Dalton Ag, Smithco, Capillary Flow, Steiner, Yanmar, Traqnology - ABI

SMITHCO PULSE WIDTH MODULATION ADVANCED RATE CONTROL/NOZZLE SYSTEM WITH CHOICE OF EITHER: Automatic Field Computer Spray Control System (Star Command 1-a) Automatic Matrix GPS Guided Field Spray Controller (Star Command II-a) SPRAY STAR 2000 WITH STAR COMMAND II-A SYSTEM & 18.5 FOOT (5.5M) SPRAY BOOM (GASOLINE ENGINE POWER) Advanced precision TeeJet Matrix GPS Satellite guided Field Computer. Terra Star Antenna for use with GS, WAAS & Glonass Satellites. Provides Sub-2 in (5 cm) position control and permanently retained mapping. Smithco/TeeJet DynaJet Pulse Width Modulation. Pressure & droplet size control. Wide ground speed range. Purpose-built 18 ft (5.5 meter) Spray Boom. Dual Nozzle-Dual Solenoid Valve System. SPRAY STAR 2000 WITH STAR COMMAND I-A SYSTEM & 20 FOOT (6 M) SPRAY BOOM (GASOLINE ENGINE POWER) Advanced Rate Control Field Computer (TeeJet Radion 8140) with DynaJet Pulse Width Modulation System. Presssure and droplet size control. Wide range of ground speed. Purpose-built spray boom with dual nozzles and dual solenoid valves. SPRAY STAR 2000 WITH STAR COMMAND I SYSTEM & 18.5 FOOT (5.5M) SPRAY BOOM (GASOLINE ENGINE POWER) Same extreme application ability as Model 2007 G/D (Above) except 20 ft./6m Spray Boom. STAR COMMAND FEATURES No one matches our 9 years of experience developing the most precise application available for spraying chemicals on turf. With our Partner, TeeJet® Technologies, the Star Command System features all of TeeJet’s® previous benefits available on every Star Command sprayer, as well as these exclusive new features: TURN COMPENSATION  corrects flow to keep application rates on target through turns as tight as 20 feet. It lets you avoid straight- line applications on contoured area or rates varying as much as 50% from the inside to the outside of a boom. That doubles the application rate on the inside and cuts the outside rate in half. TEN INCH NOZZLE SPACING  to cut off-target applications in half. This spacing also allows for more efficacy because of increased overlap of the spray patterns. VIRTUAL, ON-SCREEN NOZZLE CONTROL.  TeeJet’s® new job computers operate up to 100 nozzle sections that can be controlled individually. This eliminates the need for extra cabling and job-stopping failure of mechanical switches. THE DYNAJET SYSTEM  is also incorporated into the Matrix 908 controller, eliminating extra cabling and separate controller. TERRASTAR-C PRO  significantly reduces Convergence Time, to as little as 90 seconds or less. View Specifications

Advanced electronic controls. High power transfer ratio Repeatable operating speed Low fuel consumption due to increased transmission efficiency Step-less main shift Best speed possible for implement Clutch-less shifting Vehicle stop without clutch Our YT3 Series tractors are designed to make work easier for people of all skill levels. The YT347 includes an autothrottle that enables you to control engine and travel speed with the accelerator/drive pedal. This makes operating the tractor like driving a car or truck with an automatic transmission car. A/B Mode lets you preset your maximum travel speed. An anti-stall feature keeps your engine running when you dig or lift a heavy load. There’s also cruise control to keep you moving efficiently when mowing or traveling for long stretches. YANMAR designs and builds the major components, engine, front axle, transmission, and final drive, to work together. No other compact tractor can boast the integrated hydraulic mechanical transmission (i-HMT) technology of the YANMAR YT347. The i-HMT creates the standard of operation for more versatile performance. No longer do you have to choose between an efficient, constant speed and flexible operation. With the YT347 and its innovative technology, you get both. Features Ergonomic operator station Controls on joystick Large LCD display integrates with controls Anti-stall Electronic cruise control Rear remote Loader control valve & joystick 12V outlet Advanced electronic controls Auto-throttle A/B Mode Throttle boost button i-HMT Transmission Loader 3rd function valve optional I-HMT (Integrated Hydro Mechanical Transmission): High power transfer ratio Repeatable operating speed Low fuel consumption due to increased transmission efficiency Step-less main shift Best speed possible for implement Clutch-less shifting Vehicle stop without clutch Gross Power: EPA Regulation HP (kW) 46 HP (34.3 kW)* Overall length (with 3PH and R4 Tires) 130.9” (3,325 mm) Overall Width (with R4 Tires) 70.6” (1,793 mm) Overall Height (with Roll-Over Protection, and R4 tires) 95.7” (2,431 mm) Transmission I-HMT(Integrated Hydro Mechanical Transmission) Drive Type 2WD/4WD selectable engagement Lift Capacity (Pivot Pin) lb. (kg) 2,500 lbs. (1,134 kg)

Add a cab with heating and air conditioning, and the YANMAR YT347C tractor will keep you working, whatever the weather. An innovative curved-glass windshield greatly improves visibility. Air filtration keeps the dust out. And, like all of our YT3 Series tractors, this model includes the integrated hydraulic mechanical transmission (iHMT) technology Yanmar engineered for more versatile performance. High power transfer ratio Repeatable operating speed Low fuel consumption due to increased transmission efficiency Step-less main shift Best speed possible for implement Clutch-less shifting Vehicle stop without clutch Our YT3 Series tractors are designed to make work easier for people of all skill levels. The YT347C includes an autothrottle that enables you to control engine and travel speed with the accelerator/drive pedal. This makes operating the tractor like driving a car or truck with an automatic transmission car. A/B Mode lets you preset your maximum travel speed. An anti-stall feature keeps your engine running when you dig or lift a heavy load. There’s also cruise control to keep you moving efficiently when mowing or traveling for long stretches. YANMAR designs and builds the major components, engine, front axle, transmission, and final drive, to work together. No other compact tractor can boast the integrated hydraulic mechanical transmission (i-HMT) technology of the YANMAR YT347C. The i-HMT creates the standard of operation for more versatile performance. No longer do you have to choose between an efficient, constant speed and flexible operation. With the YT347C and its innovative technology, you get both.

When you need a tractor for bigger and tougher jobs, look no further than the Yanmar YT359. Comfortable and easy to operate, the YT359 uses advanced electronic controls and an integrated hydraulic mechanical transmission (i-HMT). No longer do you have to choose between an efficient, constant speed and flexible operation. The i-HMT creates the standard for performance versatility. High power transfer ratio Repeatable operating speed Low fuel consumption due to increased transmission efficiency Step-less main shift Best speed possible for implement Clutch-less shifting Vehicle stop without clutch Our YT3 Series tractors are designed to make work easier for people of all skill levels. The YT359 includes an autothrottle that enables you to control engine and travel speed with the accelerator/drive pedal. This makes operating the tractor like driving a car or truck with an automatic transmission car. A/B Mode lets you preset your maximum travel speed. An anti-stall feature keeps your engine running when you dig or lift a heavy load. There’s also cruise control to keep you moving efficiently when mowing or traveling for long stretches. YANMAR designs and builds the major components, engine, front axle, transmission, and final drive, to work together.

Stop worrying about rain, snow, heat and cold. Tackle big, tough jobs regardless of the weather in the Yanmar YT359C with a cab, heating and air conditioning. Comfortable and easy to operate, the YT359C uses advanced electronic controls and an integrated hydraulic mechanical transmission (i-HMT). The innovative transmission creates the standard of operation for more versatile performance. High power transfer ratio Repeatable operating speed Low fuel consumption due to increased transmission efficiency Step-less main shift Best speed possible for implement Clutch-less shifting Vehicle stop without clutch Yanmar's YT3 Series tractors are designed to make work easier for people of all skill levels. The YT359 includes an autothrottle that enables you to control engine and travel speed with the accelerator/drive pedal. This makes operating the tractor like driving a car or truck with an automatic transmission car. A/B Mode lets you preset your maximum travel speed. An anti-stall feature keeps your engine running when you dig or lift a heavy load. There’s also cruise control to keep you moving efficiently when mowing or traveling for long stretches. YANMAR designs and builds the major components, engine, front axle, transmission, and final drive, to work together.