Case IH, Lely, Hustler, Doyle Mfg., Turfco - Quality Steel

Standard Features: 14 ga. 304 stainless steel hopper construction 2” x 6” mild steel tubing frame, with heavy duty mild steel corner braces Bolt on hopper to frame, allows easy hopper removal from frame Heavy duty adjustable hitch Heavy duty 8,000 lb. tongue jack Single 7,000 lb. Henschen axle, with 6-bolt hubs 36 x 13.5 / 15 Multi turf tires 1” x 1” mesh type heavy duty 8” conveyor chain All metal press wheel with manual engagement Twin dished type spinners, 19-1/4” diameter with 4 adjustable stainless steel blades Main gearbox and spinner mount assemblies are 304 stainless steel Factory assembled & tested Optional Features: Hydraulic press wheel engagement includes springs, cylinder, and hydraulic hoses Hydraulically driven spinner assembly, with flow control Fitted nylon tarp with grommets Roll Tarp Inspection window in hopper front The Doyle 2 Ton Ground Wheel Drive Spreader was designed for fertilizing food plots, golf courses, and other turf type applications. The modular design allows Doyle to customize the units to fit your needs; this means that your spreader is no longer a disposable unit. If in the years to come a part fails or wears out, it can be quickly repaired or replaced. This includes the hopper, frame, axle, and all drive assemblies. Our hoppers are constructed of 14 ga. 304 stainless steel. Each hopper is laser cut and jig built to precise measurements; this allows every hopper to fit every frame accurately. A chemical baffle is added inside the hopper; this keeps the material from “bridging” and reduces the amount of weight on the conveyor chain. As with all Doyle products, the hopper seams are continuously welded inside and out. Doyle's unique bin design is easily removable from the frame; just 4 bolts and special box washers hold the hoppers to the frames. The frame assembly is made of heavy duty mild steel; it was designed to be rugged and twist resistant. Doyle's frame consists of a mild steel tubing base, with heavy duty mild steel corner braces. Doyle's corner braces are laser cut, and jig built, that means that every hopper fits on every frame. All frame surfaces are “boxed” to minimize the areas that corrosive materials can be trapped. This allows the operator to easily wash the unit off after use. The frame is metal shot blasted and powder coated bright blue. Each frame uses Henschen axle, multi trac turf tires, adjustable height hitch, and a heavy duty tongue jack. The standard drive system consists of manual engagement assembly, power frame assembly, main gearbox assembly, spinner gearboxes, and spinner dishes. The manual engagement assembly is used to engage and disengage the drive system. The assembly is made of heavy duty mild steel, has CNC machined parts, is metal shot blasted, and powder coated bright blue. An optional hydraulic engagement system is available. The power frame assembly uses a combination of CNC machined parts and laser cut parts, and is jig built. The power frame assembly transfers power from the units tires to the gearbox assembly. The assembly has a uniquely designed power wheel. When engaged, this wheel grips the tire, and produces a slip-free connection, in most cases. If surface moisture or mud is a problem, an optional mud tire and power wheel combination is available for 5 ton unit only. The main gearbox assembly consists of specialized gears and sprockets enclosed in a heavy duty gear case. The gear case is made of 304 stainless steel. Each gearbox has laser cut parts and is jig assembled, making for a virtually leak proof case. The gearbox is powered by the power frame assembly. Its job is to provide the power to the conveyor chain and the spinner gear boxes. A sight glass is installed in each gearbox; this allows the operator to quickly assess the oil level inside the gearbox. The spinner gearboxes are custom made for Doyle; they have been engineered to be long lasting and reliable, in all operating conditions. The spinner gearboxes are painted bright blue. The twin 19-1/4″ spinner dishes are made of heavy duty mild steel. Each spinner dish has three laser cut blade location holes. Four 304 stainless steel blades are bolted into these holes. The blades shape is specifically designed to throw material consistently and evenly. Each blade can be fine tuned by moving it to any one of the three operating locations. The blade locations have been calibrated by Doyle to provide the most consistent spread rates, with the broadest range of materials.

Standard Features: 14 ga. 304 stainless steel hopper construction 2″ x 6″ mild steel tubing frame, with heavy duty mild steel corner braces and 4″ x 6″ tubing tongue Bolt on hopper to frame, allows easy hopper removal from frame Heavy duty adjustable hitch Heavy duty 12,000 lb. tongue jack Single spindle design, with 8-bolt hubs 11.25 – 24SL implement rib tires 1″ x 1″ mesh type heavy duty 8″ conveyor chain All metal double press wheel with manual / hydraulic engagement, includes cylinder and hoses Twin dished type spinners, 19-1/4″ diameter with 4 adjustable stainless steel blades Tire hubs are reversible, providing 30″ or 38″ row spacing Inspection window in hopper front (standard on mid-clearance units only) Main gearbox and spinner mount assemblies are 304 stainless steel Factory assembled & tested Our 5 and 6 Ton Ground Wheel Drive Spreaders have the best features, and are the most durable spreaders on the market today. The modular design allows Doyle to customize the units to your needs, this means that your spreader is no longer a disposable unit. If in the years to come a part fails or wears out, it can be quickly repaired or replaced. This includes the hopper, frame, axles, and all drive assemblies. Our hoppers are constructed of either 14 ga. 409 stainless steel or 14 ga. 304 stainless steel. Each hopper is laser cut and jig built to precise measurements; this allows every hopper to fit every frame accurately. A chemical baffle is added inside the hopper; this keeps the material from “bridging” and reduces the amount of weight on the conveyor chain. As with all Doyle products, the hopper seams are continuously welded inside and out. The 409 hoppers are metal shot blasted and powder coated white. Doyle's unique bin design is easily removable from the frame; just 4 bolts and special box washers hold the hoppers to the frames. The frame assembly is made of heavy duty mild steel; it was designed to be rugged and twist resistant. Doyle's frame consists of a mild steel tubing base, with heavy duty mild steel corner braces. Doyle's corner braces are laser cut, and jig built, that means that every hopper fits on every frame. All frame surfaces are “boxed” to minimize the areas that corrosive materials can be trapped. This allows the operator to easily wash the unit off after use. The frame is metal shot blasted and powder coated bright blue. Each frame uses tandem Henschen axles, ribbed highway implement tires, adjustable height hitch, and a heavy duty tongue jack. The standard drive system consists of manual engagement assembly, power frame assembly, main gearbox assembly, spinner gearboxes, and spinner dishes. The manual engagement assembly is used to engage and disengage the drive system. The assembly is made of heavy duty mild steel, has CNC machined parts, is metal shot blasted, and powder coated bright blue. An optional hydraulic engagement system is available. The power frame assembly uses a combination of CNC machined parts and laser cut parts, and is jig built. The power frame assembly transfers power from the units tires to the gearbox assembly. The assembly has a uniquely designed power wheel. When engaged, this wheel grips the tire, and produces a slip-free connection, in most cases. If surface moisture or mud is a problem, an optional mud tire and power wheel combination is available for 5 ton unit only. The main gearbox assembly consists of specialized gears and sprockets enclosed in a heavy duty gear case. The gear case is made of 304 stainless steel, when the 304 stainless steel hopper is used. It is constructed of mild steel, when the 409 stainless steel hopper is used. The mild steel gear case is metal shot blasted, and powder coated bright blue. Each gearbox has laser cut parts and is jig assembled, making for a virtually leak proof case. The gearbox is powered by the power frame assembly. Its job is to provide the power to the conveyor chain and the spinner gear boxes. A sight glass is installed in each gearbox; this allows the operator to quickly assess the oil level inside the gearbox. The spinner gearboxes are custom made for Doyle; they have been engineered to be long lasting and reliable, in all operating conditions. The spinner gearboxes are painted bright blue. The twin 19-1/4″ spinner dishes are made of heavy duty mild steel. Each spinner dish has three laser cut blade location holes. Four 304 stainless steel blades are bolted into these holes. The blades shape is specifically designed to throw material consistently and evenly. Each blade can be fine tuned by moving it to any one of the three operating locations. The blade locations have been calibrated by Doyle to provide the most consistent spread rates, with the broadest range of materials.

Standard Features: 12 ga. 304 stainless steel hopper construction 2″ x 6″ mild steel tubing frame, with heavy duty mild steel corner braces Bolt on hopper to frame, allows easy hopper removal from frame Heavy duty adjustable hitch Heavy duty 12,000 lb. tongue jack Tandem 8,000 lb. axles, with 8-bolt hubs 14 L x 16.1 Hi-speed implement rib tires 1″ x 1″ mesh type heavy duty 8″ conveyor chain 1″ x 1″ mesh type heavy duty #304 stainless steel conveyor chain, 8″ wide Hydraulically driven twin “dished” spinners, 19-1/4″ diameter with 4 blades per spinner, specially designed for extremely accurate broadcasting of spreader Conveyor driven by press wheel, engaged and disengaged with hydraulic cylinder connected to tractor Inspection window in hopper front Factory assembled & tested Optional Features: PTO Drive System, w/ 29.5 gallon hydraulic tank with temperature gauge, site glass, and large hydraulic filters, metal shot blasted and powder coated bright blue Fitted nylon tarp with grommets Roll Tarp Surge brake system, 1 axle

Standard Features: 14 ga. 409 stainless steel hopper construction, all metal shot blasted and powder coated OR 14 ga. 304 stainless steel hopper construction 2″ x 6″ mild steel tubing frame, with heavy duty mild steel corner braces Bolt on hopper to frame, allows easy hopper removal from frame Heavy duty adjustable hitch Heavy duty 12,000 lb. tongue jack Tandem 8,000 lb. axles, with 8-bolt hubs 14 L x 16.1 Hi-speed implement rib tires 1″ x 1″ mesh type heavy duty 8″ conveyor chain All metal press wheel with hydraulic engagement 31.5 gallon hydraulic tank with temperature gauge, site glass, and large hydraulic filters, metal shot blasted and powder coated bright blue Hydraulic PTO pump, lines, hoses, and fittings Twin dished type spinners, 20-5/16″ diameter with 4 adjustable stainless steel blades

Standard Features: #304 stainless steel hopper construction Bolt together design, hopper to chassis Tandem 10,000 lb. axle suspension, with 8-bolt hubs 19 L x 16.1 tires on W16CH x 16.1 wheels Utilizes two sets of sprockets for conveyor rates 1” x 1” mesh type heavy duty #304 stainless steel conveyor chain, 20” wide Conveyor driven by press wheel, engaged and disengaged with hydraulic cylinder connected to tractor Metering gate sprockets, metering gate, gate slides, and gate shaft manufactured in #304 stainless steel Hydraulically driven twin “dished” spinners, 24” diameter with 4 blades per spinner, specially designed for extremely accurate broadcasting of spreader Factory assembled & tested Optional Features: PTO Drive System, w/ 29.5 gallon hydraulic tank Surge brake system, 1 axle Surge brake system, 2 axles Fitted nylon tarp with grommets Roll Tarp Inspection window in hopper front

Hopper capacity of 550 lbs* (350 kgs) Forward speed of 4.5 mph (7.2 km/h) gives an effective spreading width of up to 52' (16 meters) Disengagement for towing, remote rope feed control and side spreading adjustment is standard Ground driven broadcasters are used for spreading fertilizer on golf courses, sports fields, parks or green areas. The W broadcast spreader is an accurate way to apply lime, turf seed, grains and sand. Land wheels are fitted with tractor profile (WGR), or lawn flotation (WFR) tires. All the standard features of the WFR are included and the optional mass feedring and short spoons give a spreading width of up to 18' (6 meters). SAND AND SALT This trailed spreader also does an excellent job spreading sand (top dressing) and/or salt (snow and ice). For sand and/or salt, a special ejector disc with short spoons gives a spreading width of up to 18' (6 meters).  SPREADING SYSTEM The spreading pattern adjustment plate, with section indication, provides a variety of settings to ensure simple operation. DYNAMIC DESIGN Six dynamically designed spoons direct a metered quantity of material to the field, ensuring a constant and precise material feed from the disc to the spoons. EASY TO CLEAN All Lely broadcast spreaders have hoppers that can be removed or tilted up by one or two latches, making for a quick and easy cleaning of the critical feedring assembly area and ejector disk, as well as ensuring a long life for the spreaders. *All weight capacity’s are based upon 46-0-0 granular weight assumption of 48 pounds per cu. ft. Model Type Hopper Capacity (CU. FT.) Hopper Capacity (LBS.) Empty Weight Length Height Width Tire Spread Width WFR Trail, Ground Drive Flotation Tires 11.5 805 428 79” 48” 64” Flotation 18x9.50x81up up to 52’ WGR Trail, Ground Drive Ground Grip Tires 11.5 805 410 79” 49” 50” Ground 4.00x12 up to 52’ HR 3-pt. hitch p.t.o driven 11.5 805 320 38” 43” 51” — up to 52’ 1250 3-pt. hitch p.t.o driven 18.9 1,323 375 53” 51” 62” — up to 52’ 1500 3-pt. hitch p.t.o driven 23.6 1,650 420 50” 44” 77” — up to 52’ 2010 3-pt. hitch p.t.o driven 32.5 2,275 452 48” 49” 79” — up to 52’

3-point hitch and PTO driven Hopper capacity of 550 lbs* (350 kgs) Accurate for up to 52' (16 meter) center or side applications One latch releases the hopper so all moving parts can be easily cleaned. An optional hopper extension increases capacity by up to 200 lbs* (90 kgs). SPREADING SYSTEM The spreading pattern adjustment plate, with section indication, provides a variety of settings to ensure simple operation. DYNAMIC DESIGN Six dynamically designed spoons direct a metered quantity of material to the field, ensuring a constant and precise material feed from the disc to the spoons. EASY TO CLEAN All Lely broadcast spreaders have hoppers that can be removed or tilted up by one or two latches, making for a quick and easy cleaning of the critical feedring assembly area and ejector disk, as well as ensuring a long life for the spreaders. *All weight capacity’s are based upon 46-0-0 granular weight assumption of 48 pounds per cu. ft. Model Type Hopper Capacity (CU. FT.) Hopper Capacity (LBS.) Empty Weight Length Height Width Tire Spread Width WFR Trail, Ground Drive Flotation Tires 11.5 805 428 79” 48” 64” Flotation 18x9.50x81up up to 52’ WGR Trail, Ground Drive Ground Grip Tires 11.5 805 410 79” 49” 50” Ground 4.00x12 up to 52’ HR 3-pt. hitch p.t.o driven 11.5 805 320 38” 43” 51” — up to 52’ 1250 3-pt. hitch p.t.o driven 18.9 1,323 375 53” 51” 62” — up to 52’ 1500 3-pt. hitch p.t.o driven 23.6 1,650 420 50” 44” 77” — up to 52’ 2010 3-pt. hitch p.t.o driven 32.5 2,275 452 48” 49” 79” — up to 52’

Converts both the L1500 and L2010 to a trailer broadcast spreader No powerful lifting power is required Fertilizer, chemical or topdress spreading can be carried out with smaller tractors The spreader is PTO driven and offers a remote rope control feedring and side spreading, retaining all of the advantages of a 3-point spreader. Model Type Hopper Capacity (CU. FT.) Hopper Capacity (LBS.) Empty Weight Length Height Width Tire Spread Width WFR Trail, Ground Drive Flotation Tires 11.5 805 428 79” 48” 64” Flotation 18x9.50x81up up to 52’ WGR Trail, Ground Drive Ground Grip Tires 11.5 805 410 79” 49” 50” Ground 4.00x12 up to 52’ HR 3-pt. hitch p.t.o driven 11.5 805 320 38” 43” 51” — up to 52’ 1250 3-pt. hitch p.t.o driven 18.9 1,323 375 53” 51” 62” — up to 52’ 1500 3-pt. hitch p.t.o driven 23.6 1,650 420 50” 44” 77” — up to 52’ 2010 3-pt. hitch p.t.o driven 32.5 2,275 452 48” 49” 79” — up to 52’

Mounted by 3-point hitch/PTO driven, Category I or II Hopper capacity of up to 930 lbs* (422 kgs) of material Will handle bulk bagged fertilizers A pivoting hopper makes changing the feedring quick and easy. For sand top dressing, a mass feedring assembly option is also available. SPREADING SYSTEM The spreading pattern adjustment plate, with section indication, provides a variety of settings to ensure simple operation. DYNAMIC DESIGN Six dynamically designed spoons direct a metered quantity of material to the field, ensuring a constant and precise material feed from the disc to the spoons. EASY TO CLEAN All Lely broadcast spreaders have hoppers that can be removed or tilted up by one or two latches, making for a quick and easy cleaning of the critical feedring assembly area and ejector disk, as well as ensuring a long life for the spreaders. *All weight capacity’s are based upon 46-0-0 granular weight assumption of 48 pounds per cu. ft. Model Type Hopper Capacity (CU. FT.) Hopper Capacity (LBS.) Empty Weight Length Height Width Tire Spread Width WFR Trail, Ground Drive Flotation Tires 11.5 805 428 79” 48” 64” Flotation 18x9.50x81up up to 52’ WGR Trail, Ground Drive Ground Grip Tires 11.5 805 410 79” 49” 50” Ground 4.00x12 up to 52’ HR 3-pt. hitch p.t.o driven 11.5 805 320 38” 43” 51” — up to 52’ 1250 3-pt. hitch p.t.o driven 18.9 1,323 375 53” 51” 62” — up to 52’ 1500 3-pt. hitch p.t.o driven 23.6 1,650 420 50” 44” 77” — up to 52’ 2010 3-pt. hitch p.t.o driven 32.5 2,275 452 48” 49” 79” — up to 52’