Progressive Turf Equipment, Turfco, Hustler, TriArc, Precision Tank, Wessex, GSI InterSystems - Simonsen

Overview The Progressive SDR-65 is a three point hitch version of the popular tri-deck TDR-15 mower and it utilizes many of the same components. Not to be confused with other, light duty three point hitch mowers that are available, the SDR-65 has a 6” diameter rollers on both the front and rear across the full width of the deck. Ideal for smaller mowing jobs where a quality cut is mandatory, the SDR’s rollers allow you to cut as low as ½”, while simultaneously striping and rolling the mowing surface. To minimize service requirements, the SDR-65 is equipped with field proven maintenance free blade spindles. Progressive’s SDR-65 mower is another example of the ingenuity and quality that goes in to producing a durable, reliable rotary finishing mower that is easy to maintain. It shows once again why the SDR-65 is “The Better Built Choice”. Benefits Easy Height Adjustment Infinite cutting height adjustment from ½” to 4”.   Full Width Rollers The rollers will stripe the turf, leaving a pleasing visual impact for the facilities patrons – a testament to the professionalism of the job.   High Blade Tip Speed Progressive’s high tip speed provides a clean even cut at ground speeds up to 6 miles per hour for the high productivity users have come to appreciate from a Progressive mower.   Simpler Maintenance = Lower Cost Maintenance Free Blade Spindles and sealed roller-end bearings are used to lower both the cost and time spent on routine maintenance. Specifications Part Number: 531965 (North America) 531965C (Worldwide) Recommended PTO H.P.: 25 Mowing Capacity (*Assumes no overlap or turning): 2 mph 1.25 acres per hour* 4 mph 2.5 acres per hour* 6 mph 3.75 acres per hour* Cut Height Range: 1/2" tp 4" Cutting Width: 65" Transport Width: 72" Weight: 975 lbs Std. Equipment: Heavy-duty construction, open rear discharge, easy cutting height adjustment. Heavy duty 6” dia. rollers supported by 2 - 1.25” ductile flange HEX bearings Maintenance free blade spindle assemblies for reduced maintenance. High lift blades for superior cut. Tip speed 18,287 FPM Opt. Equipment: 522361 23” Low Lift Blade (three required) 522360 23” High Lift Blade (three required)

The Turfco WideSpin™ 1550 was designed to help you achieve your agronomic goals, increase staff productivity and free up your time. With Turfco's patented hydraulic system and spinner design, along with our Smart Controller, you can be confident you're getting the application you want every time. Reduce up to 720 passes per year and minimize turf traffic to achieve the most playable, beautiful golf course. OVERVIEW The Turfco Edge started with listening to what frustrates superintendents when it comes to topdressing. We heard they were tired of doing wheel-to-wheel spreads, overlapping spreads, dealing with complicated mechanical adjustments, and wasting time checking in with their crews to verify spread settings. The WideSpin™ 1550 solves these problems, and more. Calculating and knowing your rates is easier. Adjusting settings is easier. Saving preferred settings is easier. Loading is easier. Topdressing greens, approaches and tees at the same time is easier. And getting the exact spread you want, every time, is easier. Our unique design makes it easy to get whatever width and rate you want, without having to do mechanical adjustments. You can save your preferred applications into four programmable presets, changing widths and rates on the fly, increasing productivity, eliminating guesswork and freeing up your time. WideSpin 1550 topdressers are available in truck-mounted and tow-behind models with engine or hydraulic power options. You can choose between Standard Electronic Control or upgrade to our patented digital Smart Controller. Standard Electronic Control models are easy to use and offer good value for the money. Smart Controller models offer rate calculation and programmable presets for greatest productivity and labor savings. KEY FEATURES Get the exact spread you want as you move from greens to approaches to tees, at the push of a button. Know your application rates, and determine how much material you need to budget — all for the first time ever with our on-board calculator. Reduce the number of passes and decrease traffic on your greens with WideSpin edge-to-edge applications. Drive topdressing down into the turf canopy by adjusting the spinner angle, minimizing the need for brushing and eliminating variations in spread due to moisture content (spreads the same wet or dry). Refill the hopper faster and with less spillage – galvanized hopper has 20% greater capacity and wide opening fits an 80" bucket. Three year warranty BEST SPREAD IN THE INDUSTRY For the first time ever, you can set up and save your applications one time — then get your perfect spread every time. With Turfco’s patented technologies, you can reduce greens passes, minimize turf traffic, and get a more consistent spread. REDUCED PASSES Save time and reduce wear on your greens with Turfco's patented WideSpin™ edge-to-edge technology. Decrease the number of passes on your greens by up to 720 times per year* as compared to the wheel-to-wheel method. Improve productivity and save time; unique 30-foot wide, even spread makes it possible to cover an average-size green in just two passes. Dramatically reduce traffic on your greens, reducing the potential for soil compaction and hydraulic leaks. *18 greens, 10 times a year. CALCULATE AND LOCK-IN PREFERRED APPLICATIONS Know your application rates, calculate the rates you want, and determine how much material you need to budget with our on-board calculator. Smart Controller lets you save your preferred applications into four programmable presets, allowing you to switch between widths and rates as you move from greens to approaches to tees at the push of a button. ADJUSTABLE SPINNER Drive topdressing down into the turf canopy by adjusting the spinner angle, minimizing the need for brushing and eliminating variations in moisture content (spreads the same wet or dry). LARGE HOPPER Large, galvanized steel hopper has increased capacity and is wider, making it easier to fill and less often! Refill the hopper faster and with less spillage — has 20% greater capacity and wider opening fits an 80” bucket. SPECIFICATIONS                                Model Tow-Behind 1550 Models: Engine-powered w/Smart Control (#85828); Engine-powered w/ Standard Electronic Control (#85829); Hydraulic-powered w/Smart Control (#85824); Hydraulic-powered w/Standard Electronic Control (#85825) Warranty 3 Years Engine / Models 13 HP Briggs and Stratton (engine-powered models only) Operator Control SMART: 3-position switch; 4 programmable presets; onboard rate calculator; instantaneous belt and spinner speed control; instant throttle down control (engine powered)      STANDARD Electronic: Standard 3-position switch with manual control for spinner and belt speed Weight Tow-Behind Models: Engine-powered: 1,324 lbs (601 kg);  Hydraulic-powered: 1,021 lbs (463 kg) Truck-Mounted Models: 710 lbs w/o mounting (322 Kg) Hopper Capacity 21 ft3 (0.59 m3) struck level; 25 ft3 (0.71 m3) heaped Hopper Size 80" x 36.5" (2.03 x 0.92 m) at the top Spreading Width 12' up to 40' (2.7 up to 12 m) Spread Application 0.45 ft3 per 1,000 ft3 up to 12 ft3 per 1,000 ft3 Ground Speed Up to 8 MPH (12.8 km/h) Conveyor Belt 18" (0.46 m) wide pebble surface composition with heavy-duty polyester cord Metering Gate Manually operated with Light Spread/Heavy Spread Calibrations Drive Engine Powered: Engine powered Hydraulics / Hydraulic Powered: Tow vehicle powered hydraulics Wheels 4 Ply 26.5 x 14.00 x 12 Turf (tow-behind model)

The Turfco WideSpin™ 1550 (Truck-Mounted model) was designed to help you achieve your agronomic goals, increase staff productivity and free up your time. With Turfco's patented hydraulic system and spinner design, along with our Smart Controller, you can be confident you're getting the application you want every time. Reduce up to 720 passes per year and minimize turf traffic to achieve the most playable, beautiful golf course OVERVIEW The Turfco Edge started with listening to what frustrates superintendents when it comes to topdressing. We heard they were tired of doing wheel-to-wheel spreads, overlapping spreads, dealing with complicated mechanical adjustments, and wasting time checking in with their crews to verify spread settings. The WideSpin™ 1550 solves these problems, and more. Calculating and knowing your rates is easier. Adjusting settings is easier. Saving preferred settings is easier. Loading is easier. Topdressing greens, approaches and tees at the same time is easier. And getting the exact spread you want, every time, is easier. Our unique design makes it easy to get whatever width and rate you want, without having to do mechanical adjustments. You can save your preferred applications into four programmable presets, changing widths and rates on the fly, increasing productivity, eliminating guesswork and freeing up your time. WideSpin 1550 Topdressers truck-mounted model was designed to fit all major turf vehicles. You can choose between Standard Electronic Control or upgrade to our patented digital Smart Controller. Standard Electronic Control models are easy to use and offer good value for the money. Smart Controller models offer rate calculation and programmable presets for greatest productivity and labor savings. KEY FEATURES Truck-mounted option with patented hydraulic system and spinner design fits all major turf vehicles. Get the exact spread you want as you move from greens to approaches to tees, at the push of a button. Know your application rates, and determine how much material you need to budget — all for the first time ever with our on-board calculator. Reduce the number of passes and decrease traffic on your greens with WideSpin edge-to-edge applications. Drive topdressing down into the turf canopy by adjusting the spinner angle, minimizing the need for brushing and eliminating variations in spread due to moisture content (spreads the same wet or dry). Refill the hopper faster and with less spillage – galvanized hopper has 20% greater capacity and wide opening fits an 80" bucket. Three year warranty BEST SPREAD IN THE INDUSTRY For the first time ever, you can set up and save your applications one time — then get your perfect spread every time. With Turfco’s patented technologies, you can reduce greens passes, minimize turf traffic, and get a more consistent spread. REDUCED PASSES Save time and reduce wear on your greens with Turfco's patented WideSpin™ edge-to-edge technology. Decrease the number of passes on your greens by up to 720 times per year* as compared to the wheel-to-wheel method. Improve productivity and save time; unique 30-foot wide, even spread makes it possible to cover an average-size green in just two passes. Dramatically reduce traffic on your greens, reducing the potential for soil compaction and hydraulic leaks. *18 greens, 10 times a year. CALCULATE YOUR SPREAD Know your application rates, calculate the rates you want, and determine how much material you need to budget with our on-board calculator. Smart Controller lets you save your preferred applications into four programmable presets, allowing you to switch between widths and rates as you move from greens to approaches to tees at the push of a button. ADJUSTABLE SPINNER Drive topdressing down into the turf canopy by adjusting the spinner angle, minimizing the need for brushing and eliminating variations in moisture content (spreads the same wet or dry). LARGER HOPPER Large, galvanized steel hopper has increased capacity and is wider, making it easier to fill and less often! Refill the hopper faster and with less spillage — has 20% greater capacity and wider opening fits an 80” bucket. SPECIFICATIONS <table style="border:1px solid black;border-collapse:collapse;padding:1px "> Model Hydraulic Powered (Toro, John Deere & Jacobsen); 1550 Smart Control (#85822) or 1550 Standard Electronic Control (#85823) Operator Control Smart: 3-position switch; 4 programmable presets; onboard rate calculator; instantaneous belt and spinner speed control - Standard Electronic: Standard 3-position switch with manual control for spinner and belt speed Weight 710 lbs without mounting kit (322 Kg) - Empty Weight Hopper Capacity 21 ft3 (0.59 m3) struck level; 25 ft3 (0.71 m3) heaped Hopper Size 80" x 36.5" (2.03 x 0.92 m) at the top Spreading Width 12' up to 40' (2.7 up to 12 m) Spread Application 0.45 ft3 per 1,000 ft3 up to 12 ft3 per 1,000 ft3 using patented WideSpin Technology Ground Speed Up to 8 MPH (12.8 km/h) Conveyor Belt 18" (0.46 m) wide pebble surface composition with heavy-duty polyester cord Metering Gate Manually operated with Light Spread/Heavy Spread Calibrations Drive Truck Powered Hydraulics Warranty 3 Years

Mete-R-Matic®, the best-known brand in topdressing, sets the standard for uniform application. The Mete-R-Matic IV is the ideal choice for golf greens, tees, driving ranges and sports fields. The patented Chevron® belt guarantees a uniform application of all types of materials regardless of moisture content. The patented ground drive system means that you're always getting a consistent rate regardless of how fast or slow the operator drives. No hydraulics, no pumps, no engines. Just set your application rate and go. OVERVIEW The Mete-R-Matic ®  IV featuring a patented Chevron ®  belt, is the first and only topdresser to ensure uniform application of all types of materials and varying levels of moisture content, including wet sand. Perfect for after aerification. You can consistently apply a wide variety of topdressing mixtures such as sand, organic compost, peat humus, and rye grass, as well as crumb rubbers, gypsum, lime and calcine clays. Ideal for golf greens, cultured grasses and other areas sensitive to weight, this topdresser utilizes an eco-friendly, patented ground-drive system. When you speed up, slow down or cross uneven terrain, the conveyor belt and brush automatically adjust at the same rate to provide a consistent and even application every time. No hydraulics, no pumps and no engines. Just hook up and go. A wide, galvanized hopper won't rust or flake and is easily loaded with the Turfco CR-15 or other front-end loader. Easily towed by turf truck vehicles, the Mete-R-Matic IV is designed to handle any topdressing program. KEY FEATURES Patented ground drive system means that you're always getting a consistent rate regardless of how fast or slow the operator drives. Eco-friendly ground drive - no hydraulics, pumps or engine. Patented Chevron is the first and only belt to ensure uniform application of all types of materials with varying levels of moisture, including wet sand, organic compost, peat humus, and rye grass, as well as crumb rubbers, gypsum, lime and calcine clays All six wheels drive the machine for consistent application on uneven terrain. Wide hopper design is easily loaded with front-end loader or the Turfco® CR-15. Easily towed by turf truck vehicles. Proven, battle-tested design has been the standard of the industry since 1981. Galvanized hopper (no rusting—or potential rust flakes in topdress material). KEY FEATURES Patented ground drive system means that you're always getting a consistent rate regardless of how fast or slow the operator drives. Eco-friendly ground drive - no hydraulics, pumps or engine. Patented Chevron is the first and only belt to ensure uniform application of all types of materials with varying levels of moisture, including wet sand, organic compost, peat humus, and rye grass, as well as crumb rubbers, gypsum, lime and calcine clays All six wheels drive the machine for consistent application on uneven terrain. Wide hopper design is easily loaded with front-end loader or the Turfco® CR-15. Easily towed by turf truck vehicles. Proven, battle-tested design has been the standard of the industry since 1981. Galvanized hopper (no rusting—or potential rust flakes in topdress material). CONSISTENTLY APPLY WET OR DRY Turfco Mete-R-Matic topdressers, featuring a patented Chevron belt, are the first and only to ensure uniform application of all types of materials and varying levels of moisture content, including wet sand. You can consistently apply a wide variety of topdressing mixtures such as sand, organic and inorganic compost, peat and humus, rye grass, as well as crumb rubbers, gypsum, lime and calcine clays. ECO-FRIENDLY GROUND DRIVE The Mete-R-Matic IV utilizes a patented ground-drive system. When you speed up, slow down or cross uneven terrain, the conveyor belt and brush automatically adjust at the same rate to provide a consistent and event application every single time. No hydraulics, no pumps and no engines. Just hook up and go. TACKLE ANY TOPDRESSING JOB Our one cubic yard hopper with unique half-moon metering gate makes quick work of any topdressing task. Set your rate and know that your operator will get that rate all day long. Easily towed by turf truck vehicles. Simple and intuitive design combined with a three-year warranty guarantees you and your staff can complete your applications with confidence. SPECIFICATIONS Model 85424 Drive Wheels are driven by the ground; all six tires mechanically drive the conveyor and brush; no engine; no hydraulic system Hopper Capacity 1 yd3 (0.76 m3) Hopper Size Top: 73 ½" x 39 3/8" (1.87 m x 1.00 m), Bottom: 60" x 20" (1.5 m x 0.51 m), Depth: 19" (0.48 m) Spreading Width 60" (1.5 m) Topdressing Speed Up to 8 MPH (12.8 km/h) Transport Speed Empty: up to 15 MPH (24 km/h), Loaded: up to 8 MPH (12.8 km/h) Application From very fine to ¼" (6.5 mm) Conveyor Belt Wide rubber composition with patented, Chevron belt 60" (1.5 m) Metering Gate Taintor gate design is easily adjusted and provides a uniform opening up to 2 ¼" (57 mm) Brush 9" (228 mm) diameter, polypropylene bristle Controls Electric clutch actuator to engage conveyor and brush. Metering gate control for depth of application. Clutch The main clutch is a mechanical ratchet design actuated electrically from the operator’s position on the tow vehicle. Wheels & Tires Six, 16" x 6.50" x 8" rib tread turf tires Hitch Heavy-duty pin hitch Empty Weight 882 lb (400 kg) Warranty 3 Years

Mete-R-Matic®, the best-known brand in topdressing, sets the standard for uniform application. The Mete-R-Matic XL with a 2.25 cubic yard hopper is the ideal choice for large turf areas, requiring less reloading and transportation for increased efficiency and productivity. The patented Chevron belt guarantees a uniform application of all types of materials regardless of moisture content. The patented ground drive system means that you're always getting a consistent rate regardless of how fast or slow the operator drives. No hydraulics, no pumps, no engines. Just set your application rate and go. OVERVIEW The Mete-R-Matic® XL is ideal for large turf areas with 2.25 cubic yards, less reloading and transportation.  Featuring a patented Chevron® belt, the Mete-R-Matic series was the first to ensure uniform application of all types of materials and varying levels of moisture content, including wet sand. Perfect for after aerification. You can consistently apply a wide variety of topdressing mixtures such as sand, organic compost, peat humus, and rye grass, as well as crumb rubbers, gypsum, lime and calcine clays. This topdresser utilizes an eco-friendly, patented ground-drive system. When you speed up, slow down or cross uneven terrain, the conveyor belt and brush automatically adjust at the same rate to provide a consistent and even application every time. No hydraulics, no pumps and no engines. Just hook up and go. The large, galvanized hopper won't rust or flake and is easily loaded with the Turfco CR-15 or other front-end loader. The Mete-R-Matic XL is designed to handle any topdressing program. KEY FEATURES 2.25 Cubic yard hopper requiring less transportation and reloading  Patented ground drive system means that you're always getting a consistent rate regardless of how fast or slow the operator drives. Eco-friendly ground drive - no hydraulics, pumps or engine. Patented Chevron belt is the first and only to ensure uniform application of all types of materials with varying levels of moisture, including wet sand. Wide hopper design is easily loaded with front-end loader or the Turfco® CR-15. Proven, battle-tested design has been the standard of the industry since 1981. Galvanized hopper (no rusting—or potential rust flakes in topdress material). 3-Year warranty. CONSISTENTLY APPLY WET OR DRY Turfco Mete-R-Matic topdressers, featuring a patented Chevron ®  belt, are the first and only to ensure uniform application of all types of materials and varying levels of moisture content, including wet sand. You can consistently apply a wide variety of topdressing mixtures such as sand, organic and inorganic compost, peat and humus, rye grass, as well as crumb rubbers, gypsum, lime and calcine clays. ECO-FRIENDLY GROUND DRIVE The Mete-R-Matic XL utilizes a patented ground-drive system. When you speed up, slow down or cross uneven terrain, the conveyor belt and brush automatically adjust at the same rate to provide a consistent and event application every single time. No hydraulics, no pumps and no engines. Just hook up and go. TACKLE ANY TOPDRESSING JOB At 2.25 cubic yards, the Mete-R-Matic XL is ideal for large turf areas, requiring less reloading and increasing transportation efficiency. The larger capacity hopper can easily be filled with a Turfco CR-15  or other front-end loader. Made of galvanized steel, the self-cleaning hopper won't rust or flake. SPECIFICATIONS <table style="border:1px solid black;border-collapse:collapse;padding:1px "> Model 85460 Drive Wheels are driven by the ground; all tires mechanically drive the conveyor and brush; no engine; no hydraulic system Hopper Capacity 60.75 ft3 (1.72 m3; 2.25 yd3), galvanized panels Hopper Size Top: 79" x 65" (2.0 m x 1.7 m), Bottom: 60" x 46" (1.5 m x 1.17 m), Depth: 19" (0.48 m) Payload 6,000 lb (2,721 kg) Spreading Width 60" (1.5 m) Topdressing Speed Up to 8 MPH (12.8 km/h) Transport Speed Up to 8 MPH (12.8 km/h) Conveyor Belt Wide rubber composition with patented Chevron belt 60" (1.5 m) Metering Gate Taintor gate design is easily adjusted and provides a uniform opening up to 2 ¼" (57 mm) Brush 9" (228 mm) diameter, polypropylene bristle Controls Electrically operated clutch for conveyor and brush drive. Metering gate adjusted by hand. Clutch The main clutch is a mechanical ratchet design actuated electrically from the operator’s position on the tow vehicle Wheels & Tires Two, 33" x 15.50" – 16.5" flotation tires Hitch Adjustable height clevis 1" pin hitch Tractor Requirements Minimum of 30 HP (22.4 kW) Empty Weight 2,110 lb (957 kg) Electrical Requirements 12 volt DC, negative ground (electrical power provided by tow vehicle)

The CR-8 is the perfect machine for golf courses needing more capacity for materials but without a larger tractor. New larger capacity 2.0 cubic yard self-cleaning hopper easily handles wet or dry material. Hydraulic controls combined with Turfco's patented WideSpin Technology give you greater control and wider range of applications. Hydraulics are controlled by a patented three-position switch with belt and spinner control and manually adjusted hydraulic speeds, all designed to give the operator maximum control over field operations. OVERVIEW The CR-8 makes topdressing even easier by combining patented technology with built-in versatility. New hydraulic controls, combined with WideSpin™ Technology, give you greater control and a wider range of applications to deliver your most accurate spread from light to heavy, wet or dry, and up to 45-feet wide. Reduce the number of passes and decrease traffic our your turf with even, edge-to-edge applications. The heavy-duty galvanized steel hopper can handle up to 2 cubic foot in capacity, including lime, sand, stone, wood chips, compost, soil conditioners and grass clippings. It's a higher capacity machine in a modestly sized package, right-sized for mounting on smaller tractors equipped with 30-hp or greater engines (for powering hydraulics operations). In action, the CR-8 is rated for top speed operation at 8 mph, which means it can cover a lot of ground in a relatively short period of time. The spinner angle can be adjusted to allow for driving topdressing material into the turf, minimizing the need for brushing and eliminating variations in moisture control. The CR-8 rolls on four 26.5 x 14-12 4-ply tires with walking high beam suspension, allowing for higher tire pressures that ease the trailer’s impact on the turf. The curved metering gate is fully manually adjustable. KEY FEATURES The CR-8 is perfect for golf courses and sports fields when you need more capacity without using a larger tractor. New larger capacity 2.0 yd 3  self-cleaning, galvanized hopper easily spreads wet or dry material, including sand, lime, compost, soil conditioners and grass clippings. New hydraulic controls, combined with WideSpin Technology, give greater control and wider range of applications to deliver your most accurate spread from light to heavy, wet to dry, and up to 45-feet wide. Reduce the number of passes and decrease traffic with edge-to-edge applications. Drive topdressing down into the turf canopy by adjusting the spinner angle, minimizing the need for brushing and eliminating variations in moisture content (spreads the same wet or dry). Four-wheel dual walking beam suspension for low psi. Standard 3-year warranty. EDGE-TO-EDGE TOPDRESSING Save time and reduce wear on your turf with Turfco's patented WideSpin™ edge-to-edge technology. Decrease the number of passes on your turf by up to 720 per year as compared to the wheel-to-wheel method. Improve productivity and save time; unique 30-foot wide, even spread makes it possible to cover your turf without having to do overlapping. Increase your productivity and dramatically reduce traffic on your course, minimizing the potential for soil compaction and hydraulic leaks. MORE CAPACITY, LOW PSI New larger capacity 2.0 yd 3  self-cleaning galvanized hopper easily spreads wet or dry material, including lime, sand, stone, wood chips, compost, soil conditioners and grass clippings. Four-wheel dual walking beam suspension for low psi also provides lower center of gravity for stability. UNPARALLELED PRODUCTIVITY The CR-8 makes topdressing even easier by combining patented technology with built-in versatility. New hydraulic controls, combined with WideSpin™ Technology, give you greater control and a wider range of applications to deliver your most accurate spread from light to heavy, wet or dry, and up to 45-feet wide. Reduce the number of passes and decrease traffic our your turf with even, edge-to-edge applications. SPECIFICATIONS <table style="border:1px solid black;border-collapse:collapse;padding:1px "> Model 85473 Drive Tractor’s hydraulic system powers belt and attachments Hopper Capacity 2.0 yd3 (1.54 m3) Hopper Galvanized steel Spreading Width 12' to 40' (3.6 m to 12.0 m) Transport Speed Up to 8 MPH (12.8 km/h) Topdressing Speed Up to 8 MPH (12.8 km/h) Conveyor Belt 18" (0.46 m) wide, pebble grain surface with heavy-duty polyester cord, single seam Metering Gate Full manual adjustment with curved gate Controls Patented 3-position switch with belt and spinner control and manually adjusted hydraulic speeds Wheels & Tires Four 26.5 x 14-12 4-ply turf tires with walking high beam suspension Hitch Heavy-duty pin hitch Tractor Requirements Minimum of 30 HP (22.4 kW) with one bank of hydraulics and 6 GPM flow Empty Weight 1,421 lb (644 kg) Dimensions 144" (3.6 m) long x 75" (1.9 m) wide x 67" (1.7 m) tall Optional Attachments Material handler conveyor with swivel (#86181) Warranty 3 years

Turfco's largest capacity product, the CR-15 combines unprecedented productivity and precision topdressing into one workhorse of a machine. It frees up your time and gives you the confidence knowing you're meeting your agronomic goals. Turfco's new digital Smart Controller gives you the ability to take control of your topdressing program. Calculate your rates, save your preferred settings and tackle any of your projects on your course. One season with the CR-15 and you'll wonder how you ever got by without it. OVERVIEW The CR-15 Large Area Topdresser & Material Handler revolutionizes fairway and large area topdressing in the same way the WideSpin 1550 does for greens. It comes equipped with a digital Smart Controller that gives superintendents the ability to calculate their preferred rates then lock in rates and widths into four savable pre-sets. Operators can switch between presets on the fly for greater productivity. The edge-to-edge spread capability offers a consistent application that's pinpoint accurate, eliminating waste. Miscalculating a spread by five feet off the fairways can add up to 4 hoppers loads or more. Areas needing heavier applications like landing zones can be handled with the push of a button. Backed by a 3-year warranty, the CR-15 doubles as an all-purpose construction and renovation machine. Quickly load other topdressers, turf vehicles and spreaders or move around the course. Use it on a daily basis for everything from renovating bunkers and filling ditches to fixing washout areas. Topdress fairways Load topdressers In-house construction Renovate bunkers Fill irrigation trenches Transfer material to hard-to-reach places Fix washout areas Rebuild tees KEY FEATURES Lock in preferred rates and widths into four savable presets. Switch between presets on the go, never leaving the seat. Switch from narrow to wide widths while maintaining the same rate. The CR15 is able to instantly adjust to heavier rates for landing zones or drainage areas Input your square footage and desired rates into the controller to calculate material amount and rates. Controller covered by 3 year warranty. Unique frame design keeps tongue weight consistent with shifting loads and provides greater clearance for attachments. No need to lift rear of unit to transport around the property, or when topdressing. Keeps your CGI low for comfortable control. Rear mounted cross conveyor with 180 degree swivel gives easy access to tight areas and allows operator to evenly spread around material without moving machine. Dual-beam suspension provides lower center of gravity for maximum stability. Self-cleaning hopper made of galvanized steel keeps wide range of material flowing freely. No need for costly hopper vibrator. “Fast Attach” system requires no tools when connecting attachments. The rear of the CR-15 raises up to 6 ft for quick loading of topdressers, turf vehicles and spreaders. Low profile and light PSI let you easily move large volumes of material. PATENTED SMART CONTROLLER Our unique digital Smart Controller let's you lock in your preferred rates and widths into four savable presets, allowing operators to switch between them on the fly, never leaving the seat. Instantly adjust to heavier rates on landing zones or draining areas by pushing a button. Switch from narrow to wide widths while maintaining the same rate. The controller even helps you calculate material - just input square footage and desired rate into the on-board calculator to get the amount needed. Covered with a three year warranty. Truly a smart controller. SAVE ON MATERIAL AND LABOR With the CR-15 you can easily adjust spread widths while keeping the same material rates, saving on material and labor. The edge-to-edge capability offers a consistent application that's pinpoint accurate. Miscalculating a spread by five feet off the fairway can add up to 4 hopper loads or more of material. Areas needing heavier applications like landing zones can be handled at the push of a button. WORKFORCE MULTIPLIER The CR-15 doubles as an all-purpose construction and renovation machine. Quickly load other topdressers, turf vehicles and spreaders or move around the course. Use it on a daily basis for everything from renovating bunkers and filling ditches to fixing washout areas. Add a conveyor attachment and place material like bunker sand right where you want it. One season with the CR-15 and you'll wonder how you ever got by without it. SPECIFICATIONS <table style="border:1px solid black;border-collapse:collapse;padding:1px "> Model #85442 with brakes; #85443 without surge brakes Drive Tractor’s hydraulic system powers belt and attachments Hopper Capacity 4 yd3 (3.06 m3) Hopper Galvanized steel panels Transport Speed Up to 15 MPH (24 km/h) empty; Up to 8 MPH (12.8 km/h) loaded Topdressing Speed Up to 6 MPH (9.6 km/h) Conveyor Belt 32" (0.81 m) wide, pebble grain surface with heavy-duty polyester cord Metering Gate Full manual adjustment with the ability to fully open entire rear hopper panel Smart Control 3-position switch; 4 programmable presets; onboard rate calculator; instantaneous belt and spinner speed control Wheels & Tires Four 31" x 15.5"-15" turf tires Hitch Heavy-duty, adjustable height pin hitch Tractor Requirements Minimum of 40 HP (29.4 kW) with one bank of hydraulics Empty Weight 3,600 lb (1,630 kg) Dimensions 185" (4.7 m) long x 84" (2.1 m) wide x 86" (2.2 m) tall (lowered), 91" (2.3 m) tall (raised) Optional Equipment Conveyor Attachment (#86147); Conveyor Attachment Swivel (#86149); WideSpin Spinner Attachment (#86300) Warranty 3 Years, including Smart Controller

Damaged turf on your #7 tee? Weak areas on your #2 and #12 greens? Want to improve the overall stand of grass on your high traffic areas? With the TriWave™ 45 Overseeder you can repair, restore and renew the beauty of your course faster and with better results than ever before. Quickly hook-up to your favorite turf vehicle and go. The TriWave's 1½-inch seed spacing, combined with two independent floating heads, greatly increases germination by following the contours of the terrain with minimum disruption to turf. OVERVIEW If you want to get great germination with less disruption, get a TriWave™ 45 Overseeder. As with the many superintendents who helped in its development, you'll find the TriWave truly delivers on the needs to better follow contours, to get better germination rates, and to get the seeds at the right depth without the disruption. Whether its your fairways, roughs, tees, driving ranges, or greens, the TriWave is the answer. The patented delivery system places seed directly into the slit, reducing waste while further increasing germination. And, seed depth can be infinitely adjusted in the field to suit the needs of each situation. With the TriWave 45's floating heads, you won't miss the low spots or destroy the high spots or unmarked sprinkler heads. Patented WaveBlade technology, counter-rotating at 900 RPM, creates a clean, optimal square slit while minimizing turf disruption.  If you want to get great germination with less disruption, demo the TriWave 45 Overseeder soon. You'll find the it truly makes a difference on your course. KEY FEATURES Hooks up to your favorite turf vehicle and seeds while you turn so you can follow greens, collars and contours. No tractor or PTOs required. Dual 18-inch floating heads follow the contours of the ground so you won’t miss the low spots, damage the high spots or sprinkler heads. Floating heads dramatically increase germination rates. Patented seed delivery system puts the seed directly into the slit, reducing waste and increasing germination. Patented WaveBlade technology, counter-rotating at 900 RPM, creates a clean, optimal square slit while minimizing turf disruption. Patented depth adjustment allows for infinite, in-field adjustment to suit your specific needs, no tools required. Close 1-1/2" spacing increases germination with fewer passes. Easy to switch out green blades to fairway blades. 3-Year warranty. MINIMIZE TURF DISRUPTION The Turfco TriWave™ series of overseeders includes Turfco's revolutionary patent-pending floating heads that follow the controls of the ground so you won't miss the low spots or damage the high spots or unmarked sprinkler heads. This helps optimize seed-to-soil contact for better germination – up to 30% better. Work more efficiently when you can hook up to your turf vehicle and quickly seed all your trouble spots in one trip. SEED RIGHT THE FIRST TIME Turfco worked directly with sports turf managers to help design the innovative TriWave series of overseeders. The patented quick-adjust depth control is one of the innovations developed to make overseeding more effective and time productive. With quick-adjust you can easily adjust how deep you want to deliver seeds based on the varying conditions. No need for time-wasting mechanical guesswork. OPTIMIZE SEED-TO-SOIL CONTACT Patented WaveBlade technology, counter-rotating at 900RPM, creates a clean, optimal square slit while minimizing turf disruption. Traditional overseeders create a v-shaped slit, causing seeds to lay on top each other for inconsistent soil contact. TriWave's square slit drops seeds at the right depth and directly onto the soil. The result is up to 30% better germination. SPECIFICATIONS <table style="border:1px solid black;border-collapse:collapse;padding:1px "> Model 85858 - equipped with factory installed Standard Fairway Blades; 85859 - equipped with factory installed Greens Blades Width 66" (1.67 m) Height 56.5" (1.43 m) Length 80.5" (2.05 m) Capacity 3.2 ft3 (0.09 m3 ) Approx. 50 lb of grass seed Seed Application Pattern Seed spacing 1-1/2" (38.1 mm) apart Seeding Width 40" (1.01 m) Seed Gate Automatic operation, adjustable variable opening Ground Speed Operating Speed: 3 MPH (4.8 km/h); Transport Speed: 6 MPH (9.6 km/h) Transport Speed Up to 6 MPH (9.6 km/h) (maximum) Productivity 5, 868 yards/hour at 3 mph (4,897 sq meters/h at 4.8 km/h) Cutting Heads 2 heads, independently floating Blade Assembly 2 WaveBlade sets, 20 blades total Blade Assembly Operating Depth Range 0 to 1 3/8" (0 to 34.9 mm) Engine 25 HP Briggs and Stratton Vanguard with electric start and 20 AMP charging system Electrical Fuse protected electric clutch and seed box motor. Requires customer supplied 12 volt DC group U1 battery Hydraulics Hydraulic cylinder to raise/lower the wheels. Hydraulic power supplied by the tow vehicle Clutch Electric clutch with double groove V-belt Hitch Standard 5/8" pin, equipped with jackstand Weight 1,070 lbs (485 Kg) hopper empty Optional Equipment Hydraulic Power Kit (HPU) (hose kit not needed when equipped with HPU) #86196 Hydraulic Hose Kit for use with Cushman Truck (#86505) Hydraulic Hose Kit for use with Toro or John Deere Trucks (#86506) Warranty 3 Years

Working directly with golf course superintendents, Turfco designed the innovative TriWave™ 60 Overseeder to produce the results you need. TriWave's 1½-inch seed spacing, combined with three independent floating heads, greatly increases germination rates by following the contours of the terrain for consistent seed depth. It's WaveBlade technology creates clean, optimal slit widths for better seed-to-soil contact while keeping turf disruption to a minimum. Achieve up to 30% better germination. OVERVIEW If you want to get great germination with less disruption, get a TriWave™ 60 Overseeder. As with the many superintendents who helped in its development, you'll find the TriWave truly delivers on the needs to better follow contours, to get better germination rates, and to get the seeds at the right depth without the disruption. Whether its your fairways, roughs, tees, driving ranges, or greens, the TriWave is the answer. The patented delivery system places seed directly into the slit, reducing waste while further increasing germination. And, seed depth can be infinitely adjusted in the field to suit the needs of each situation. With the TriWave 60's floating heads, you won't miss the low spots or destroy the high spots or unmarked sprinkler heads. Patented WaveBlade technology, counter-rotating at 900 RPM, creates a clean, optimal square slit while minimizing turf disruption.  If you want to get great germination with less disruption, demo the TriWave 60 Overseeder soon. You'll find the TriWave truly makes a difference on your course. KEY FEATURES 60-inch application width combines with close, 1-1/2 inch spacing to give you the most productive, highest-germination rate seeder available. Seed box ground drive ensures consistent seed rate. Patented floating heads follow the contour of the ground so you won’t miss the low spots or damage the high spots or unmarked sprinkler heads. Patented seed delivery system works with the WaveBlade technology to optimize seed-to-soil contact with minimal turf disruption. Patented depth adjustment allows for infinite, in-field adjustment to suit your specific needs, no tools required. Close 1-1/2" spacing increases germination with fewer passes. THE NEXT WAVE IN SEEDING IS HERE The Turfco TriWave™ series of overseeders includes Turfco's revolutionary patent-pending floating heads that follow the controls of the ground so you won't miss the low spots or damage the high spots or unmarked sprinkler heads. This helps optimize seed-to-soil contact for better germination – up to 30% better. Work more efficiently when you can hook up to your turf vehicle and quickly seed all your trouble spots in one trip. SEED RIGHT THE FIRST TIME Turfco worked directly with golf course superintendents to help design the innovative TriWave series of overseeders. Turfco's patented depth adjustment technology is one of the innovations developed to make overseeding more effective and time productive. It allows for infinite, in-field adjustment so you can easily adjust how deep you want to deliver seeds based on the varying conditions. No tools required means no need for time-wasting mechanical guesswork. OPTIMAL SEED-TO-SOIL CONTACT Patented WaveBlade technology, counter-rotating at 900RPM, creates a clean, optimal square slit while minimizing turf disruption. Traditional overseeders create a v-shaped slit, causing seeds to lay on top each other for inconsistent soil contact. TriWave's square slit drops seeds at the right depth and directly onto the soil. The result is up to 30% better germination. SPECIFICATIONS <table style="border:1px solid black;border-collapse:collapse;padding:1px "> Tractor Requirements 35 HP minimum to 60 HP maximum (26.1 kW to 44.7 kW) Drive 540 PTO (tractor) Hitch Category 1 or 2, 3-pt. hitch Weight 1,150 lb (521.6 kg) when hopper is empty Maximum Weight with Full Hopper Approximately 1,250 lb (567 kg) Model 85851 Width 74" (1.88 m) Height 51" (1.3 m) Length 40" (1.02 m) without PTO shaft Capacity 4.77 ft3 (8,251 in3 ) Seed Application Pattern Spacing 1 1/2" (38.1 mm) apart Seeding Width 60" (1.52 m) Seed Gate Manually operated, variable opening Warranty 3 years Ground Speed Up to 5.5 mph (8.85 km/h) Optional Equipment TriWave 3-Point Extension Kit Productivity Up to 3 acres per hour Cutting Heads 3 heads, independently floating Blade Assembly 3 WaveBlade sets, 30 total blades Blade Assembly Operating Depth Range 0 to 1-3/8" (0 to 34.9 mm)