GSI InterSystems, Hustler, Simonsen, Redexim, ABI, Quality Steel, Turfco, Steiner - Case IH

Mete-R-Matic®, the best-known brand in topdressing, sets the standard for uniform application. The Mete-R-Matic IV is the ideal choice for golf greens, tees, driving ranges, and sports fields. The patented Chevron® belt guarantees a uniform application of all types of materials regardless of moisture content, including top dresser sand and soil top dresser applications. The patented ground drive system means that you're always getting a consistent rate, regardless of how fast or slow the operator drives. No hydraulics, no pumps, no engines. Just set your application rate and go with this top dresser machine. OVERVIEW  The Mete-R-Matic® IV, featuring a patented Chevron® belt, is the first and only top dressing spreader to ensure uniform application of all types of materials and varying levels of moisture content, including wet sand. Perfect for after aerification, it consistently applies a wide variety of top dressing lawn mixtures such as sand, organic compost, peat humus, and rye grass, as well as crumb rubbers, gypsum, lime, and calcine clays.  Ideal for golf greens, cultured grasses, and other areas sensitive to weight, this Turfco topdresser utilizes an eco-friendly, patented ground-drive system. When you speed up, slow down, or cross uneven terrain, the conveyor belt and brush automatically adjust at the same rate to provide a consistent and even application every time. No hydraulics, no pumps, and no engines. Just hook up and go.  A wide, galvanized hopper won't rust or flake and is easily loaded with the Turfco CR-15 or other front-end loaders. Easily towed by turf truck vehicles, the Mete-R-Matic IV is designed to handle any topdressing program.  KEY FEATURES Patented ground drive system means you're always getting a consistent rate, regardless of how fast or slow the operator drives. Eco-friendly ground drive — no hydraulics, pumps, or engines. Patented Chevron is the first and only belt to ensure uniform application of all types of materials with varying levels of moisture, including wet sand, organic compost, peat humus, and rye grass, as well as crumb rubbers, gypsum, lime, and calcine clays. All six wheels drive the machine for consistent application on uneven terrain. Wide hopper design is easily loaded with a front-end loader or the Turfco® CR-15. Easily towed by turf truck vehicles. Proven, battle-tested design has been the standard of the industry since 1981. Galvanized hopper (no rusting — or potential rust flakes in topdressing material). CONSISTENTLY APPLY WET OR DRY Turfco Mete-R-Matic topdressers, featuring a patented Chevron belt, are the first and only to ensure uniform application of all types of materials and varying levels of moisture content, including wet sand. You can consistently apply a wide variety of topdressing mixtures such as sand, organic and inorganic compost, peat and humus, rye grass, as well as crumb rubbers, gypsum, lime, and calcine clays. ECO-FRIENDLY GROUND DRIVE The Mete-R-Matic IV utilizes a patented ground-drive system. When you speed up, slow down, or cross uneven terrain, the conveyor belt and brush automatically adjust at the same rate to provide a consistent and even application every single time. No hydraulics, no pumps, and no engines. Just hook up and go with the Turfco topdresser. TACKLE ANY TOPDRESSING JOB Our one-cubic-yard hopper with a unique half-moon metering gate makes quick work of any topdressing task. Set your rate and know that your operator will get that rate all day long. Easily towed by turf truck vehicles. Simple and intuitive design, combined with a three-year warranty, guarantees you and your staff can complete your applications with confidence. Whether you need to apply top dressing lawn treatments or other materials, the top dresser machine provides efficient, reliable results every time. SPECIFICATIONS Model 85424 Drive Wheels are driven by the ground; all six tires mechanically drive the conveyor and brush; no engine; no hydraulic system Hopper Capacity 1 yd3 (0.76 m3) Hopper Size Top: 73 ½" x 39 3/8" (1.87 m x 1.00 m), Bottom: 60" x 20" (1.5 m x 0.51 m), Depth: 19" (0.48 m) Spreading Width 60" (1.5 m) Topdressing Speed Up to 8 MPH (12.8 km/h) Transport Speed Empty: up to 15 MPH (24 km/h), Loaded: up to 8 MPH (12.8 km/h) Application From very fine to ¼" (6.5 mm) Conveyor Belt Wide rubber composition with patented, Chevron belt 60" (1.5 m) Metering Gate Taintor gate design is easily adjusted and provides a uniform opening up to 2 ¼" (57 mm) Brush 9" (228 mm) diameter, polypropylene bristle Controls Electric clutch actuator to engage conveyor and brush. Metering gate control for depth of application. Clutch The main clutch is a mechanical ratchet design actuated electrically from the operator’s position on the tow vehicle. Wheels & Tires Six, 16" x 6.50" x 8" rib tread turf tires Hitch Heavy-duty pin hitch Empty Weight 882 lb (400 kg) Warranty 3 Years

Mete-R-Matic®, the best-known brand in topdressing, sets the standard for uniform application. The Mete-R-Matic XL with a 2.25 cubic yard hopper is the ideal choice for large turf areas, requiring less reloading and transportation for increased efficiency and productivity. The patented Chevron belt guarantees a uniform application of all types of materials regardless of moisture content. The patented ground drive system means that you're always getting a consistent rate regardless of how fast or slow the operator drives. No hydraulics, no pumps, no engines. Just set your application rate and go. OVERVIEW The Mete-R-Matic® XL is ideal for large turf areas with 2.25 cubic yards, less reloading and transportation.  Featuring a patented Chevron® belt, the Mete-R-Matic series was the first to ensure uniform application of all types of materials and varying levels of moisture content, including wet sand. Perfect for after aerification. You can consistently apply a wide variety of topdressing mixtures such as sand, organic compost, peat humus, and rye grass, as well as crumb rubbers, gypsum, lime and calcine clays. This topdresser utilizes an eco-friendly, patented ground-drive system. When you speed up, slow down or cross uneven terrain, the conveyor belt and brush automatically adjust at the same rate to provide a consistent and even application every time. No hydraulics, no pumps and no engines. Just hook up and go. The large, galvanized hopper won't rust or flake and is easily loaded with the Turfco CR-15 or other front-end loader. The Mete-R-Matic XL is designed to handle any topdressing program. KEY FEATURES 2.25 Cubic yard hopper requiring less transportation and reloading  Patented ground drive system means that you're always getting a consistent rate regardless of how fast or slow the operator drives. Eco-friendly ground drive - no hydraulics, pumps or engine. Patented Chevron belt is the first and only to ensure uniform application of all types of materials with varying levels of moisture, including wet sand. Wide hopper design is easily loaded with front-end loader or the Turfco® CR-15. Proven, battle-tested design has been the standard of the industry since 1981. Galvanized hopper (no rusting—or potential rust flakes in topdress material). 3-Year warranty. CONSISTENTLY APPLY WET OR DRY Turfco Mete-R-Matic topdressers, featuring a patented Chevron ®  belt, are the first and only to ensure uniform application of all types of materials and varying levels of moisture content, including wet sand. You can consistently apply a wide variety of topdressing mixtures such as sand, organic and inorganic compost, peat and humus, rye grass, as well as crumb rubbers, gypsum, lime and calcine clays. ECO-FRIENDLY GROUND DRIVE The Mete-R-Matic XL utilizes a patented ground-drive system. When you speed up, slow down or cross uneven terrain, the conveyor belt and brush automatically adjust at the same rate to provide a consistent and event application every single time. No hydraulics, no pumps and no engines. Just hook up and go. TACKLE ANY TOPDRESSING JOB At 2.25 cubic yards, the Mete-R-Matic XL is ideal for large turf areas, requiring less reloading and increasing transportation efficiency. The larger capacity hopper can easily be filled with a Turfco CR-15  or other front-end loader. Made of galvanized steel, the self-cleaning hopper won't rust or flake. SPECIFICATIONS <table style="border:1px solid black;border-collapse:collapse;padding:1px "> Model 85460 Drive Wheels are driven by the ground; all tires mechanically drive the conveyor and brush; no engine; no hydraulic system Hopper Capacity 60.75 ft3 (1.72 m3; 2.25 yd3), galvanized panels Hopper Size Top: 79" x 65" (2.0 m x 1.7 m), Bottom: 60" x 46" (1.5 m x 1.17 m), Depth: 19" (0.48 m) Payload 6,000 lb (2,721 kg) Spreading Width 60" (1.5 m) Topdressing Speed Up to 8 MPH (12.8 km/h) Transport Speed Up to 8 MPH (12.8 km/h) Conveyor Belt Wide rubber composition with patented Chevron belt 60" (1.5 m) Metering Gate Taintor gate design is easily adjusted and provides a uniform opening up to 2 ¼" (57 mm) Brush 9" (228 mm) diameter, polypropylene bristle Controls Electrically operated clutch for conveyor and brush drive. Metering gate adjusted by hand. Clutch The main clutch is a mechanical ratchet design actuated electrically from the operator’s position on the tow vehicle Wheels & Tires Two, 33" x 15.50" – 16.5" flotation tires Hitch Adjustable height clevis 1" pin hitch Tractor Requirements Minimum of 30 HP (22.4 kW) Empty Weight 2,110 lb (957 kg) Electrical Requirements 12 volt DC, negative ground (electrical power provided by tow vehicle)

The CR-8 is the perfect machine for golf courses needing more capacity for materials but without a larger tractor. New larger capacity 2.0 cubic yard self-cleaning hopper easily handles wet or dry material. Hydraulic controls combined with Turfco's patented WideSpin Technology give you greater control and wider range of applications. Hydraulics are controlled by a patented three-position switch with belt and spinner control and manually adjusted hydraulic speeds, all designed to give the operator maximum control over field operations. OVERVIEW The CR-8 makes topdressing even easier by combining patented technology with built-in versatility. New hydraulic controls, combined with WideSpin™ Technology, give you greater control and a wider range of applications to deliver your most accurate spread from light to heavy, wet or dry, and up to 45-feet wide. Reduce the number of passes and decrease traffic our your turf with even, edge-to-edge applications. The heavy-duty galvanized steel hopper can handle up to 2 cubic foot in capacity, including lime, sand, stone, wood chips, compost, soil conditioners and grass clippings. It's a higher capacity machine in a modestly sized package, right-sized for mounting on smaller tractors equipped with 30-hp or greater engines (for powering hydraulics operations). In action, the CR-8 is rated for top speed operation at 8 mph, which means it can cover a lot of ground in a relatively short period of time. The spinner angle can be adjusted to allow for driving topdressing material into the turf, minimizing the need for brushing and eliminating variations in moisture control. The CR-8 rolls on four 26.5 x 14-12 4-ply tires with walking high beam suspension, allowing for higher tire pressures that ease the trailer’s impact on the turf. The curved metering gate is fully manually adjustable. KEY FEATURES The CR-8 is perfect for golf courses and sports fields when you need more capacity without using a larger tractor. New larger capacity 2.0 yd 3  self-cleaning, galvanized hopper easily spreads wet or dry material, including sand, lime, compost, soil conditioners and grass clippings. New hydraulic controls, combined with WideSpin Technology, give greater control and wider range of applications to deliver your most accurate spread from light to heavy, wet to dry, and up to 45-feet wide. Reduce the number of passes and decrease traffic with edge-to-edge applications. Drive topdressing down into the turf canopy by adjusting the spinner angle, minimizing the need for brushing and eliminating variations in moisture content (spreads the same wet or dry). Four-wheel dual walking beam suspension for low psi. Standard 3-year warranty. EDGE-TO-EDGE TOPDRESSING Save time and reduce wear on your turf with Turfco's patented WideSpin™ edge-to-edge technology. Decrease the number of passes on your turf by up to 720 per year as compared to the wheel-to-wheel method. Improve productivity and save time; unique 30-foot wide, even spread makes it possible to cover your turf without having to do overlapping. Increase your productivity and dramatically reduce traffic on your course, minimizing the potential for soil compaction and hydraulic leaks. MORE CAPACITY, LOW PSI New larger capacity 2.0 yd 3  self-cleaning galvanized hopper easily spreads wet or dry material, including lime, sand, stone, wood chips, compost, soil conditioners and grass clippings. Four-wheel dual walking beam suspension for low psi also provides lower center of gravity for stability. UNPARALLELED PRODUCTIVITY The CR-8 makes topdressing even easier by combining patented technology with built-in versatility. New hydraulic controls, combined with WideSpin™ Technology, give you greater control and a wider range of applications to deliver your most accurate spread from light to heavy, wet or dry, and up to 45-feet wide. Reduce the number of passes and decrease traffic our your turf with even, edge-to-edge applications. SPECIFICATIONS <table style="border:1px solid black;border-collapse:collapse;padding:1px "> Model 85473 Drive Tractor’s hydraulic system powers belt and attachments Hopper Capacity 2.0 yd3 (1.54 m3) Hopper Galvanized steel Spreading Width 12' to 40' (3.6 m to 12.0 m) Transport Speed Up to 8 MPH (12.8 km/h) Topdressing Speed Up to 8 MPH (12.8 km/h) Conveyor Belt 18" (0.46 m) wide, pebble grain surface with heavy-duty polyester cord, single seam Metering Gate Full manual adjustment with curved gate Controls Patented 3-position switch with belt and spinner control and manually adjusted hydraulic speeds Wheels & Tires Four 26.5 x 14-12 4-ply turf tires with walking high beam suspension Hitch Heavy-duty pin hitch Tractor Requirements Minimum of 30 HP (22.4 kW) with one bank of hydraulics and 6 GPM flow Empty Weight 1,421 lb (644 kg) Dimensions 144" (3.6 m) long x 75" (1.9 m) wide x 67" (1.7 m) tall Optional Attachments Material handler conveyor with swivel (#86181) Warranty 3 years

Turfco's largest capacity product, the CR-15 combines unprecedented productivity and precision topdressing into one workhorse of a machine. It frees up your time and gives you the confidence knowing you're meeting your agronomic goals. Turfco's new digital Smart Controller gives you the ability to take control of your topdressing program. Calculate your rates, save your preferred settings and tackle any of your projects on your course. One season with the CR-15 and you'll wonder how you ever got by without it. OVERVIEW The CR-15 Large Area Topdresser & Material Handler revolutionizes fairway and large area topdressing in the same way the WideSpin 1550 does for greens. It comes equipped with a digital Smart Controller that gives superintendents the ability to calculate their preferred rates then lock in rates and widths into four savable pre-sets. Operators can switch between presets on the fly for greater productivity. The edge-to-edge spread capability offers a consistent application that's pinpoint accurate, eliminating waste. Miscalculating a spread by five feet off the fairways can add up to 4 hoppers loads or more. Areas needing heavier applications like landing zones can be handled with the push of a button. Backed by a 3-year warranty, the CR-15 doubles as an all-purpose construction and renovation machine. Quickly load other topdressers, turf vehicles and spreaders or move around the course. Use it on a daily basis for everything from renovating bunkers and filling ditches to fixing washout areas. Topdress fairways Load topdressers In-house construction Renovate bunkers Fill irrigation trenches Transfer material to hard-to-reach places Fix washout areas Rebuild tees KEY FEATURES Lock in preferred rates and widths into four savable presets. Switch between presets on the go, never leaving the seat. Switch from narrow to wide widths while maintaining the same rate. The CR15 is able to instantly adjust to heavier rates for landing zones or drainage areas Input your square footage and desired rates into the controller to calculate material amount and rates. Controller covered by 3 year warranty. Unique frame design keeps tongue weight consistent with shifting loads and provides greater clearance for attachments. No need to lift rear of unit to transport around the property, or when topdressing. Keeps your CGI low for comfortable control. Rear mounted cross conveyor with 180 degree swivel gives easy access to tight areas and allows operator to evenly spread around material without moving machine. Dual-beam suspension provides lower center of gravity for maximum stability. Self-cleaning hopper made of galvanized steel keeps wide range of material flowing freely. No need for costly hopper vibrator. “Fast Attach” system requires no tools when connecting attachments. The rear of the CR-15 raises up to 6 ft for quick loading of topdressers, turf vehicles and spreaders. Low profile and light PSI let you easily move large volumes of material. PATENTED SMART CONTROLLER Our unique digital Smart Controller let's you lock in your preferred rates and widths into four savable presets, allowing operators to switch between them on the fly, never leaving the seat. Instantly adjust to heavier rates on landing zones or draining areas by pushing a button. Switch from narrow to wide widths while maintaining the same rate. The controller even helps you calculate material - just input square footage and desired rate into the on-board calculator to get the amount needed. Covered with a three year warranty. Truly a smart controller. SAVE ON MATERIAL AND LABOR With the CR-15 you can easily adjust spread widths while keeping the same material rates, saving on material and labor. The edge-to-edge capability offers a consistent application that's pinpoint accurate. Miscalculating a spread by five feet off the fairway can add up to 4 hopper loads or more of material. Areas needing heavier applications like landing zones can be handled at the push of a button. WORKFORCE MULTIPLIER The CR-15 doubles as an all-purpose construction and renovation machine. Quickly load other topdressers, turf vehicles and spreaders or move around the course. Use it on a daily basis for everything from renovating bunkers and filling ditches to fixing washout areas. Add a conveyor attachment and place material like bunker sand right where you want it. One season with the CR-15 and you'll wonder how you ever got by without it. SPECIFICATIONS <table style="border:1px solid black;border-collapse:collapse;padding:1px "> Model #85442 with brakes; #85443 without surge brakes Drive Tractor’s hydraulic system powers belt and attachments Hopper Capacity 4 yd3 (3.06 m3) Hopper Galvanized steel panels Transport Speed Up to 15 MPH (24 km/h) empty; Up to 8 MPH (12.8 km/h) loaded Topdressing Speed Up to 6 MPH (9.6 km/h) Conveyor Belt 32" (0.81 m) wide, pebble grain surface with heavy-duty polyester cord Metering Gate Full manual adjustment with the ability to fully open entire rear hopper panel Smart Control 3-position switch; 4 programmable presets; onboard rate calculator; instantaneous belt and spinner speed control Wheels & Tires Four 31" x 15.5"-15" turf tires Hitch Heavy-duty, adjustable height pin hitch Tractor Requirements Minimum of 40 HP (29.4 kW) with one bank of hydraulics Empty Weight 3,600 lb (1,630 kg) Dimensions 185" (4.7 m) long x 84" (2.1 m) wide x 86" (2.2 m) tall (lowered), 91" (2.3 m) tall (raised) Optional Equipment Conveyor Attachment (#86147); Conveyor Attachment Swivel (#86149); WideSpin Spinner Attachment (#86300) Warranty 3 Years, including Smart Controller

Damaged turf on your #7 tee? Weak areas on your #2 and #12 greens? Want to improve the overall stand of grass on your high traffic areas? With the TriWave™ 45 Overseeder you can repair, restore and renew the beauty of your course faster and with better results than ever before. Quickly hook-up to your favorite turf vehicle and go. The TriWave's 1½-inch seed spacing, combined with two independent floating heads, greatly increases germination by following the contours of the terrain with minimum disruption to turf. OVERVIEW If you want to get great germination with less disruption, get a TriWave™ 45 Overseeder. As with the many superintendents who helped in its development, you'll find the TriWave truly delivers on the needs to better follow contours, to get better germination rates, and to get the seeds at the right depth without the disruption. Whether its your fairways, roughs, tees, driving ranges, or greens, the TriWave is the answer. The patented delivery system places seed directly into the slit, reducing waste while further increasing germination. And, seed depth can be infinitely adjusted in the field to suit the needs of each situation. With the TriWave 45's floating heads, you won't miss the low spots or destroy the high spots or unmarked sprinkler heads. Patented WaveBlade technology, counter-rotating at 900 RPM, creates a clean, optimal square slit while minimizing turf disruption.  If you want to get great germination with less disruption, demo the TriWave 45 Overseeder soon. You'll find the it truly makes a difference on your course. KEY FEATURES Hooks up to your favorite turf vehicle and seeds while you turn so you can follow greens, collars and contours. No tractor or PTOs required. Dual 18-inch floating heads follow the contours of the ground so you won’t miss the low spots, damage the high spots or sprinkler heads. Floating heads dramatically increase germination rates. Patented seed delivery system puts the seed directly into the slit, reducing waste and increasing germination. Patented WaveBlade technology, counter-rotating at 900 RPM, creates a clean, optimal square slit while minimizing turf disruption. Patented depth adjustment allows for infinite, in-field adjustment to suit your specific needs, no tools required. Close 1-1/2" spacing increases germination with fewer passes. Easy to switch out green blades to fairway blades. 3-Year warranty. MINIMIZE TURF DISRUPTION The Turfco TriWave™ series of overseeders includes Turfco's revolutionary patent-pending floating heads that follow the controls of the ground so you won't miss the low spots or damage the high spots or unmarked sprinkler heads. This helps optimize seed-to-soil contact for better germination – up to 30% better. Work more efficiently when you can hook up to your turf vehicle and quickly seed all your trouble spots in one trip. SEED RIGHT THE FIRST TIME Turfco worked directly with sports turf managers to help design the innovative TriWave series of overseeders. The patented quick-adjust depth control is one of the innovations developed to make overseeding more effective and time productive. With quick-adjust you can easily adjust how deep you want to deliver seeds based on the varying conditions. No need for time-wasting mechanical guesswork. OPTIMIZE SEED-TO-SOIL CONTACT Patented WaveBlade technology, counter-rotating at 900RPM, creates a clean, optimal square slit while minimizing turf disruption. Traditional overseeders create a v-shaped slit, causing seeds to lay on top each other for inconsistent soil contact. TriWave's square slit drops seeds at the right depth and directly onto the soil. The result is up to 30% better germination. SPECIFICATIONS <table style="border:1px solid black;border-collapse:collapse;padding:1px "> Model 85858 - equipped with factory installed Standard Fairway Blades; 85859 - equipped with factory installed Greens Blades Width 66" (1.67 m) Height 56.5" (1.43 m) Length 80.5" (2.05 m) Capacity 3.2 ft3 (0.09 m3 ) Approx. 50 lb of grass seed Seed Application Pattern Seed spacing 1-1/2" (38.1 mm) apart Seeding Width 40" (1.01 m) Seed Gate Automatic operation, adjustable variable opening Ground Speed Operating Speed: 3 MPH (4.8 km/h); Transport Speed: 6 MPH (9.6 km/h) Transport Speed Up to 6 MPH (9.6 km/h) (maximum) Productivity 5, 868 yards/hour at 3 mph (4,897 sq meters/h at 4.8 km/h) Cutting Heads 2 heads, independently floating Blade Assembly 2 WaveBlade sets, 20 blades total Blade Assembly Operating Depth Range 0 to 1 3/8" (0 to 34.9 mm) Engine 25 HP Briggs and Stratton Vanguard with electric start and 20 AMP charging system Electrical Fuse protected electric clutch and seed box motor. Requires customer supplied 12 volt DC group U1 battery Hydraulics Hydraulic cylinder to raise/lower the wheels. Hydraulic power supplied by the tow vehicle Clutch Electric clutch with double groove V-belt Hitch Standard 5/8" pin, equipped with jackstand Weight 1,070 lbs (485 Kg) hopper empty Optional Equipment Hydraulic Power Kit (HPU) (hose kit not needed when equipped with HPU) #86196 Hydraulic Hose Kit for use with Cushman Truck (#86505) Hydraulic Hose Kit for use with Toro or John Deere Trucks (#86506) Warranty 3 Years

Working directly with golf course superintendents, Turfco designed the innovative TriWave™ 60 Overseeder to produce the results you need. TriWave's 1½-inch seed spacing, combined with three independent floating heads, greatly increases germination rates by following the contours of the terrain for consistent seed depth. It's WaveBlade technology creates clean, optimal slit widths for better seed-to-soil contact while keeping turf disruption to a minimum. Achieve up to 30% better germination. OVERVIEW If you want to get great germination with less disruption, get a TriWave™ 60 Overseeder. As with the many superintendents who helped in its development, you'll find the TriWave truly delivers on the needs to better follow contours, to get better germination rates, and to get the seeds at the right depth without the disruption. Whether its your fairways, roughs, tees, driving ranges, or greens, the TriWave is the answer. The patented delivery system places seed directly into the slit, reducing waste while further increasing germination. And, seed depth can be infinitely adjusted in the field to suit the needs of each situation. With the TriWave 60's floating heads, you won't miss the low spots or destroy the high spots or unmarked sprinkler heads. Patented WaveBlade technology, counter-rotating at 900 RPM, creates a clean, optimal square slit while minimizing turf disruption.  If you want to get great germination with less disruption, demo the TriWave 60 Overseeder soon. You'll find the TriWave truly makes a difference on your course. KEY FEATURES 60-inch application width combines with close, 1-1/2 inch spacing to give you the most productive, highest-germination rate seeder available. Seed box ground drive ensures consistent seed rate. Patented floating heads follow the contour of the ground so you won’t miss the low spots or damage the high spots or unmarked sprinkler heads. Patented seed delivery system works with the WaveBlade technology to optimize seed-to-soil contact with minimal turf disruption. Patented depth adjustment allows for infinite, in-field adjustment to suit your specific needs, no tools required. Close 1-1/2" spacing increases germination with fewer passes. THE NEXT WAVE IN SEEDING IS HERE The Turfco TriWave™ series of overseeders includes Turfco's revolutionary patent-pending floating heads that follow the controls of the ground so you won't miss the low spots or damage the high spots or unmarked sprinkler heads. This helps optimize seed-to-soil contact for better germination – up to 30% better. Work more efficiently when you can hook up to your turf vehicle and quickly seed all your trouble spots in one trip. SEED RIGHT THE FIRST TIME Turfco worked directly with golf course superintendents to help design the innovative TriWave series of overseeders. Turfco's patented depth adjustment technology is one of the innovations developed to make overseeding more effective and time productive. It allows for infinite, in-field adjustment so you can easily adjust how deep you want to deliver seeds based on the varying conditions. No tools required means no need for time-wasting mechanical guesswork. OPTIMAL SEED-TO-SOIL CONTACT Patented WaveBlade technology, counter-rotating at 900RPM, creates a clean, optimal square slit while minimizing turf disruption. Traditional overseeders create a v-shaped slit, causing seeds to lay on top each other for inconsistent soil contact. TriWave's square slit drops seeds at the right depth and directly onto the soil. The result is up to 30% better germination. SPECIFICATIONS <table style="border:1px solid black;border-collapse:collapse;padding:1px "> Tractor Requirements 35 HP minimum to 60 HP maximum (26.1 kW to 44.7 kW) Drive 540 PTO (tractor) Hitch Category 1 or 2, 3-pt. hitch Weight 1,150 lb (521.6 kg) when hopper is empty Maximum Weight with Full Hopper Approximately 1,250 lb (567 kg) Model 85851 Width 74" (1.88 m) Height 51" (1.3 m) Length 40" (1.02 m) without PTO shaft Capacity 4.77 ft3 (8,251 in3 ) Seed Application Pattern Spacing 1 1/2" (38.1 mm) apart Seeding Width 60" (1.52 m) Seed Gate Manually operated, variable opening Warranty 3 years Ground Speed Up to 5.5 mph (8.85 km/h) Optional Equipment TriWave 3-Point Extension Kit Productivity Up to 3 acres per hour Cutting Heads 3 heads, independently floating Blade Assembly 3 WaveBlade sets, 30 total blades Blade Assembly Operating Depth Range 0 to 1-3/8" (0 to 34.9 mm)

The Turfco Edge-R-Rite® II Bed Edger offers the ultimate in edging versatility. Now you can tackle a wider variety of on-site edging and cutting jobs with one machine. Features easy-to-reach depth-adjusting lever and traction-assist drive. With the Edge-R-Rite, you can save hours of manual labor and beautify your property with clean-edged cart paths, walkways, and landscaping. OVERVIEW The Edge-R-Rite® II is an edger that offers increased versatility to tackle a wide variety of on-site edging and cutting jobs. It can eliminate hours of back-grinding, manual labor when cutting out flower beds, tree rings, edging cart paths, walkways, or landscaping. Oscillating blade action makes the Edge-R-Rite II unique when compared to traditional rotary edgers. The Edge-R-Rite II cuts without throwing debris, so clean-up is easier and operation of the machine is safer in high-traffic areas. Plus, the blades are highly durable, easy to replace and offer a wide variety of options. Commercial-duty durability is built into every Edge-R-Rite II, with features including a solid steel frame, Honda® 4-horsepower engine, heavy-duty cutting arm, and large sealed bearings. It's the edger that lasts. KEY FEATURES Unique blade action cuts like a sod cutter without throwing debris. Heavy-duty arm and rugged design provide years of productivity. Eliminate shovel work for flowerbeds or edging installation. Easy clean-up. Blade outlasts rotary edger blade 20:1. Safer than a rotary edger. Two-year warranty. SPECIFICATIONS <table style="border:1px solid black;border-collapse:collapse;padding:1px "> Model Edge-R-Rite II Bed Edger, #85304 Engine 4 HP Honda® Controls Easy to reach, depth-adjusting lever (1"-4") Traction Assist Drive Pinion drive on gear tread tire; controlled from handlebar Tires Three semi-pneumatic tires; heavy-duty 8" x 1 3/4" Blade Right angle blade standard; other options available (at additional cost, see accessories) Weight 105 lbs. Dimensions 20" W x 36" H x 45" L

Cutting sod has never been faster (or easier). The KisCutter™ is the most maneuverable, easy-to-use sod cutter available. With it's revolutionary lightweight design (only 140 lbs), it cuts up to 9,000 square feet per hour, making it as productive as heavier 300-pound unit. OVERVIEW The Turfco KisCutter™ is lightweight and easy to haul, making it ideal for a variety of sod cutting jobs from sculpting lawns and flower beds, to trimming ball fields. The innovative four-wheel design with pneumatic tires and variable speed rear-wheel friction drive provide excellent maneuverability on virtually any terrain, along with the ability to cut up to 9,000 square feet per hour. Simplified controls are easy to understand and use – just set your depth and go. At just 140 lbs., including a handle that easily folds down to a height of less than 32-inches, the KisCutter™ is also the easiest commercial- duty sod cutter on the market to transport. KEY FEATURES Four-wheel design, pneumatic tires and rear-wheel drive make this the most maneuverable, easy-to-use sod cutter on the market. Lower vibration reduces operator fatigue. Simple, easy-to-use depth adjustment. Optional 9-inch blade available for curbing. Lightweight and foldable handles means easy lifting, hauling and storage. Two-year warranty. SPECIFICATIONS <table style="border:1px solid black;border-collapse:collapse;padding:1px "> Engine 5.5 HP Honda® Model 85530 Cutting Speed Up to 150 feet per minute Cutting Rate Up to 9,000 square feet per hour Cutting Depth Adjustable, with stops at 1" and 1 3/4" Cutting Width 12" (optional 9" blade available for purchase, see accessories) Drive Clutch-driven V-belt Clutch Centrifugal clutch Blade Heat-treated steel Wheels 10" x 4 1/2" pneumatic tires Width 23" across handlebar Height 43" to top of throttle lever; 33" in handle down position Length 36" from front to handlebar; 33" in handle down position Maximum Angle Of Operation 15 degrees Weight 140 lbs.

The Turfco® Torrent™ 2 Debris Blower takes cleanup to a new level of productivity. Whether you're blowing grass clippings, leaves, aeration cores, clearing your cart paths or any other tasks, the Torrent 2 is designed to save you hours in a day. Make sure your operators are working as efficiently as possible with patented MagnaPoint Technology, fast nozzle rotation and patented instant idle down/resume. Rugged and powerful, it's a versatile machine for use year-round. OVERVIEW The powerful, patent-pending Turfco Torrent 2 delivers unprecedented control over air speed, air direction, noise management and fuel consumption. It's designed with a focus on making your staff as productive as possible, freeing you up for other tasks. The Torrent 2 features a faster, more precise nozzle rotation that's operated by a handheld controller to dramatically increase operator productivity. Optional MagnaPoint™ Technology lets you the set the optimal nozzle angle in the shop so your operator is as productive as possible, saving you up to two hours per day. The wireless controller includes a unique idle/resume button, kill switch and the ability to adjust air speed settings. Designed by Turfco, the Torrent 2's turbine generates powerful air volume and superior air velocity. Add the durability you'd expect from Turfco, along with a 2-year warranty, and this blower instantly becomes the workhorse you need. KEY FEATURES Super fast nozzle rotation speed dramatically increases productivity – no need to slow down to wait for the nozzle at the end of each turn. Instantly access power when you want it, or drop down to idle when you don't. Patented instant Idle Down/Resume button saves on fuel consumption and reduces noise. Wireless controller and optional MagnaPoint™ Technology allows operator to dial in the optimal nozzle angle for unprecedented productivity every time. Operators can quickly shut down the engine with the push of a button on the wireless controller. Closed-off deck dramatically reduces debris pickup, decreasing wear on the turbine. Heavy-duty frame, rugged tongue, and adjustable hitch that easily hooks up to your favorite turf vehicles. Powerful 725 cc KOHLER Command PRO ®  engine with electric start and standard Donaldson air cleaner. Powerful air volume & superior velocity, and multiple air speed settings that allow for fast adjustments on the fly. Optional Auxiliary Manual Controls keep you operating if handheld controller gets misplaced. MAXIMIZE PRODUCTIVITY If your operator is even a few degrees off optimal blowing angle, they can waste hours a day. With optional MagnaPoint Technology you can lock-in settings for the most productive angle at every pass. On-board reference lets you select the optimal setting for the debris you are blowing. Slide the magnetic stops to that angle to ensure most efficient operation. TAKE CONTROL The Turfco Torrent 2 comes equipped with a wireless Smart Controller with unique, patented Idle Down/Resume button that lets you instantly access power when you need it, or drop down to idle when you don't, saving on fuel consumption and reducing noise all at the touch of a button. Operators can quickly shut down the engine with the push of a button. POWERFUL AND FAST Super fast nozzle rotation speed dramatically increases productivity – no need to slow down to wait for the nozzle to catch up at the end of each turn. The Torrent 2 is powerful enough to clear just about anything you need to make your course more playable and pristine. Blows aeration cores just as easily as it does grass clippings and leaves. Point the nozzle straight down and clear off cart paths fast and easy. KEEP ON RUNNING An optional auxiliary controller is available that ensures you're always operational. If the wireless controller is ever lost or misplaced, simply flip a switch to control machine speed and direction and keep on going. SPECIFICATIONS <table style="border:1px solid black;border-collapse:collapse;padding:1px "> Model Torrent 2 Debris Blower (#85651) Width (Outside of tire to outside of tire): 48” (1.22 m) Height 43.5" (1.10 m) Length (Hitch to end of chute): 108.8” (2.76 m) Operator Control Wireless Hand-Held Remote Control for nozzle direction, engine speed and engine stop; Optional Auxiliary Manual Controls for engine speed and nozzle control Nozzle Rotation Full 360° in both directions Ground Speed Suggested operating speed: 5 MPH (8 km/h); Maximum non-operation towing speed: 20 MPH (32 km/h) Engine / Models 725 cc (18.65kW) KOHLER Command PRO® with electric start and 15 AMP charging; Donaldson air cleaner standard Electrical Requires 12V DC battery; Electrical circuits for Wireless Remote Control and Nozzle Rotation Motor Tongue and Hitch Adjustable height pin hitch (standard 5/8” pin) Tongue Weight 35 lbs (15.8 Kg) Weight 575 lbs (260.8 Kg) Optional Equipment MagnaPoint Technology (#86504) Auxiliary Manual Controls (#85651)