Filter Sort
close
28 - 36 of 38
Sweep Star V72 Power Take-Off Sweeper

Sweep Star V72 Power Take-Off Sweeper

Sweep Star V72 PTO Sweeper

Special Feature Combination verticut/sweeper head allowing single-pass application. More Productive 7 cubic yard (5.8 cubic meter) easy-empty debris hopper and 72″ sweeper head. Vacuum Mechanical drive vacuum impeller, hydraulic drive sweeper head and verticut reels. Choice Of Sweeper Heads Rubber finger reel or combination rubber-finger verticut reel. Specifications Models 72-000 Sweep Star V72 PTO (Big Vac) Power 540-RPM Tractor PTO Input (Minimum 40hp) Dual constant Velocity drive shaft from tractor to Big Vac 5 V-Belt drive to vacuum fan Multiple V-belt drive to hydraulic pump 1 1/2″ dia. hardened steel blower drive shaft 1 1/2″ dia. hardened steel jackshaft Hydraulic power to drive motors on Sweeper-Vac head Hydraulic fluid capacity: 17 gallons Remote lubrication system Minimum 35 hp for Sweep only) operation Minimum 45 hp for Sweep and verti-cut operation Configuration 72″ Self contained, two-wheel, pull-type combination sweeper and vacuum for turf and other surfaces. Pulls behind appropriate tow vehicle Debris Hopper Capacity – 7 cubic yard Construction – Steel framework Tapered front to back for easy dumping Dump – Hydraulic raise/lower of tailgate. Hopper tailgate open/close via the mounting arm configuration. Sweeper Head Requires one of the following: 72-001 COMBINATION VERTICUT AND SWEEPER HEAD: L-78″, W- 39″, H-18″ Steel and scalp roller VERTI-CUT REEL 72″ wide Hydraulic driven from main pump to drive motor 72 hardened steel flail knives for verti-cutting SWEEPER REEL 72″ wide Hydraulic driven from main pump to drive motor 4 rows of 6″ long fingers, 24 fingers per row using roller and caster adjustments (4) adjustable caster wheels 12-600×6 pneumatic 72-002 RUBBER FINGER SWEEPER HEAD L-78″, W-18″-Height-18″ Sweeper Reel 72″ wide Hydraulic driven from main pump to drive motor 4 rows of 6″ long fingers, 24 fingers per row using caster adjustments (4) adjustable caster wheels 12-600×6 pneumatic 72-005 BRUSH REEL SWEEPER HEAD L-78″, W-18",-Height-18″ Sweeper Reel 72″ wide Hydraulic driven from main pump to drive motor (4) adjustable caster wheels 12-600×6 pneumatic Vacuum System 34″ diameter, 8 blade vacuum fan High strength steel vacuum fan housing with replaceable wear-resistant liner Clean-out hatch on fan housing connected to sweeper head with flexible air tunnel to remove debris from ground surface and deposit into debris hopper. Drive PTO drives hydraulic pump to power sweeper head and Hydraulic motor. PTO Belt drives vacuum impeller Speed Dependent on tow vehicle. Braking Relies on tow vehicles brakes. Optional: Surge Hydraulic brake package Construction Hydraulically formed, electrically welded heavy wall steel tubing. Tires & Wheels (2) 26.5-1400×12 Fairway type turf tires Controls Hydraulic raise/lower of sweeping mechanism head assembly. Electric (toggle switch) engage of vacuum impeller Sound Level 92 dbA Dimensions Length: 180" | Width: 84" | Height: 87" Weight 3500 lbs. Liquid Capacities Hydraulic System Oil: 17 gallons in steel tank Safety Fire extinguisher. Complies with all applicable ANSI, OSHA and European Machinery Directive Standards. Options 72-003 25 ft Hand-Held Vacuum Hose with Suction Nozzle | 72-004 (factory installed) Hwy package. Hwy tires, surge brakes, tail lights
View Details
Sweep Star V72E Sweeper

Sweep Star V72E Sweeper

Sweep Star V72E Sweeper

Sweeper And Vacuum Mechanical drive vacuum impeller and hydraulic drive 72” sweeper head. Big Capacity Large 7 cubic yard easy-to-empty, easy -to-clean hopper. Power 35 hp twin cylinder Vanguard gasoline engine. Choice of Sweeper Heads Rubber finger reel or combination rubber-finger verticut reel. Specifications Models 73-000 Sweep Star V72E (Big Vac) Power 35 hp Twin Cylinder, OHV air cooled gasoline engine with Donaldson intake filtration, Full pressure lubrication system. Configuration 72″ Self contained, two-wheel, pull-type combination sweeper and vacuum for turf and other surfaces. Pulls behind appropriate tow vehicle. Debris Hopper Capacity – 7 cubic yard | Construction – Steel framework Tapered front to back for easy dumping. Air exhaust vents built into top of debris blower | Dump – Hydraulic raise/lower of tailgate. Hopper tailgate open/close via the mounting arm configuration. Sweeper Head 72-002 RUBBER FINGER SWEEPER HEAD L-78″, W-18″-Height-18″ Sweeper Reel 72″ wide Hydraulic driven from main pump to drive motor 4 rows of 6″ long fingers, 24 fingers per row using caster adjustments (4) adjustable caster wheels 12-600×6 pneumatic 72-005 BRUSH REEL SWEEPER HEAD L-78″, W-18″,-Height-18″, Sweeper Reel 72″ wide Hydraulic driven from main pump to drive motor (4) adjustable caster wheels 12-600×6 pneumatic Tow Hitch Options Requires on of 73-004, 73-005, OR 73-003 73-004 5th Wheel hitch for use with Textron vehicles equipped with 5th wheel hitch device and trailer brake option. 73-005 5th Wheel hitch for use with tractor 3-point hitch (Min 35 hp tractor) 73-005 5th Wheel hitch for use with tractor 3-point hitch (Min 35 hp tractor) Vacuum System 22 in diameter x 7 in. wide, 1/4”, balanced, high strength. Abrasion-resistant impeller, 3800 CFM displacement, operating inside high strength steel housing With wear-resistant, replaceable liner, large clean outdoor and drain plug. Connected to sweeper head with flexible air tunnel to remove debris from ground surface and deposit into debris hopper Drive Engine drives hydraulic pump to power sweeper head and hydraulic motor. Belt drives vacuum impeller through electric clutch Speed Dependent on tow vehicle. Braking Relies on tow vehicles brakes. Electric brakes optional, require the use of 73-004 5th wheel hitch connected to Jacobsen Turf Truckster, which is equipped with 5th wheel hitch option and electric trailer brake option Construction Hydraulically formed, electrically welded heavy wall steel tubing. Tires & Wheels (2) 26.5-1400×12 Fairway type turf tires Controls Hydraulic raise/lower of sweeping mechanism head assembly. Electric (toggle switch) engage of vacuum impeller. Increase/decrease engine speed. Remote engine start. Electrical 12-volt, electronic key start Sound Level 98 dbA Dimensions Length: 180" | Width: 84" | Height: 87" Weight 2950 lbs. Liquid Capacities Gasoline: 5 Gallons in high density nylon low-perm tank Hydraulic System Oil: 3.2 gallons in high density polyethylene tank Safety Fire extinguisher. Complies with all applicable ANSI, OSHA and European Machinery Directive Standards. Options 73-006 25 ft Hand-Held Vacuum Hose
View Details
Tournament Ultra 7580 Greensroller

Tournament Ultra 7580 Greensroller

Tournament Ultra 7580 Greensroller

Specifications ENGINE Power 16 HP Briggs Vanguard gasoline engine, two-cylinder, air-cooled, electronic ignition, full pressure lubrication system with replaceable filter, cast iron cylinder sleeves, engine mounted air filter. Drive Direct drive hydraulic motors eliminate the maintenance required on mechanical drive systems. Configuration A gasoline engine powered, hydraulic drive, riding golf course greens roller. Hydraulic dual roller drive system for superior traction and safety.   SPEED Infinitely variable 0 – 10 mph   BRAKES AND STEERING Braking Dynamic thru hydrostatic drive system Steering Mechanical chain/sprocket, 16” automotive type steering wheel   GREENSROLLER Construction Heavy gauge square steel tubing main frame, hydraulically formed, electrically welded Rollers Two (2) oscillating 8” x 36” length, seamless, drawn over mandrel steel tubes. Bolted hubs with bearings on each end of the rollers. Controls Keyed ignition switch, engine throttle, choke at the operator’s station. Dual drive pedals control left / right operation and rolling speed. Pedals connected to hydraulic pump via fully sealed push / pull cable system Ground Pressure 3.86 PSI Seat High back, one piece for operator comfort Electrical System 12 volt system, electric start to engine Sound Level 72 dbA under normal operating conditions Battery 12 volt Safety Dual drive roller system for superior traction and safe operation in all turf and terrain conditions. Dynamic braking thru hydrostatic drive system. Transport Trailer Low profile design with drop axle rated at 2500 lb. capacity. Extra-wide expended metal bed and tailgate fitted with rubber matting for traction and an adjustable centering guide system for easy “ load / unload “ of the roller.Width – 56”, Length – 47” tailgate “up”, not including drawbar, Weight – 240 lbs., Drawbar – adjustable from 44” to 47”, Tires – 18 -9.50×8 pneumatic Warranty Smithco two (2) year limited warranty Briggs & Stratton two (2) year engine manufacturer warranty   WEIGHTS AND DIMENSIONS Length 44" Width 45" Height 49" Weight 895 lbs Liquid Capacities Five (5) gallon fuel tank, three (3) gallon hydraulic oil tank   OPTIONS Light Kit 750-450 Greens Spiker Attachment Model 7512
View Details
Tournament Ultra 7590 Greensroller

Tournament Ultra 7590 Greensroller

Tournament Ultra 7590 Greensroller

Specifications ENGINE Power 16 HP Briggs Vanguard gasoline engine, two cylinder, air-cooled, electronic ignition, full pressure lubrication system with replaceable filter, cast iron cylinder sleeves, engine mounted air filter. Configuration A gasoline engine powered, hydraulic drive, riding golf course greens roller. Hydraulic dual roller drive system for superior traction and safety. Drive Direct drive hydraulic motors eliminate the maintenance required on mechanical drive systems.   SPEED Infinitely variable 0 – 9 mph   BRAKES AND STEERING Braking Dynamic thru hydrostatic drive system Steering Hydraulic power steering   GREENSROLLER Construction Heavy gauge square steel tubing main frame, hydraulically formed, electrically welded Rollers Two (2) oscillating 8” diameter x 36" length, seamless, drawn over mandrel steel tubes. Beveled on both ends with roller scrapers. Bolted hubs with bearings on each end of both rollers. Controls Keyed ignition switch, engine throttle, choke at the operator’s station. Dual drive pedals control left / right operation and rolling speed. Pedals connected to hydraulic pump via fully sealed push / pull cable system Ground Pressure 3.86 PSI Seat High back, one piece for operator comfort Electrical System 12 volt system, electric start to engine Sound Level 72 dbA under normal operating conditions Battery 12 volt Safety Dual drive roller system for superior traction and safe operation in all turf and terrain conditions. Dynamic braking thru hydrostatic drive system. Transport Trailer Low profile design with drop axle rated at 2500 lb. capacity. Extra wide expended metal bed and tailgate fitted with rubber matting for traction and an adjustable centering guide system for easy “ load / unload “ of the roller.Width – 56”, Length – 47” tailgate “up”, not including drawbar, Weight – 240 lbs., Drawbar – adjustable from 44” to 47”, Tires – 18-9.50×8 pneumatic Warranty Smithco two (2) year limited warranty Briggs & Stratton two (2) year engine manufacturer warranty   WEIGHTS AND DIMENSIONS Length 44" Width 45" Height 49" Weight 845 lbs Liquid Capacities Five (5) gallon, three (3) gallon hydraulic oil tank   OPTIONS Light Kit 750-450 Greens Spiker Attachment Model 7512
View Details
Tournament Ultra Lite 7576 Greensroller

Tournament Ultra Lite 7576 Greensroller

Tournament Ultra Lite 7576 Greensroller

ENGINE Engine 9 HP Honda Model#: GX270UT2QA2 Commercial gasoline engine, single-cylinder, air-cooled. Engine mounted air cleaner. Drive Direct drive hydraulic motors eliminate the maintenance required on mechanical drive systems.   SPEED Infinitely variable 0 – 9 mph   BRAKES AND STEERING Braking Dynamic thru hydrostatic drive system Steering Mechanical chain/sprocket, 16" automotive type steering wheel   GREENSROLLER Construction Heavy gauge square steel tubing mainframe, hydraulically formed, electrically welded. Rollers Two (2) oscillating 8” x 36” length, seamless, drawn over mandrel steel tubes. Bolted hubs with bearings on each end of the rollers. Controls Electric start, engine throttle, choke and fuel on/off on the engine. Dual drive pedals control left / right operation and rolling speed. Pedals connected to hydraulic pump via mechanical linkage. Ground Pressure 3.35 PSI Seat High back, one piece for operator comfort Electrical System 12-volt system available from the engine while running, no battery Sound Level 90 dbA under normal operating conditions Fuel Tank 1-gallon engine mounted Oil Tank 1-gallon hydraulic oil tank Warranty Smithco two (2) year limited warranty Briggs & Stratton two (2) year engine manufacturer warranty   WEIGHTS AND DIMENSIONS Length 52" Width 49" Height 47" Weight 625 lbs   OPTIONS Light Kit 750-555 Brush Kit 7514
View Details
Tournament XL 7000 Ultra Wide Greensroller

Tournament XL 7000 Ultra Wide Greensroller

Tournament XL 7000 Ultra Wide Greensroller

More Productive Three articulating rolling heads provide 70” wide rolling area. Reduce your rolling time dramatically. Easy Maintenance Direct drive to rollers eliminates time-consuming chain maintenance. Better Traction Triple hydraulic direct drive to rollers for superior traction. No time-consuming chain maintenance. Specifications ENGINE Power 16 HP Briggs Vanguard gasoline engine, two-cylinder, air-cooled, electronic ignition, full pressure lubrication system with replaceable filter. Configuration A gasoline engine powered, hydraulic drive, riding golf course greens roller. Hydraulic, triple roller drive system for superior traction and safety. Direct drive hydraulic motors to each roller cylinder eliminating the maintenance required on mechanical drive systems. Drive Hydrostatic using a 16cc hydraulic pump driving three (3) hydraulic motors direct coupled to each roller cylinder. Direct drive motors eliminate maintenance, hydraulic drive to all rollers provides superior traction in all turf and terrain conditions. Battery 12 volt   SPEED Infinitely variable 0 – 7 mph   BRAKES AND STEERING Braking Dynamic thru hydrostatic drive system Steering 10:2 Reduction; 16 soft grip steering wheel with tilt: 10 diameter turning radius; hydraulic power steering   GREENSROLLER Construction Heavy gauge square steel tubing main frame, hydraulically formed, electrically welded Rollers Two 8” diameter x 19” length and one 8 diameter x 36 seamless rollers. Controls Keyed ignition switch, engine throttle, choke at the operator’s station. Dual drive pedals control left / right operation and rolling speed. Pedals connected to hydraulic pump via fully sealed push / pull cable system. Ground Pressure 3.81 PSI with 175 lb. operator on fine turf. Seat High back, one piece for operator comfort Electrical 12 volt system, electric start to engine Sound Level 72 dbA under normal operating conditions Safety Triple drive roller system for superior traction and safe operation in all turf and terrain conditions. Dynamic braking thru hydrostat drive system. Trailer 7525 HD Transport Trailer with Clevis hitch Warranty Smithco two (2) year limited warranty Briggs & Stratton two (2) year engine manufacturer warranty   WEIGHTS AND DIMENSIONS Length 48" Width 73" Height 47" Weight 905 lbs Liquid Capacities Five (5) gallon fuel tank, Three (3) gallon hydraulic oil tank   OPTIONS Brush Kit 7513 Light Kit 750-450 Ball Hitch 750-435-1
View Details
Verti-Drain® 1513

Verti-Drain® 1513

111.215.013

The lightweight Verti-Drain® 1513 can work to a depth of 6” / 150mm and is well suited to sensitive turf surfaces. The belt driven machine operates a high speed while giving a neat and consistent hole pattern. An optional rear roller can be added to smooth the surface and leave a neat finish. High-speed machine Lightweight machine with low HP requirements Integrated parking stands for ease of operation Specifications SKU 111.215.013 Working width (m) 1.32 Working width (inch) 52 Max. Working depth (mm) 150 Max. Working depth (inch) 6 Working speed at hole spacing 65 mm (km h) 2.12 Working speed at hole spacing 2 1 2 inch (mph) 1.3 Weight (kg) 448 Weight (lbs) 985 Hole distance with 12 mm tines (mm) 55 Hole distance with 1 2 x 6 inch tines (inch) 2.17 Hole spacing distance driving direction (mm) 25 - 125 Hole spacing distance driving direction (inch) 1-7.5 Max. Diameter solid tine (mm) 12 x 150 Max. Diameter solid tine (inch) 1/2 x 6 Max. Diameter hollow tine (mm) 19 x 150 Max. Diameter hollow tine (inch) 3/4 x 6 Min. Tractor HP required 25 Min. Lifting capacity 610 mm behind the lifting eyes (kg) 500 Min. Lifting capacity 24 inch behind the lifting eyes (lbs) 1102 Max. capacity with spacing 65 mm (m² hr) 2822 Max. capacity with spacing 2 1 2 inch (ft² hr) 30374 Three-point hitch 3-point CAT 1 Rpm Max. 540 Gearbox oil 80W90 - 0.9L Lubricant EP 2 Dimensions (width mm) 970 Dimensions (height mm) 780 Dimensions (length mm) 1610 Dimensions (width inch) 38.2 Dimensions (height inch) 30.7 Dimensions (length inch) 63.4 Standard Components Description Quantity Toolbox with combi tool and manual 1 PTO Shaft 1 Storage Legs 1 Solid Tine 12x150mm (1/2x6") 24
View Details
Pro-Flex 120

Pro-Flex 120

Pro-Flex 120

Overview The Pro-Flex 120 is the most widely used pull-behind contour finishing mower. It has become the 'go-to' contour and rough mower due to its reliability, a 10' wide cut, and its versatility. With 5 independent floating decks, the Pro-Flex 120 will easily follow contour changes that are found on golf courses and campuses, producing a uniform quality cut that is demanded by Superintendents and members alike. The Pro-Flex 120 has several standard features that are important on a pull-behind contour mower, but are only available from Progressive! Utilizing the tractor for other tasks is a key advantage so we made connecting a Pro-Flex 120 to the tractor easy, thanks to an adjustable clevis, a low tongue weight, and an auto-lock PTO shaft. Originally introduced in 1999, the Pro-Flex 120 is well known as a durable, reliable rotary finishing mower that is now easier to maintain than ever before. The Pro-Flex 120 is “The Better Built Choice”. Benefits Contour Mowing Ultimate contour following due to five independent decks, allowing for a world-class cut and excellent clipping dispersal.   Ideal for Making a Stepped or a Transition First-Cut Being able to quickly and easily set each individual deck height gives the opportunity to do two jobs in one pass!   Pro Lift-N-Turn™ An industry exclusive feature – not found on other contour mowers! Pro Lift-N turn™ allows the decks to be raised slightly off the ground with the PTO still engaged. Crossing a cart path or other minor obstacles has never been easier.   Smart by Design Innovative designs only found on Progressive mowers, help their customers do more in less time and at less cost!   Easy Routine Maintenance Progressive's goal is to keep their customers mowing and not spend time performing routine maintenance. Reducing the number of grease points and using extended service interval PTO shafts are but two of the ways we minimize maintenance time and cost. Part Number: 601205 (Red) or 602711 (Green) (North America) / 601205D (Red) or 602711 (Green) (Worldwide) Recommended PTO H.P.: 30 to 40 Mowing Capacity (*Assumes no overlap or turning): 4 mph 4.4 acres per hour * 6 mph 6.5 acres per hour * Cut Height Range: 1" - 3 1/4" Cutting Width: 10' Turning Radius: 16" uncut circle Transport Width: 8' 6" Transport Tires: 18.5 X 8.5 - 8 4ply Transport Height: 4' 2" Weight: 2075 lbs Transport Length: 11' Std. Equipment: 5 Independent floating 28”diameter decks to follow all contours. Quick adjust swivel hitch, allows mower to follow contours without interference from tractor. Heavy-duty construction, open rear-discharge with adjustable deflectors. Rubber damped, automatic belt tensioners on all belts. Pro Lift-N-Turn™ allows the operator to temporarily raise the decks slightly off the ground without stopping and with the PTO still engaged. Ideal for crossing cart paths or when engaging the PTO. Puncture proof tires, 10”dia x 4”wide (4 per deck) mounted on greaseable tapered roller bearings. Deck shock absorbers, able to cut at high speeds yet maintain consistent quality cut. Able to cut while backing up, this allows cutting in corners and other hard to reach areas. CV input shaft system for easy connection to any tractor. Maintenance free blade spindle assemblies for reduced maintenance. High lift blades for superior cut. Blade tip Speed 18,600 FPM. Anti-Scalp Rollers on front and back of each deck. Anti-Scalp Skids on both sides of each deck Opt. Equipment: 606501 Mulch Kit complete with mulching blades not installed 606502 Mulch shut off plate kit (No mulch blades included) not installed 600526 Mulch Blade Kit (Four black left hand and one red right hand blades) 600517 High Lift Blade Kit (Four black left hand and one red right hand blades) 600524 Pro-Flex Belt Kit – for the complete mowerMulch Kit complete with mulching blades not installed
View Details
TD65-2

TD65-2

TD65-2

Overview The Progressive TD65-2 is a tri-deck finish mower designed to maintain large areas quickly and economically. With a 12' wide cutting swath, the TD65-2 is capable of mowing over 60 acres in an 8 hour day at speeds up to 6 miles per hour. Three independent floating mower decks mounted on a transport frame follow the ground conditions found in school yards, recreation areas, and corporate campuses. The TD65-2 produces a professional after cut appearance. When you are not mowing, the mower can be quickly disconnected from the tractor, increasing the utilization of the tractor for other tasks. Similarly, reconnection is quick and simple. Now that's value! Progressive designed the TD65-2 mowing deck to assist the even dispersion of clippings through the open rear discharge area - avoiding clumping and windrows. Only minutes are required to change the TD65-2 cutting height from 1" to 5" without the use of tools. For convenience and safety, all transport and mowing functions are activated without the operator leaving the tractor's seat. Optional transport tires and fenders are available if the mower needs to be towed longer distances. Overall Hook-Up Made Easy: Knowing your tractor may be used for other tasks, we made the connection process simple.   Easy to Transport and Maintain Progressive has made your uptime our passion. Always pushing the envelope with innovative options that keeps the end user in the field longer.   A Superior Cut for a Superior Finish The selection of blade for your mower is critical. Progressive has different options of blades to suit all different needs.   Cut More in a Shorter Amount of Time With a 12ft cutting width, the TD65-2 is able to cut in 8.7 acres of grass an hour.   Ease Of Maintenace Incorporating designs that are field proven and components that are used on much larger mowers – up to 36’ wide, Specifications Part Number: 526512B (North America) 526512D (Worldwide) Recommended PTO H.P.: 25 to 40 Mowing Capacity: * (Assumes no overlap or turning) 2 mph 2.9 acres per hour * 4 mph 5.8 acres per hour * 6 mph 8.7 acres per hour * Cut Height Range: 1" to 5" Cutting Width: 12' Turning Radius: 24" uncut circle Transport Width: 7' 6" Transport Tires: 18 X 9.50 X 8 NHS, 6 ply, Turf Saver Tires Transport Height: 5' 6" Weight: 2380 lbs Transport Length: 14' Opt. Equipment: 522311 Heavy Duty Transport Tires (in lieu of standard tire factory installed) 521811 Spare - Heavy Duty Transport Tire (20.5 x 8 -4 ply) (must order 2 if replacing standard tire – requires corner pin p/n 521811) 522604 High Lift Blade Kit (replacement set of 7 fixed black blades) 522607 Low Lift Blade Kit (replacement set of 7 fixed blades) 522506 Mulching Kit – (Requires 522612 Mulch Blade Kit) not installed 522612 Mulch Blade Kit (set of 7 blades)
View Details
28 - 36 of 38