Doyle Mfg., TriArc, Turfco, Smithco, Capillary Flow, Quality Steel - B&B Technologies

Standard Features: (2) 241 cu. ft. compartments in 12 ga. 304 stainless stee 10″ x 12 ga. 304 stainless steel auger tube, and augers with 304 stainless steel flighting and mils steel pipe Heavy duty 304 stainless steel square tubing main frame 1.75 ton per minute discharge rate Stainless steel manually operated slide gates Tender with front and rear ladder 20 ft. hydraulically raised and lowered discharge auger, 14 foot discharge height Mild steel trailer fenders, with Doyle mud flaps 18.5 gallon hydraulic tank with temperature gauge, site glass, and large hydraulic filters, metal shot blasted and powder coated bright blue Hydraulic pump, cylinders, lines, hoses, and fittings Roll tarp with stainless steel end caps D.O.T. approved lights, tail and marker Factory assembled & tested

Standard Features: 14 ga. 304 stainless steel hopper construction 2” x 6” mild steel tubing frame, with heavy duty mild steel corner braces Bolt on hopper to frame, allows easy hopper removal from frame Heavy duty adjustable hitch Heavy duty 8,000 lb. tongue jack Single 7,000 lb. Henschen axle, with 6-bolt hubs 36 x 13.5 / 15 Multi turf tires 1” x 1” mesh type heavy duty 8” conveyor chain All metal press wheel with manual engagement Twin dished type spinners, 19-1/4” diameter with 4 adjustable stainless steel blades Main gearbox and spinner mount assemblies are 304 stainless steel Factory assembled & tested Optional Features: Hydraulic press wheel engagement includes springs, cylinder, and hydraulic hoses Hydraulically driven spinner assembly, with flow control Fitted nylon tarp with grommets Roll Tarp Inspection window in hopper front The Doyle 2 Ton Ground Wheel Drive Spreader was designed for fertilizing food plots, golf courses, and other turf type applications. The modular design allows Doyle to customize the units to fit your needs; this means that your spreader is no longer a disposable unit. If in the years to come a part fails or wears out, it can be quickly repaired or replaced. This includes the hopper, frame, axle, and all drive assemblies. Our hoppers are constructed of 14 ga. 304 stainless steel. Each hopper is laser cut and jig built to precise measurements; this allows every hopper to fit every frame accurately. A chemical baffle is added inside the hopper; this keeps the material from “bridging” and reduces the amount of weight on the conveyor chain. As with all Doyle products, the hopper seams are continuously welded inside and out. Doyle's unique bin design is easily removable from the frame; just 4 bolts and special box washers hold the hoppers to the frames. The frame assembly is made of heavy duty mild steel; it was designed to be rugged and twist resistant. Doyle's frame consists of a mild steel tubing base, with heavy duty mild steel corner braces. Doyle's corner braces are laser cut, and jig built, that means that every hopper fits on every frame. All frame surfaces are “boxed” to minimize the areas that corrosive materials can be trapped. This allows the operator to easily wash the unit off after use. The frame is metal shot blasted and powder coated bright blue. Each frame uses Henschen axle, multi trac turf tires, adjustable height hitch, and a heavy duty tongue jack. The standard drive system consists of manual engagement assembly, power frame assembly, main gearbox assembly, spinner gearboxes, and spinner dishes. The manual engagement assembly is used to engage and disengage the drive system. The assembly is made of heavy duty mild steel, has CNC machined parts, is metal shot blasted, and powder coated bright blue. An optional hydraulic engagement system is available. The power frame assembly uses a combination of CNC machined parts and laser cut parts, and is jig built. The power frame assembly transfers power from the units tires to the gearbox assembly. The assembly has a uniquely designed power wheel. When engaged, this wheel grips the tire, and produces a slip-free connection, in most cases. If surface moisture or mud is a problem, an optional mud tire and power wheel combination is available for 5 ton unit only. The main gearbox assembly consists of specialized gears and sprockets enclosed in a heavy duty gear case. The gear case is made of 304 stainless steel. Each gearbox has laser cut parts and is jig assembled, making for a virtually leak proof case. The gearbox is powered by the power frame assembly. Its job is to provide the power to the conveyor chain and the spinner gear boxes. A sight glass is installed in each gearbox; this allows the operator to quickly assess the oil level inside the gearbox. The spinner gearboxes are custom made for Doyle; they have been engineered to be long lasting and reliable, in all operating conditions. The spinner gearboxes are painted bright blue. The twin 19-1/4″ spinner dishes are made of heavy duty mild steel. Each spinner dish has three laser cut blade location holes. Four 304 stainless steel blades are bolted into these holes. The blades shape is specifically designed to throw material consistently and evenly. Each blade can be fine tuned by moving it to any one of the three operating locations. The blade locations have been calibrated by Doyle to provide the most consistent spread rates, with the broadest range of materials.

Standard Features: 14 ga. 304 stainless steel hopper construction 2″ x 6″ mild steel tubing frame, with heavy duty mild steel corner braces and 4″ x 6″ tubing tongue Bolt on hopper to frame, allows easy hopper removal from frame Heavy duty adjustable hitch Heavy duty 12,000 lb. tongue jack Single spindle design, with 8-bolt hubs 11.25 – 24SL implement rib tires 1″ x 1″ mesh type heavy duty 8″ conveyor chain All metal double press wheel with manual / hydraulic engagement, includes cylinder and hoses Twin dished type spinners, 19-1/4″ diameter with 4 adjustable stainless steel blades Tire hubs are reversible, providing 30″ or 38″ row spacing Inspection window in hopper front (standard on mid-clearance units only) Main gearbox and spinner mount assemblies are 304 stainless steel Factory assembled & tested Our 5 and 6 Ton Ground Wheel Drive Spreaders have the best features, and are the most durable spreaders on the market today. The modular design allows Doyle to customize the units to your needs, this means that your spreader is no longer a disposable unit. If in the years to come a part fails or wears out, it can be quickly repaired or replaced. This includes the hopper, frame, axles, and all drive assemblies. Our hoppers are constructed of either 14 ga. 409 stainless steel or 14 ga. 304 stainless steel. Each hopper is laser cut and jig built to precise measurements; this allows every hopper to fit every frame accurately. A chemical baffle is added inside the hopper; this keeps the material from “bridging” and reduces the amount of weight on the conveyor chain. As with all Doyle products, the hopper seams are continuously welded inside and out. The 409 hoppers are metal shot blasted and powder coated white. Doyle's unique bin design is easily removable from the frame; just 4 bolts and special box washers hold the hoppers to the frames. The frame assembly is made of heavy duty mild steel; it was designed to be rugged and twist resistant. Doyle's frame consists of a mild steel tubing base, with heavy duty mild steel corner braces. Doyle's corner braces are laser cut, and jig built, that means that every hopper fits on every frame. All frame surfaces are “boxed” to minimize the areas that corrosive materials can be trapped. This allows the operator to easily wash the unit off after use. The frame is metal shot blasted and powder coated bright blue. Each frame uses tandem Henschen axles, ribbed highway implement tires, adjustable height hitch, and a heavy duty tongue jack. The standard drive system consists of manual engagement assembly, power frame assembly, main gearbox assembly, spinner gearboxes, and spinner dishes. The manual engagement assembly is used to engage and disengage the drive system. The assembly is made of heavy duty mild steel, has CNC machined parts, is metal shot blasted, and powder coated bright blue. An optional hydraulic engagement system is available. The power frame assembly uses a combination of CNC machined parts and laser cut parts, and is jig built. The power frame assembly transfers power from the units tires to the gearbox assembly. The assembly has a uniquely designed power wheel. When engaged, this wheel grips the tire, and produces a slip-free connection, in most cases. If surface moisture or mud is a problem, an optional mud tire and power wheel combination is available for 5 ton unit only. The main gearbox assembly consists of specialized gears and sprockets enclosed in a heavy duty gear case. The gear case is made of 304 stainless steel, when the 304 stainless steel hopper is used. It is constructed of mild steel, when the 409 stainless steel hopper is used. The mild steel gear case is metal shot blasted, and powder coated bright blue. Each gearbox has laser cut parts and is jig assembled, making for a virtually leak proof case. The gearbox is powered by the power frame assembly. Its job is to provide the power to the conveyor chain and the spinner gear boxes. A sight glass is installed in each gearbox; this allows the operator to quickly assess the oil level inside the gearbox. The spinner gearboxes are custom made for Doyle; they have been engineered to be long lasting and reliable, in all operating conditions. The spinner gearboxes are painted bright blue. The twin 19-1/4″ spinner dishes are made of heavy duty mild steel. Each spinner dish has three laser cut blade location holes. Four 304 stainless steel blades are bolted into these holes. The blades shape is specifically designed to throw material consistently and evenly. Each blade can be fine tuned by moving it to any one of the three operating locations. The blade locations have been calibrated by Doyle to provide the most consistent spread rates, with the broadest range of materials.

Standard Features: 12 ga. 304 stainless steel hopper construction 2″ x 6″ mild steel tubing frame, with heavy duty mild steel corner braces Bolt on hopper to frame, allows easy hopper removal from frame Heavy duty adjustable hitch Heavy duty 12,000 lb. tongue jack Tandem 8,000 lb. axles, with 8-bolt hubs 14 L x 16.1 Hi-speed implement rib tires 1″ x 1″ mesh type heavy duty 8″ conveyor chain 1″ x 1″ mesh type heavy duty #304 stainless steel conveyor chain, 8″ wide Hydraulically driven twin “dished” spinners, 19-1/4″ diameter with 4 blades per spinner, specially designed for extremely accurate broadcasting of spreader Conveyor driven by press wheel, engaged and disengaged with hydraulic cylinder connected to tractor Inspection window in hopper front Factory assembled & tested Optional Features: PTO Drive System, w/ 29.5 gallon hydraulic tank with temperature gauge, site glass, and large hydraulic filters, metal shot blasted and powder coated bright blue Fitted nylon tarp with grommets Roll Tarp Surge brake system, 1 axle

Standard Features: 14 ga. 409 stainless steel hopper construction, all metal shot blasted and powder coated OR 14 ga. 304 stainless steel hopper construction 2″ x 6″ mild steel tubing frame, with heavy duty mild steel corner braces Bolt on hopper to frame, allows easy hopper removal from frame Heavy duty adjustable hitch Heavy duty 12,000 lb. tongue jack Tandem 8,000 lb. axles, with 8-bolt hubs 14 L x 16.1 Hi-speed implement rib tires 1″ x 1″ mesh type heavy duty 8″ conveyor chain All metal press wheel with hydraulic engagement 31.5 gallon hydraulic tank with temperature gauge, site glass, and large hydraulic filters, metal shot blasted and powder coated bright blue Hydraulic PTO pump, lines, hoses, and fittings Twin dished type spinners, 20-5/16″ diameter with 4 adjustable stainless steel blades

Standard Features: #304 stainless steel hopper construction Bolt together design, hopper to chassis Tandem 10,000 lb. axle suspension, with 8-bolt hubs 19 L x 16.1 tires on W16CH x 16.1 wheels Utilizes two sets of sprockets for conveyor rates 1” x 1” mesh type heavy duty #304 stainless steel conveyor chain, 20” wide Conveyor driven by press wheel, engaged and disengaged with hydraulic cylinder connected to tractor Metering gate sprockets, metering gate, gate slides, and gate shaft manufactured in #304 stainless steel Hydraulically driven twin “dished” spinners, 24” diameter with 4 blades per spinner, specially designed for extremely accurate broadcasting of spreader Factory assembled & tested Optional Features: PTO Drive System, w/ 29.5 gallon hydraulic tank Surge brake system, 1 axle Surge brake system, 2 axles Fitted nylon tarp with grommets Roll Tarp Inspection window in hopper front

The Model TT200/160 is a 200/160-gallon sprayer designed to make your Textron truck a dedicated unit. By using a unique tank and boom design, it offers the operator greater safety and spraying accuracy. However, the sprayer is easily removed making you truck available for other projects. TANK The tank is a low-profile 200/160 gallon poly with an oversized sump and dual inductor agitation nozzles, that provide excellent mixing action, yet allow complete drainage of the tank. Its corner-fill well with splash guard provides greater safety because the operator does not have to reach over the sprayer when filling with chemicals or water. SPRAY BOOM The spray boom is a three sectioned, balanced boom. It has 4-20" nozzles per section to give greater spraying accuracy and a coverage up to 20'. The boom wings have breakaway action, end guards, and can fold forward or cross in the back. It comes complete with Quick-Jet nozzle caps, no-drip diaphragm check valves, and your choice of nozzles. BOOM VALVING The standard control console with motorized ball valves and a butterfly servo valve give complete control of the 3 boom sections and instant control of pressure. PUMP The high efficiency hydraulic driven pump provides up to 120 psi or up to 75 gal/min and is driven off the vehicles standard hydraulic system. FRAME The heavy formed steel frame mounts with 2 quick-hitch pins in the back and 2 hold-down pins in the front. EMERGENCY WASH TANK All units come complete with an emergency 3-gallon water tank. ACCESSORIES Accessories include anti-siphon fill valve, sprayer stands, foam marker, hand gun & rack, hose reels, electric boom lift, covered boom, and automatic rate controllers.

The Model TT200XD/160XD is a 200/160-gallon sprayer designed to make your XD Textron truck a dedicated unit. By using a unique tank and boom design, it offers the operator greater safety and spraying accuracy. However, the sprayer is easily removed making you truck available for other projects. TANK The tank is a low-profile 200/160 gallon poly with an oversized sump and dual inductor agitation nozzles, that provide excellent mixing action, yet allow complete drainage of the tank. Its corner-fill well with splash guard provides greater safety because the operator does not have to reach over the sprayer when filling with chemicals or water. SPRAY BOOM The spray boom is a three sectioned, balanced boom. It has 4-20" nozzles per section to give greater spraying accuracy and a coverage up to 20'. The boom wings have breakaway action, end guards, and can fold forward or cross in the back. It comes complete with Quick-Jet nozzle caps, no-drip diaphragm check valves, and your choice of nozzles. BOOM VALVING The standard control console with motorized ball valves and a butterfly servo valve give complete control of the 3 boom sections and instant control of pressure. PUMP The high efficiency hydraulic driven pump provides up to 120 psi or up to 75 gal/min and is driven off the vehicles standard hydraulic system. FRAME The heavy formed steel frame mounts with 2 quick-hitch pins in the back and the cylinder pin in the front. EMERGENCY WASH TANK All units come complete with an emergency 3-gallon water tank. ACCESSORIES Accessories include anti-siphon fill valve, sprayer stands, foam marker, hand gun & rack, chemical inductor, hose reels, electric boom lift, covered boom, and automatic rate controllers.

Increase the longevity of the bunker sand and ensure that it always looks clean and fresh with the Capillary Bunker Liner.  This liner, when used alonside their Wash Box allows for the bunker sand to be washed clean should there ever be any contamination from outside of the bunker (soil, dust, grass etc.). Main Benefits: Decreased Maintenence Consistent Performance Longer Lifespan of Bunker Sand Quick and Easy Installation Eliminates Offers • Washouts • Beautiful bunkers • Flooding • Consistent performance • Soil contamination • Improved playability • Inconsistent moisture levels • Pristine bunker sand • Plugged ball lies • Maintained design integrity • The need to replace sand due to contamination • Extended sand life • Excessive maintenance Testimonial "When we started discussing our renovation options, I had several goals. The first was to solve design problems to make the bunkers less prone to washout and improve maintainability. My second goal was to ensure we sourced high-quality sand pure of impurities and performed well during rain and for play. Improved drainage was also a major component of our project. Finally, I was committed to using a premium bunker liner to improve performance during rain events and prevent contamination. We selected Capillary Concrete to line our bunkers for several reasons. First, it comes as a homogenous mixture, making the product easier and more consistent to install than other options. Second, on the list is the value. Considering all the effort in a project of this scope, I didn't want to cut any corners. Capillary Concrete was the best value in having a premium product that would stand the test of time at an affordable installed cost. Speaking of the test of time- Capillary Concrete came with an unmatched ten-year warranty! After seeing the product installed, I am confident we could easily install the product in-house if we chose to do so. The product support has been fantastic throughout the three phases of our project at Hyperion. We always had a representative on-site to ensure the product was delivered and installed to specifications. Finally, the payoff has been tremendous. A rain event that once took days to restore now takes just a couple of hours. Our members can now have fantastic bunkers to play out of within hours of a thunderstorm rather than all week. My biggest payoff has been improved course conditions since we now have more time to address other details. Finally, if member satisfaction were quantifiable, I'd say the project has paid for itself several times in just a few years." -Jim Sedrel, CGCS Hyperion Field Club Johnston, IA