close
Categories
Filter By
Brand
- ABI1
- B&B Technologies2
- B&B Trailers7
- Capillary Flow1
- Case IH6
- Continental524
- Dalton Ag7
- Doyle Mfg.47
- GSI InterSystems4
- Hustler1
- Jacobsen27
- Lely7
- Peterson's Dust Solutions2
- Precision Tank8
- Progressive Turf Equipment4
- Quality Steel1
- Rain Bird200
- Redexim3
- Simonsen7
- Smithco16
- Squibb Taylor3053
- Steiner1
- Traqnology1
- TriArc1
- Turfco12
- Wessex3
- Yanmar6
Price
Condition
Product Type
Wessex, Simonsen, Smithco, Steiner, ABI - Traqnology
29 items
Spray Star 2000
Spray Star 2000
SMITHCO PULSE WIDTH MODULATION ADVANCED RATE CONTROL/NOZZLE SYSTEM WITH CHOICE OF EITHER: Automatic Field Computer Spray Control System (Star Command 1-a) Automatic Matrix GPS Guided Field Spray Controller (Star Command II-a) SPRAY STAR 2000 WITH STAR COMMAND II-A SYSTEM & 18.5 FOOT (5.5M) SPRAY BOOM (GASOLINE ENGINE POWER) Advanced precision TeeJet Matrix GPS Satellite guided Field Computer. Terra Star Antenna for use with GS, WAAS & Glonass Satellites. Provides Sub-2 in (5 cm) position control and permanently retained mapping. Smithco/TeeJet DynaJet Pulse Width Modulation. Pressure & droplet size control. Wide ground speed range. Purpose-built 18 ft (5.5 meter) Spray Boom. Dual Nozzle-Dual Solenoid Valve System. SPRAY STAR 2000 WITH STAR COMMAND I-A SYSTEM & 20 FOOT (6 M) SPRAY BOOM (GASOLINE ENGINE POWER) Advanced Rate Control Field Computer (TeeJet Radion 8140) with DynaJet Pulse Width Modulation System. Presssure and droplet size control. Wide range of ground speed. Purpose-built spray boom with dual nozzles and dual solenoid valves. SPRAY STAR 2000 WITH STAR COMMAND I SYSTEM & 18.5 FOOT (5.5M) SPRAY BOOM (GASOLINE ENGINE POWER) Same extreme application ability as Model 2007 G/D (Above) except 20 ft./6m Spray Boom. STAR COMMAND FEATURES No one matches our 9 years of experience developing the most precise application available for spraying chemicals on turf. With our Partner, TeeJet® Technologies, the Star Command System features all of TeeJet’s® previous benefits available on every Star Command sprayer, as well as these exclusive new features: TURN COMPENSATION corrects flow to keep application rates on target through turns as tight as 20 feet. It lets you avoid straight- line applications on contoured area or rates varying as much as 50% from the inside to the outside of a boom. That doubles the application rate on the inside and cuts the outside rate in half. TEN INCH NOZZLE SPACING to cut off-target applications in half. This spacing also allows for more efficacy because of increased overlap of the spray patterns. VIRTUAL, ON-SCREEN NOZZLE CONTROL. TeeJet’s® new job computers operate up to 100 nozzle sections that can be controlled individually. This eliminates the need for extra cabling and job-stopping failure of mechanical switches. THE DYNAJET SYSTEM is also incorporated into the Matrix 908 controller, eliminating extra cabling and separate controller. TERRASTAR-C PRO significantly reduces Convergence Time, to as little as 90 seconds or less. View Specifications
- USD
Sweep Star 48
Sweep Star 48
48" Wide Riding Sweeper Self-propelled, 3-wheel design Extremely Maneuverable 3-wheel design makes sweeping easy around trees, fences, buildings or any other obstacle. More Power 18 hp (13 kW) twin-cylinder gasoline engine Easy to Use High-lift 1.75 cubic yard dump raises to 65” for easy disposal of trash Specifications Models 48-500AB Sweep Star 48H Brush Reel 48-500AF Sweep Star 48H Finger Reel Power 18 hp twin-cylinder, OHV, air-cooled gasoline engine with double action air intake filtration. (Engine mounted plus remote cyclonic filtration system). Configuration Self contained, three-wheel, tri-cycle configuration with front steering, two rear drive wheels and rear mounted high lift debris hopper. Debris Hopper Capacity – 1.75 cubic yards | Construction – 14 gauge steel formed panels High capacity airflow openings at top and rear | Dump - Hydraulic raise / lower debris hopper to dump height to 6’4″ above the ground to dump debris into refuse container. Sweeper Head 48″ wide; belt-driven single rotating reel; adjustable sweeping height; follows terrain on dual caster wheel. Choice of Rubber finger sweep reel with 96 flexible fingers (Model CF) — or — Nylon bristle brush sweep reel (Model CB) Drive Hydrostatic variable speed pump. Direct coupling to engine. Drives to two, rear mounted Parker heavy duty / high-efficiency hydraulic drive motors on rear wheels. Single hydraulic traction pedal for forward and reverse drive Speed Infinitely variable Forward 0-10 mph Reverse 0-3 mph Braking Dynamic braking through the hydraulic drive system; Manually operated disc type parking brake on rear wheels Battery Automotive Type 24F, 12-volt (battery not included with ocean or air shipment) Construction Hydraulically formed, electrically welded heavy wall steel tubing. Tires & Wheels Front: (1) 18-9.50 x 8 Multi-ribs Rear: (2)23-1050×12 Soft-trac Casters (2) 9 x 3.5 x 4 Steering Manual chain drive with 9.3:1 reduction, 15 in diameter, soft grip automotive type steering wheel. Instrumentation Hydraulic levers to lift/lower debris hopper, open/close debris hopper tailgate and raise/lower of sweeping mechanism head assembly. Hour meter. Controls Single hydraulic traction pedal for forward and reverse Hand-operated throttle control Seat High-back, single-piece construction. Adjustable operator position Electrical 12-volt, electronic key start Sound Level 90 dbA Dimensions Length: 121 in | Width: 66 in | Height: 84 in | Wheel Base: 70 in Weight 1900 lbs. Liquid Capacities Hydraulic system oil: 5 gallons in high-density polyethylene tank. Gasoline (unleaded): 6 gallons in high-density nylon low-perm tank Safety ROPS with operator seat belt Battery located outside of engine, hydraulic compartment. Fire proof fuel lines, hydraulic lines covered with abrasion and leak resistant tube. Fire extinguisher. Operator presence switch in seat for engine start. Complies with all applicable ANSI, OSHA and European Machinery DIrective standards. Options 48-501 Hopper Dust Shield | 48-502 48H Nylon Brush Head , 4 rows of 5″ bristles | 48-503 48H Rubber Finger Reel, 96 Flexible Rubber Fingers
- USD
Sweep Star 60
Sweep Star 60
Self Propelled Three-wheel, tri-cycle configuration with front steering, two rear drive wheels and rear mounted high lift debris hopper. Gas or Diesel Choice of 35 hp (23 kW) twin-cylinder gasoline or 19 hp (15kW) three-cylinder diesel. Highly Productive 60” sweeper head and hydraulic raise/lower easy to empty dump for quick and easy cleanup of any large turf area. Extremely Maneuverable Hydraulically driven, tricycle design makes it extremely maneuverable around trees, fences, buildings or any other obstacle. Specifications Models 76-000DB Sweep Star 60 Brush Reel (gasoline) 76-000DF Sweep Star 60 Finger Reel (gasoline) 77-100CB Sweep Star 60 Brush Reel (diesel) 77-100CF Sweep Star 60 Finger Reel (diesel) Power Gas – 35 hp twin-cylinder, OHV, air-cooled gasoline engine with double action air intake filtration. (Engine mounted plus remote cyclonic filtration system). Diesel – 18.8 hp Kubota liquid-cooled three-cylinder diesel engine with remote mounted cyclonic filtration system Configuration Self-contained, three-wheel, tri-cycle configuration with front steering, two rear drive wheels and rear-mounted high lift debris hopper. Debris Hopper Capacity -3 cubic yards | Construction – 14 gauge steel formed panels High capacity airflow openings at top and rear Sweeper Head Dump - Hydraulic raise / lower debris hopper to dump height to 6’4″ above the ground to dump debris into refuse container. | 60″ wide; belt-driven single rotating reel; adjustable sweeping height; follows terrain on dual caster wheel; (triple caster wheels optional) Choice of Rubber finger sweep reel with 116 flexible fingers (Models 76-000DF gasoline; 77-100CF diesel) — or — Nylon bristle brush sweep reel (Models 76-000DB gasoline; 77-100CB diesel) Drive Hydrostatic variable speed pump. Direct coupling to engine. Drives to two rear-mounted Parker heavy duty/ high-efficiency hydraulic drive motors. Single hydraulic traction pedal for forward and reverse drive. Speed Infinitely variable | Forward 0-10 mph | Reverse 0-3 mph Braking Dynamic braking through the hydraulic drive system; manually operated disc type parking brake on rear wheels Battery Automotive Type 24F, 12-volt (battery not included with ocean or air shipment) Construction Hydraulically formed, electrically welded heavy wall steel tubing. Tires & Wheels Front: (1) 18-9.50 x 8 Multi-ribs | Rear: (2)24-1300×12 Soft-trac | Casters (2) 9 x 3.5 x 4 Steering Manual chain drive with 9.3:1 reduction, 15 in diameter, soft grip automotive type steering wheel. Instrumentation Hydraulic levers to lift/lower debris hopper, open/close debris hopper tailgate and raise/lower of sweeping mechanism head assembly. Hour meter and ammeter Controls Single hydraulic traction pedal for forward and reverse Hand-operated throttle control Seat High-back, single-piece construction. Adjustable operator position Electrical 12-volt, electronic key start Sound Level MODEL 76-000 92 dbA | MODEL 77-100 98 dbA Dimensions Length: 127″ | Width: 74.5″ | Height: 82″ | Wheel Base: 68.5 in Weight 2,200 lbs. Liquid Capacities Gasoline: 6 gallons in high-density nylon low-perm tank | Diesel Fuel: 5 gallons in high-density nylon low-perm tank | No.1-D or No. 2-D, S500: Low Sulfur Diesel (LSD) less than 500 ppm or 0.05 wt.% No1-D or No.2-D, S15: Ultra Low Sulfur Diesel (ULSD) less than 15 ppm or 0.0015 wt.% Hydraulic fluid: 5 gallons in high-density polyethylene tank Safety Rollover protection (ROPS) with seat belt Auto-deploy stabilizer when lifting debris hopper. Fire proof fuel lines, hydraulic lines covered with abrasion and leak-resistant tubes. Fire extinguisher. Complies with all applicable ANSI, OSHA and European Machinery Directive Standards. Options 77-328 60″ Nylon Brush Head , 4 rows of 5″ bristles | 76-329 60″ Rubber Finger Reel, 116 Flexible Rubber Fingers | 76-271 Dust & Dirt Filtration Kit
- USD
Sweep Star V62
Sweep Star V62
The Perfect Solution Whatever debris you collect, the V62 will collect it. From leaves to bird droppings. More Productive Money saving tow behind design plus wide 62” sweeper head and big 4 cubic yard debris hopper increases productivity Adjustable Controls Operator controls every function from the seat of the tow vehicle. Vacuum System Connected to sweeper head to remove debris from ground surfaces and deposit into debris hopper. Specifications Power 25 hp twin-cylinder, OHV, air-cooled gasoline engine with double action air intake filtration. (Engine mounted plus remote Donaldson® filtration system.) Configuration 62″ Self contained, two-wheel, pull-type combination sweeper and vacuum for turf and other surfaces. Pulls behind appropriate tow vehicle. Debris Hopper Capacity – 4 cubic yards | Construction – 14 gauge steel formed panels Sloped hopper bottom with 45° dump angle High capacity airflow openings at top and rear | Dump – Hydraulic open/close of tailgate to dump debris. Sweeper Head Requires one of the following: 78-210 Brush Reel: Single Sweeping reel with nylon bristle brush. 62 in sweeping width to dislodge debris from ground surface. Hydraulic motor drive from base unit hydraulic system. 78-211 Finger Reel: Single Sweeping reel with flexible rubber sweeping fingers. 62 in sweeping width to dislodge debris from ground surface. Hydraulic motor drive from base unit hydraulic system. Tow Hitch Options Requires one of 78-204, 78-206 or 78-209 74-204 5th Wheel hitch for use with Textron®, Toro® and Deere® vehicles equipped with 5th wheel hitch device and trailer brake option. 78-206 Clevis Hitch for use behind tractors 78-209 Ball Hitch for use behind trucks. Vacuum System 22 in diameter x 7 in wide, .25 in balanced high strength abrasion resistant impeller, 3800 CFM displacement, operating inside high strength steel housing with wear-resistant, replaceable liner, large clean out door and drain plug. Connected to sweeper head with flexible air tunnel to remove debris from ground surface and deposit into debris hopper. Drive Engine drives hydraulic pump to power sweeper head, hydraulic motor, and raise and lower tailgate for dumping. Belt driven vacuum impeller with electric clutch. Speed Dependent on tow vehicle. Braking Relies on tow vehicles brakes. Electric Brake Kit optional (requires the use of 78-204, 5th wheel hitch connected to a Jacobsen Turf Truckster® which is equipped with 5th wheel hitch option and electric trailer brake option.) Construction Hydraulically formed, electrically welded heavy wall steel tubing Tires & Wheels Rear: (2)24-1300×12 Soft-trac Casters: (2) 9 x 3.5 x 4 Controls Hydraulic open/close debris hopper tailgate Hydraulic raise/lower of sweeping mechanism head assembly. Electric (toggle switch) engage of vacuum impeller electric clutch - Remote engine start Electrical 12 volt, electronic key start Sound Level 98 dbA Dimensions Length: 131″ | Width: 70″ | Height: 87″ Prime Mover Controls Dual forward/reverse pedal. Hand operated throttle control Seat Adjustable High back suspension seat with arm rests Dimensions (Inches) (Length-Width-Height) 134in – 74.5in – 82in; Wheel base 72in Weight 2550lbs Weight 1500 lbs. Liquid Capacities Fuel: 6 gallons in high density nylon low-perm tank Hydraulic System Oil: 3.2 gallons in high density polyethylene tank Safety Fire extinguisher. Complies with all applicable ANSI, OSHA and European Machinery Directive Standards Options 78-207 Hydraulic lift System for Sweeper Head | 78-208 Dust & Dirt Filtration System | 78-205 12.5 ft Hand held Vacuum Hose | 78-215 Electric Brake Kit for V62 with 78-204 5th Wheel Hitch
- USD
Sweep Star V62-V Turf Vac Sweeper
Sweep Star V62-V Turf Vac Sweeper
Very Affordable Money saving tow-behind design with mechanical drive vacuum impeller. Highly Productive Whatever debris you collect, the V62 will collect it. From leaves to bird droppings. Trouble Free Easy to operate, easy to maintain, easy empty 4 cubic yard hopper. Light Footprint Soft-trac tires protect fine turf as well as non-turf area. Specifications Power 23HP twin-cylinder Configuration 62″ Self-contained, two-wheel, pull-type vacuum for turf and other surfaces. Pulls behind appropriate tow vehicle. Debris Hopper Capacity – 4 cubic yards | Construction – 14 gauge steel formed panels Sloped hopper bottom with 45° dump angle High capacity airflow openings at top and rear | Dump – Electric/Hydraulic open/close of tailgate to dump debris. Vacuum System 22 in diameter x 7 in wide, .25 in balanced high strength abrasion resistant impeller, 3800 CFM displacement, operating inside high strength steel housing with wear-resistant, replaceable liner, large clean out door and drain plug. Connected to sweeper head with flexible air tunnel to remove debris from ground surface and deposit into debris hopper. Tires & Wheels Rear: (2)24-1300×12 Soft-trac | Casters: (2) 9 x 3.5 x 4 Dimensions Length: 151″; Width: 68″; Height: 87″ Weight 1500 lbs
- USD
Sweep Star V72 Power Take-Off Sweeper
Sweep Star V72 PTO Sweeper
Special Feature Combination verticut/sweeper head allowing single-pass application. More Productive 7 cubic yard (5.8 cubic meter) easy-empty debris hopper and 72″ sweeper head. Vacuum Mechanical drive vacuum impeller, hydraulic drive sweeper head and verticut reels. Choice Of Sweeper Heads Rubber finger reel or combination rubber-finger verticut reel. Specifications Models 72-000 Sweep Star V72 PTO (Big Vac) Power 540-RPM Tractor PTO Input (Minimum 40hp) Dual constant Velocity drive shaft from tractor to Big Vac 5 V-Belt drive to vacuum fan Multiple V-belt drive to hydraulic pump 1 1/2″ dia. hardened steel blower drive shaft 1 1/2″ dia. hardened steel jackshaft Hydraulic power to drive motors on Sweeper-Vac head Hydraulic fluid capacity: 17 gallons Remote lubrication system Minimum 35 hp for Sweep only) operation Minimum 45 hp for Sweep and verti-cut operation Configuration 72″ Self contained, two-wheel, pull-type combination sweeper and vacuum for turf and other surfaces. Pulls behind appropriate tow vehicle Debris Hopper Capacity – 7 cubic yard Construction – Steel framework Tapered front to back for easy dumping Dump – Hydraulic raise/lower of tailgate. Hopper tailgate open/close via the mounting arm configuration. Sweeper Head Requires one of the following: 72-001 COMBINATION VERTICUT AND SWEEPER HEAD: L-78″, W- 39″, H-18″ Steel and scalp roller VERTI-CUT REEL 72″ wide Hydraulic driven from main pump to drive motor 72 hardened steel flail knives for verti-cutting SWEEPER REEL 72″ wide Hydraulic driven from main pump to drive motor 4 rows of 6″ long fingers, 24 fingers per row using roller and caster adjustments (4) adjustable caster wheels 12-600×6 pneumatic 72-002 RUBBER FINGER SWEEPER HEAD L-78″, W-18″-Height-18″ Sweeper Reel 72″ wide Hydraulic driven from main pump to drive motor 4 rows of 6″ long fingers, 24 fingers per row using caster adjustments (4) adjustable caster wheels 12-600×6 pneumatic 72-005 BRUSH REEL SWEEPER HEAD L-78″, W-18",-Height-18″ Sweeper Reel 72″ wide Hydraulic driven from main pump to drive motor (4) adjustable caster wheels 12-600×6 pneumatic Vacuum System 34″ diameter, 8 blade vacuum fan High strength steel vacuum fan housing with replaceable wear-resistant liner Clean-out hatch on fan housing connected to sweeper head with flexible air tunnel to remove debris from ground surface and deposit into debris hopper. Drive PTO drives hydraulic pump to power sweeper head and Hydraulic motor. PTO Belt drives vacuum impeller Speed Dependent on tow vehicle. Braking Relies on tow vehicles brakes. Optional: Surge Hydraulic brake package Construction Hydraulically formed, electrically welded heavy wall steel tubing. Tires & Wheels (2) 26.5-1400×12 Fairway type turf tires Controls Hydraulic raise/lower of sweeping mechanism head assembly. Electric (toggle switch) engage of vacuum impeller Sound Level 92 dbA Dimensions Length: 180" | Width: 84" | Height: 87" Weight 3500 lbs. Liquid Capacities Hydraulic System Oil: 17 gallons in steel tank Safety Fire extinguisher. Complies with all applicable ANSI, OSHA and European Machinery Directive Standards. Options 72-003 25 ft Hand-Held Vacuum Hose with Suction Nozzle | 72-004 (factory installed) Hwy package. Hwy tires, surge brakes, tail lights
- USD
Sweep Star V72E Sweeper
Sweep Star V72E Sweeper
Sweeper And Vacuum Mechanical drive vacuum impeller and hydraulic drive 72” sweeper head. Big Capacity Large 7 cubic yard easy-to-empty, easy -to-clean hopper. Power 35 hp twin cylinder Vanguard gasoline engine. Choice of Sweeper Heads Rubber finger reel or combination rubber-finger verticut reel. Specifications Models 73-000 Sweep Star V72E (Big Vac) Power 35 hp Twin Cylinder, OHV air cooled gasoline engine with Donaldson intake filtration, Full pressure lubrication system. Configuration 72″ Self contained, two-wheel, pull-type combination sweeper and vacuum for turf and other surfaces. Pulls behind appropriate tow vehicle. Debris Hopper Capacity – 7 cubic yard | Construction – Steel framework Tapered front to back for easy dumping. Air exhaust vents built into top of debris blower | Dump – Hydraulic raise/lower of tailgate. Hopper tailgate open/close via the mounting arm configuration. Sweeper Head 72-002 RUBBER FINGER SWEEPER HEAD L-78″, W-18″-Height-18″ Sweeper Reel 72″ wide Hydraulic driven from main pump to drive motor 4 rows of 6″ long fingers, 24 fingers per row using caster adjustments (4) adjustable caster wheels 12-600×6 pneumatic 72-005 BRUSH REEL SWEEPER HEAD L-78″, W-18″,-Height-18″, Sweeper Reel 72″ wide Hydraulic driven from main pump to drive motor (4) adjustable caster wheels 12-600×6 pneumatic Tow Hitch Options Requires on of 73-004, 73-005, OR 73-003 73-004 5th Wheel hitch for use with Textron vehicles equipped with 5th wheel hitch device and trailer brake option. 73-005 5th Wheel hitch for use with tractor 3-point hitch (Min 35 hp tractor) 73-005 5th Wheel hitch for use with tractor 3-point hitch (Min 35 hp tractor) Vacuum System 22 in diameter x 7 in. wide, 1/4”, balanced, high strength. Abrasion-resistant impeller, 3800 CFM displacement, operating inside high strength steel housing With wear-resistant, replaceable liner, large clean outdoor and drain plug. Connected to sweeper head with flexible air tunnel to remove debris from ground surface and deposit into debris hopper Drive Engine drives hydraulic pump to power sweeper head and hydraulic motor. Belt drives vacuum impeller through electric clutch Speed Dependent on tow vehicle. Braking Relies on tow vehicles brakes. Electric brakes optional, require the use of 73-004 5th wheel hitch connected to Jacobsen Turf Truckster, which is equipped with 5th wheel hitch option and electric trailer brake option Construction Hydraulically formed, electrically welded heavy wall steel tubing. Tires & Wheels (2) 26.5-1400×12 Fairway type turf tires Controls Hydraulic raise/lower of sweeping mechanism head assembly. Electric (toggle switch) engage of vacuum impeller. Increase/decrease engine speed. Remote engine start. Electrical 12-volt, electronic key start Sound Level 98 dbA Dimensions Length: 180" | Width: 84" | Height: 87" Weight 2950 lbs. Liquid Capacities Gasoline: 5 Gallons in high density nylon low-perm tank Hydraulic System Oil: 3.2 gallons in high density polyethylene tank Safety Fire extinguisher. Complies with all applicable ANSI, OSHA and European Machinery Directive Standards. Options 73-006 25 ft Hand-Held Vacuum Hose
- USD
Tournament Ultra 7580 Greensroller
Tournament Ultra 7580 Greensroller
Specifications ENGINE Power 16 HP Briggs Vanguard gasoline engine, two-cylinder, air-cooled, electronic ignition, full pressure lubrication system with replaceable filter, cast iron cylinder sleeves, engine mounted air filter. Drive Direct drive hydraulic motors eliminate the maintenance required on mechanical drive systems. Configuration A gasoline engine powered, hydraulic drive, riding golf course greens roller. Hydraulic dual roller drive system for superior traction and safety. SPEED Infinitely variable 0 – 10 mph BRAKES AND STEERING Braking Dynamic thru hydrostatic drive system Steering Mechanical chain/sprocket, 16” automotive type steering wheel GREENSROLLER Construction Heavy gauge square steel tubing main frame, hydraulically formed, electrically welded Rollers Two (2) oscillating 8” x 36” length, seamless, drawn over mandrel steel tubes. Bolted hubs with bearings on each end of the rollers. Controls Keyed ignition switch, engine throttle, choke at the operator’s station. Dual drive pedals control left / right operation and rolling speed. Pedals connected to hydraulic pump via fully sealed push / pull cable system Ground Pressure 3.86 PSI Seat High back, one piece for operator comfort Electrical System 12 volt system, electric start to engine Sound Level 72 dbA under normal operating conditions Battery 12 volt Safety Dual drive roller system for superior traction and safe operation in all turf and terrain conditions. Dynamic braking thru hydrostatic drive system. Transport Trailer Low profile design with drop axle rated at 2500 lb. capacity. Extra-wide expended metal bed and tailgate fitted with rubber matting for traction and an adjustable centering guide system for easy “ load / unload “ of the roller.Width – 56”, Length – 47” tailgate “up”, not including drawbar, Weight – 240 lbs., Drawbar – adjustable from 44” to 47”, Tires – 18 -9.50×8 pneumatic Warranty Smithco two (2) year limited warranty Briggs & Stratton two (2) year engine manufacturer warranty WEIGHTS AND DIMENSIONS Length 44" Width 45" Height 49" Weight 895 lbs Liquid Capacities Five (5) gallon fuel tank, three (3) gallon hydraulic oil tank OPTIONS Light Kit 750-450 Greens Spiker Attachment Model 7512
- USD
Tournament Ultra 7590 Greensroller
Tournament Ultra 7590 Greensroller
Specifications ENGINE Power 16 HP Briggs Vanguard gasoline engine, two cylinder, air-cooled, electronic ignition, full pressure lubrication system with replaceable filter, cast iron cylinder sleeves, engine mounted air filter. Configuration A gasoline engine powered, hydraulic drive, riding golf course greens roller. Hydraulic dual roller drive system for superior traction and safety. Drive Direct drive hydraulic motors eliminate the maintenance required on mechanical drive systems. SPEED Infinitely variable 0 – 9 mph BRAKES AND STEERING Braking Dynamic thru hydrostatic drive system Steering Hydraulic power steering GREENSROLLER Construction Heavy gauge square steel tubing main frame, hydraulically formed, electrically welded Rollers Two (2) oscillating 8” diameter x 36" length, seamless, drawn over mandrel steel tubes. Beveled on both ends with roller scrapers. Bolted hubs with bearings on each end of both rollers. Controls Keyed ignition switch, engine throttle, choke at the operator’s station. Dual drive pedals control left / right operation and rolling speed. Pedals connected to hydraulic pump via fully sealed push / pull cable system Ground Pressure 3.86 PSI Seat High back, one piece for operator comfort Electrical System 12 volt system, electric start to engine Sound Level 72 dbA under normal operating conditions Battery 12 volt Safety Dual drive roller system for superior traction and safe operation in all turf and terrain conditions. Dynamic braking thru hydrostatic drive system. Transport Trailer Low profile design with drop axle rated at 2500 lb. capacity. Extra wide expended metal bed and tailgate fitted with rubber matting for traction and an adjustable centering guide system for easy “ load / unload “ of the roller.Width – 56”, Length – 47” tailgate “up”, not including drawbar, Weight – 240 lbs., Drawbar – adjustable from 44” to 47”, Tires – 18-9.50×8 pneumatic Warranty Smithco two (2) year limited warranty Briggs & Stratton two (2) year engine manufacturer warranty WEIGHTS AND DIMENSIONS Length 44" Width 45" Height 49" Weight 845 lbs Liquid Capacities Five (5) gallon, three (3) gallon hydraulic oil tank OPTIONS Light Kit 750-450 Greens Spiker Attachment Model 7512
- USD