Located at the mid underbelly of the ABI Force, the patented RVF Technology hydraulically controls mid-mounted ground-engaging attachments with lift, variable down pressure, and pitch adjustments.   Heavy-Duty 2-Stage Air Filter Every ABI Force Z-23 comes standard with a Heavy Duty 2-Stage Cyclonic Canister Air Filtration System. A 2-stage filtration system makes sure that your engine pulls clean air, acting as your engine’s shield in dusty conditions. Keep the filter clean to see improved engine performance, fuel efficiency, and extended engine life. See full list of attachments on ABI's website . Specifications Engine Power Kohler® Command Pro 23 hp EFI V-Twin OHV (17.2kW) | 747cc | 4-Cycle Air Cooled | Gasoline | Model ECH740 Air Filter Heavy Duty 2-Stage Cyclonic canister air filtration system Fuel 6 gallon/22.7125 liter capacity with fuel gauge | Unleaded gasoline Electrical 20 amp Regulated alternator | 350 CCA at 0 degrees - battery Drive System Drive Hydrostatic zero-turn | HydroGear variable displacement pumps & fixed displacement wheel motors Speed Forward 0-10 mph; Reverse 0-4 mph Braking Dynamic braking via hydrostatic transmission | Integrated parking brake Chassis Tires & Wheels Front (Air): 13 x 6.50-6, Rear: 24 x 12.00-12 (Air or Optional Tweel) Frame Construction Rugged tube steel Mid-Mount System Independent hydraulic lift & pitch controls with adjustable & lockable spring-loaded down force with Responsive Variable Force (RVF) technology. Rear-Mount System Hydraulic lift control with articulation Towing Capacity 1-1/4" receiver - 2,000 lbs. towing capacity at slow speed on flat and open ground only! Never tow anything on an incline! Operator Experience Operator Experience Cushioned knee pad & spring cushioned standing platform | Cushioned zero-turn steering levers | Dash indicator lights | USB power port | Cup holder | Machine mount assistance bar Environmental Environmental EPA & CARB compliant Weight Base Unit Weight 1,300 lbs. Dimensions Dimensions 93" L x 56" W x 57"H | 72"-84" With optional rear attachments Warranty Limited Warranty 36-month machine and accessories/36-month unlimited hour commercial warranty (refer to manual)

Calling the Steiner 450 just a tractor would be like saying a bulldozer is just a shovel. There’s a difference. And it’s a big one. More versatile, more capable, the 450 can be equipped with over 30 attachments and comes with engine options up to 37 horsepower. With standard four-wheel drive and an articulating, oscillating frame for maximum ground engagement on steep, rugged terrain—then throw in exceptional ride comfort—and you’ve got more than just a small tractor. You’ve got a Steiner tractor.  Built to climb, the 450’s slope rating—up to 30 degrees—is made possible by its wide-stance chassis, oscillating frame, and standard features like four-wheel drive tractors and on-the-fly hydraulic weight transfer, controlled right from the driver’s seat for maximum weight and traction control. Whether you're using it for tractor mowing or other tough tasks, this compact tractor delivers the power and performance you need.  Benefits More Fuel Capacity A 7-gallon, durable, roto-molded fuel tank keeps you going longer without stopping to refuel.   Powerful Engine Options Choose from three reliable engines: a Kubota ® 25-horsepower liquid-cooled diesel, a Kubota ® 32-horsepower liquid-cooled gasoline, or a 37-horsepower Vanguard™ EFI gasoline engine.   Ride Comfort and Control A large operator platform with an adjustable, high-back suspension seat provides all-day ride comfort, while conveniently located controls offer smooth, predictable steering and hands-free speed control.   Hydraulic Weight Transfer & Traction Boost Integrated hydraulic weight transfer and traction boost system provide additional traction and control when needed. It also offers consistent, on-demand weight transfer that’s fully adjustable.   Quick-Hitch™ System Lets operators to conveniently switch out attachments in a matter of minutes — no tools required.   Improved Hydraulics A new stacked gear pump design dramatically increases durability and performance and with 1,750 PSI of lift pressure for more hydraulic power to handle the toughest jobs. Specifications 25 HP Engine Kubota® D902 Max Operating Speed 3600 rpm Fuel Type Diesel Horsepower (Gross) 25 hp Displacement 898 cc Cylinders 3 Cooling Liquid Fuel Capacity 7 gal Charging 40 amp Battery 630 CCA Slope Rating, Continuous 20 Max Slope Rating, Intermittent (10 mins. or less) 30° Max Weight (with Field Trac tires and fuel) 1665 lb   32 HP Engine Kubota® WG972 Max Operating Speed 3600 rpm Fuel Type Gasoline Horsepower (Gross) 32.5 hp Displacement 962 cc Cylinders 3 Cooling Liquid Fuel Capacity 7 gal Charging 40 amp Battery 450 CCA Slope Rating, Continuous 20° Max Slope Rating, Intermittent (10 mins. or less) 30° Max Weight (with Field Trac tires and fuel) 1660 lb   37 HP Engine Vanguard™ M61 Max Operating Speed 3600 rpm Fuel Type Gasoline Horsepower (Gross) 37 hp Displacement 993 cc Cylinders 2 Cooling Air Fuel Capacity 7 gal Charging 50 Amp Battery 450 CCA Slope Rating, Continuous 20° Max Slope Rating, Intermittent (10 mins. or less) 30° Max Weight (with Field Trac tires and fuel) 1575 lb

The Turfco Topdresser WideSpin™ 1550 was designed to help you achieve your agronomic goals, increase staff productivity, and free up your time. With Turfco's patented hydraulic system and spinner design, along with our Smart Controller, you can be confident you're getting the application you want every time. Reduce up to 720 passes per year and minimize turf traffic to achieve the most playable, beautiful lawn.  OVERVIEW The Turfco Topdresser Edge started with listening to what frustrates superintendents when it comes to top dressing. We heard they were tired of doing wheel-to-wheel spreads, overlapping spreads, dealing with complicated mechanical adjustments, and wasting time checking in with their crews to verify spread settings.  The WideSpin™ 1550 solves these problems and more. Calculating and knowing your rates is easier. Adjusting settings is easier. Saving preferred settings is easier. Loading is easier. Topdressing greens, approaches, and tees at the same time is easier. And getting the exact spread you want, every time, is easier.  Our unique design makes it easy to get whatever width and rate you want, without having to do mechanical adjustments. You can save your preferred applications into four programmable presets, changing widths and rates on the fly, increasing productivity, eliminating guesswork, and freeing up your time.  WideSpin 1550 topdressers are available in truck-mounted and tow behind top dresser models with engine or hydraulic power options. You can choose between Standard Electronic Control or upgrade to our patented digital Smart Controller. Standard Electronic Control models are easy to use and offer good value for the money. Smart Controller models offer rate calculation and programmable presets for greatest productivity and labor savings.  KEY FEATURES Get the exact spread you want as you move from greens to approaches to tees, at the push of a button. Know your application rates and determine how much material you need to budget — all for the first time ever with our on-board calculator. Reduce the number of passes and decrease traffic on your greens with WideSpin edge-to-edge applications. Drive topdressing down into the turf canopy by adjusting the spinner angle, minimizing the need for brushing and eliminating variations in spread due to moisture content (spreads the same wet or dry). Refill the hopper faster and with less spillage – galvanized hopper has 20% greater capacity and wide opening fits an 80" bucket. Three-year warranty. BEST SPREAD IN THE INDUSTRY For the first time ever, you can set up and save your applications one time — then get your perfect spread every time. With Turfco’s patented technologies, you can reduce greens passes, minimize turf traffic, and get a more consistent spread.  REDUCED PASSES Save time and reduce wear on your greens with Turfco's patented WideSpin™ edge-to-edge technology. Decrease the number of passes on your greens by up to 720 times per year* as compared to the wheel-to-wheel method. Improve productivity and save time; unique 30-foot wide, even spread makes it possible to cover an average-size green in just two passes. Dramatically reduce traffic on your greens, reducing the potential for soil compaction and hydraulic leaks. *18 greens, 10 times a year.  CALCULATE AND LOCK-IN PREFERRED APPLICATIONS Know your application rates, calculate the rates you want, and determine how much material you need to budget with our on-board calculator. Smart Controller lets you save your preferred applications into four programmable presets, allowing you to switch between widths and rates as you move from greens to approaches to tees at the push of a button.  ADJUSTABLE SPINNER Drive topdressing down into the turf canopy by adjusting the spinner angle, minimizing the need for brushing and eliminating variations in moisture content (spreads the same wet or dry).  LARGE HOPPER Large, galvanized steel hopper has increased capacity and is wider, making it easier to fill and less often! Refill the hopper faster and with less spillage — has 20% greater capacity and wider opening fits an 80” bucket.  SPECIFICATIONS                                Model Tow-Behind 1550 Models: Engine-powered w/Smart Control (#85828); Engine-powered w/ Standard Electronic Control (#85829); Hydraulic-powered w/Smart Control (#85824); Hydraulic-powered w/Standard Electronic Control (#85825) Warranty 3 Years Engine / Models 13 HP Briggs and Stratton (engine-powered models only) Operator Control SMART: 3-position switch; 4 programmable presets; onboard rate calculator; instantaneous belt and spinner speed control; instant throttle down control (engine powered)      STANDARD Electronic: Standard 3-position switch with manual control for spinner and belt speed Weight Tow-Behind Models: Engine-powered: 1,324 lbs (601 kg);  Hydraulic-powered: 1,021 lbs (463 kg) Truck-Mounted Models: 710 lbs w/o mounting (322 Kg) Hopper Capacity 21 ft3 (0.59 m3) struck level; 25 ft3 (0.71 m3) heaped Hopper Size 80" x 36.5" (2.03 x 0.92 m) at the top Spreading Width 12' up to 40' (2.7 up to 12 m) Spread Application 0.45 ft3 per 1,000 ft3 up to 12 ft3 per 1,000 ft3 Ground Speed Up to 8 MPH (12.8 km/h) Conveyor Belt 18" (0.46 m) wide pebble surface composition with heavy-duty polyester cord Metering Gate Manually operated with Light Spread/Heavy Spread Calibrations Drive Engine Powered: Engine powered Hydraulics / Hydraulic Powered: Tow vehicle powered hydraulics Wheels 4 Ply 26.5 x 14.00 x 12 Turf (tow-behind model)

The Turfco WideSpin™ 1550 (Truck-Mounted model) was designed to help you achieve your agronomic goals, increase staff productivity and free up your time. With Turfco's patented hydraulic system and spinner design, along with our Smart Controller, you can be confident you're getting the application you want every time. Reduce up to 720 passes per year and minimize turf traffic to achieve the most playable, beautiful golf course OVERVIEW The Turfco Edge started with listening to what frustrates superintendents when it comes to topdressing. We heard they were tired of doing wheel-to-wheel spreads, overlapping spreads, dealing with complicated mechanical adjustments, and wasting time checking in with their crews to verify spread settings. The WideSpin™ 1550 solves these problems, and more. Calculating and knowing your rates is easier. Adjusting settings is easier. Saving preferred settings is easier. Loading is easier. Topdressing greens, approaches and tees at the same time is easier. And getting the exact spread you want, every time, is easier. Our unique design makes it easy to get whatever width and rate you want, without having to do mechanical adjustments. You can save your preferred applications into four programmable presets, changing widths and rates on the fly, increasing productivity, eliminating guesswork and freeing up your time. WideSpin 1550 Topdressers truck-mounted model was designed to fit all major turf vehicles. You can choose between Standard Electronic Control or upgrade to our patented digital Smart Controller. Standard Electronic Control models are easy to use and offer good value for the money. Smart Controller models offer rate calculation and programmable presets for greatest productivity and labor savings. KEY FEATURES Truck-mounted option with patented hydraulic system and spinner design fits all major turf vehicles. Get the exact spread you want as you move from greens to approaches to tees, at the push of a button. Know your application rates, and determine how much material you need to budget — all for the first time ever with our on-board calculator. Reduce the number of passes and decrease traffic on your greens with WideSpin edge-to-edge applications. Drive topdressing down into the turf canopy by adjusting the spinner angle, minimizing the need for brushing and eliminating variations in spread due to moisture content (spreads the same wet or dry). Refill the hopper faster and with less spillage – galvanized hopper has 20% greater capacity and wide opening fits an 80" bucket. Three year warranty BEST SPREAD IN THE INDUSTRY For the first time ever, you can set up and save your applications one time — then get your perfect spread every time. With Turfco’s patented technologies, you can reduce greens passes, minimize turf traffic, and get a more consistent spread. REDUCED PASSES Save time and reduce wear on your greens with Turfco's patented WideSpin™ edge-to-edge technology. Decrease the number of passes on your greens by up to 720 times per year* as compared to the wheel-to-wheel method. Improve productivity and save time; unique 30-foot wide, even spread makes it possible to cover an average-size green in just two passes. Dramatically reduce traffic on your greens, reducing the potential for soil compaction and hydraulic leaks. *18 greens, 10 times a year. CALCULATE YOUR SPREAD Know your application rates, calculate the rates you want, and determine how much material you need to budget with our on-board calculator. Smart Controller lets you save your preferred applications into four programmable presets, allowing you to switch between widths and rates as you move from greens to approaches to tees at the push of a button. ADJUSTABLE SPINNER Drive topdressing down into the turf canopy by adjusting the spinner angle, minimizing the need for brushing and eliminating variations in moisture content (spreads the same wet or dry). LARGER HOPPER Large, galvanized steel hopper has increased capacity and is wider, making it easier to fill and less often! Refill the hopper faster and with less spillage — has 20% greater capacity and wider opening fits an 80” bucket. SPECIFICATIONS <table style="border:1px solid black;border-collapse:collapse;padding:1px "> Model Hydraulic Powered (Toro, John Deere & Jacobsen); 1550 Smart Control (#85822) or 1550 Standard Electronic Control (#85823) Operator Control Smart: 3-position switch; 4 programmable presets; onboard rate calculator; instantaneous belt and spinner speed control - Standard Electronic: Standard 3-position switch with manual control for spinner and belt speed Weight 710 lbs without mounting kit (322 Kg) - Empty Weight Hopper Capacity 21 ft3 (0.59 m3) struck level; 25 ft3 (0.71 m3) heaped Hopper Size 80" x 36.5" (2.03 x 0.92 m) at the top Spreading Width 12' up to 40' (2.7 up to 12 m) Spread Application 0.45 ft3 per 1,000 ft3 up to 12 ft3 per 1,000 ft3 using patented WideSpin Technology Ground Speed Up to 8 MPH (12.8 km/h) Conveyor Belt 18" (0.46 m) wide pebble surface composition with heavy-duty polyester cord Metering Gate Manually operated with Light Spread/Heavy Spread Calibrations Drive Truck Powered Hydraulics Warranty 3 Years

Mete-R-Matic®, the best-known brand in topdressing, sets the standard for uniform application. The Mete-R-Matic IV is the ideal choice for golf greens, tees, driving ranges, and sports fields. The patented Chevron® belt guarantees a uniform application of all types of materials regardless of moisture content, including top dresser sand and soil top dresser applications. The patented ground drive system means that you're always getting a consistent rate, regardless of how fast or slow the operator drives. No hydraulics, no pumps, no engines. Just set your application rate and go with this top dresser machine. OVERVIEW  The Mete-R-Matic® IV, featuring a patented Chevron® belt, is the first and only top dressing spreader to ensure uniform application of all types of materials and varying levels of moisture content, including wet sand. Perfect for after aerification, it consistently applies a wide variety of top dressing lawn mixtures such as sand, organic compost, peat humus, and rye grass, as well as crumb rubbers, gypsum, lime, and calcine clays.  Ideal for golf greens, cultured grasses, and other areas sensitive to weight, this Turfco topdresser utilizes an eco-friendly, patented ground-drive system. When you speed up, slow down, or cross uneven terrain, the conveyor belt and brush automatically adjust at the same rate to provide a consistent and even application every time. No hydraulics, no pumps, and no engines. Just hook up and go.  A wide, galvanized hopper won't rust or flake and is easily loaded with the Turfco CR-15 or other front-end loaders. Easily towed by turf truck vehicles, the Mete-R-Matic IV is designed to handle any topdressing program.  KEY FEATURES Patented ground drive system means you're always getting a consistent rate, regardless of how fast or slow the operator drives. Eco-friendly ground drive — no hydraulics, pumps, or engines. Patented Chevron is the first and only belt to ensure uniform application of all types of materials with varying levels of moisture, including wet sand, organic compost, peat humus, and rye grass, as well as crumb rubbers, gypsum, lime, and calcine clays. All six wheels drive the machine for consistent application on uneven terrain. Wide hopper design is easily loaded with a front-end loader or the Turfco® CR-15. Easily towed by turf truck vehicles. Proven, battle-tested design has been the standard of the industry since 1981. Galvanized hopper (no rusting — or potential rust flakes in topdressing material). CONSISTENTLY APPLY WET OR DRY Turfco Mete-R-Matic topdressers, featuring a patented Chevron belt, are the first and only to ensure uniform application of all types of materials and varying levels of moisture content, including wet sand. You can consistently apply a wide variety of topdressing mixtures such as sand, organic and inorganic compost, peat and humus, rye grass, as well as crumb rubbers, gypsum, lime, and calcine clays. ECO-FRIENDLY GROUND DRIVE The Mete-R-Matic IV utilizes a patented ground-drive system. When you speed up, slow down, or cross uneven terrain, the conveyor belt and brush automatically adjust at the same rate to provide a consistent and even application every single time. No hydraulics, no pumps, and no engines. Just hook up and go with the Turfco topdresser. TACKLE ANY TOPDRESSING JOB Our one-cubic-yard hopper with a unique half-moon metering gate makes quick work of any topdressing task. Set your rate and know that your operator will get that rate all day long. Easily towed by turf truck vehicles. Simple and intuitive design, combined with a three-year warranty, guarantees you and your staff can complete your applications with confidence. Whether you need to apply top dressing lawn treatments or other materials, the top dresser machine provides efficient, reliable results every time. SPECIFICATIONS Model 85424 Drive Wheels are driven by the ground; all six tires mechanically drive the conveyor and brush; no engine; no hydraulic system Hopper Capacity 1 yd3 (0.76 m3) Hopper Size Top: 73 ½" x 39 3/8" (1.87 m x 1.00 m), Bottom: 60" x 20" (1.5 m x 0.51 m), Depth: 19" (0.48 m) Spreading Width 60" (1.5 m) Topdressing Speed Up to 8 MPH (12.8 km/h) Transport Speed Empty: up to 15 MPH (24 km/h), Loaded: up to 8 MPH (12.8 km/h) Application From very fine to ¼" (6.5 mm) Conveyor Belt Wide rubber composition with patented, Chevron belt 60" (1.5 m) Metering Gate Taintor gate design is easily adjusted and provides a uniform opening up to 2 ¼" (57 mm) Brush 9" (228 mm) diameter, polypropylene bristle Controls Electric clutch actuator to engage conveyor and brush. Metering gate control for depth of application. Clutch The main clutch is a mechanical ratchet design actuated electrically from the operator’s position on the tow vehicle. Wheels & Tires Six, 16" x 6.50" x 8" rib tread turf tires Hitch Heavy-duty pin hitch Empty Weight 882 lb (400 kg) Warranty 3 Years

Mete-R-Matic®, the best-known brand in topdressing, sets the standard for uniform application. The Mete-R-Matic XL with a 2.25 cubic yard hopper is the ideal choice for large turf areas, requiring less reloading and transportation for increased efficiency and productivity. The patented Chevron belt guarantees a uniform application of all types of materials regardless of moisture content. The patented ground drive system means that you're always getting a consistent rate regardless of how fast or slow the operator drives. No hydraulics, no pumps, no engines. Just set your application rate and go. OVERVIEW The Mete-R-Matic® XL is ideal for large turf areas with 2.25 cubic yards, less reloading and transportation.  Featuring a patented Chevron® belt, the Mete-R-Matic series was the first to ensure uniform application of all types of materials and varying levels of moisture content, including wet sand. Perfect for after aerification. You can consistently apply a wide variety of topdressing mixtures such as sand, organic compost, peat humus, and rye grass, as well as crumb rubbers, gypsum, lime and calcine clays. This topdresser utilizes an eco-friendly, patented ground-drive system. When you speed up, slow down or cross uneven terrain, the conveyor belt and brush automatically adjust at the same rate to provide a consistent and even application every time. No hydraulics, no pumps and no engines. Just hook up and go. The large, galvanized hopper won't rust or flake and is easily loaded with the Turfco CR-15 or other front-end loader. The Mete-R-Matic XL is designed to handle any topdressing program. KEY FEATURES 2.25 Cubic yard hopper requiring less transportation and reloading  Patented ground drive system means that you're always getting a consistent rate regardless of how fast or slow the operator drives. Eco-friendly ground drive - no hydraulics, pumps or engine. Patented Chevron belt is the first and only to ensure uniform application of all types of materials with varying levels of moisture, including wet sand. Wide hopper design is easily loaded with front-end loader or the Turfco® CR-15. Proven, battle-tested design has been the standard of the industry since 1981. Galvanized hopper (no rusting—or potential rust flakes in topdress material). 3-Year warranty. CONSISTENTLY APPLY WET OR DRY Turfco Mete-R-Matic topdressers, featuring a patented Chevron ®  belt, are the first and only to ensure uniform application of all types of materials and varying levels of moisture content, including wet sand. You can consistently apply a wide variety of topdressing mixtures such as sand, organic and inorganic compost, peat and humus, rye grass, as well as crumb rubbers, gypsum, lime and calcine clays. ECO-FRIENDLY GROUND DRIVE The Mete-R-Matic XL utilizes a patented ground-drive system. When you speed up, slow down or cross uneven terrain, the conveyor belt and brush automatically adjust at the same rate to provide a consistent and event application every single time. No hydraulics, no pumps and no engines. Just hook up and go. TACKLE ANY TOPDRESSING JOB At 2.25 cubic yards, the Mete-R-Matic XL is ideal for large turf areas, requiring less reloading and increasing transportation efficiency. The larger capacity hopper can easily be filled with a Turfco CR-15  or other front-end loader. Made of galvanized steel, the self-cleaning hopper won't rust or flake. SPECIFICATIONS <table style="border:1px solid black;border-collapse:collapse;padding:1px "> Model 85460 Drive Wheels are driven by the ground; all tires mechanically drive the conveyor and brush; no engine; no hydraulic system Hopper Capacity 60.75 ft3 (1.72 m3; 2.25 yd3), galvanized panels Hopper Size Top: 79" x 65" (2.0 m x 1.7 m), Bottom: 60" x 46" (1.5 m x 1.17 m), Depth: 19" (0.48 m) Payload 6,000 lb (2,721 kg) Spreading Width 60" (1.5 m) Topdressing Speed Up to 8 MPH (12.8 km/h) Transport Speed Up to 8 MPH (12.8 km/h) Conveyor Belt Wide rubber composition with patented Chevron belt 60" (1.5 m) Metering Gate Taintor gate design is easily adjusted and provides a uniform opening up to 2 ¼" (57 mm) Brush 9" (228 mm) diameter, polypropylene bristle Controls Electrically operated clutch for conveyor and brush drive. Metering gate adjusted by hand. Clutch The main clutch is a mechanical ratchet design actuated electrically from the operator’s position on the tow vehicle Wheels & Tires Two, 33" x 15.50" – 16.5" flotation tires Hitch Adjustable height clevis 1" pin hitch Tractor Requirements Minimum of 30 HP (22.4 kW) Empty Weight 2,110 lb (957 kg) Electrical Requirements 12 volt DC, negative ground (electrical power provided by tow vehicle)