Search Results

Standard Features: (2) 241 cu. ft. compartments in 12 ga. 304 stainless stee 10″ x 12 ga. 304 stainless steel auger tube, and augers with 304 stainless steel flighting and mils steel pipe Heavy duty 304 stainless steel square tubing main frame 1.75 ton per minute discharge rate Stainless steel manually operated slide gates Tender with front and rear ladder 20 ft. hydraulically raised and lowered discharge auger, 14 foot discharge height Mild steel trailer fenders, with Doyle mud flaps 18.5 gallon hydraulic tank with temperature gauge, site glass, and large hydraulic filters, metal shot blasted and powder coated bright blue Hydraulic pump, cylinders, lines, hoses, and fittings Roll tarp with stainless steel end caps D.O.T. approved lights, tail and marker Factory assembled & tested

Standard Features: 14 ga. 304 stainless steel hopper construction 2” x 6” mild steel tubing frame, with heavy duty mild steel corner braces Bolt on hopper to frame, allows easy hopper removal from frame Heavy duty adjustable hitch Heavy duty 8,000 lb. tongue jack Single 7,000 lb. Henschen axle, with 6-bolt hubs 36 x 13.5 / 15 Multi turf tires 1” x 1” mesh type heavy duty 8” conveyor chain All metal press wheel with manual engagement Twin dished type spinners, 19-1/4” diameter with 4 adjustable stainless steel blades Main gearbox and spinner mount assemblies are 304 stainless steel Factory assembled & tested Optional Features: Hydraulic press wheel engagement includes springs, cylinder, and hydraulic hoses Hydraulically driven spinner assembly, with flow control Fitted nylon tarp with grommets Roll Tarp Inspection window in hopper front The Doyle 2 Ton Ground Wheel Drive Spreader was designed for fertilizing food plots, golf courses, and other turf type applications. The modular design allows Doyle to customize the units to fit your needs; this means that your spreader is no longer a disposable unit. If in the years to come a part fails or wears out, it can be quickly repaired or replaced. This includes the hopper, frame, axle, and all drive assemblies. Our hoppers are constructed of 14 ga. 304 stainless steel. Each hopper is laser cut and jig built to precise measurements; this allows every hopper to fit every frame accurately. A chemical baffle is added inside the hopper; this keeps the material from “bridging” and reduces the amount of weight on the conveyor chain. As with all Doyle products, the hopper seams are continuously welded inside and out. Doyle's unique bin design is easily removable from the frame; just 4 bolts and special box washers hold the hoppers to the frames. The frame assembly is made of heavy duty mild steel; it was designed to be rugged and twist resistant. Doyle's frame consists of a mild steel tubing base, with heavy duty mild steel corner braces. Doyle's corner braces are laser cut, and jig built, that means that every hopper fits on every frame. All frame surfaces are “boxed” to minimize the areas that corrosive materials can be trapped. This allows the operator to easily wash the unit off after use. The frame is metal shot blasted and powder coated bright blue. Each frame uses Henschen axle, multi trac turf tires, adjustable height hitch, and a heavy duty tongue jack. The standard drive system consists of manual engagement assembly, power frame assembly, main gearbox assembly, spinner gearboxes, and spinner dishes. The manual engagement assembly is used to engage and disengage the drive system. The assembly is made of heavy duty mild steel, has CNC machined parts, is metal shot blasted, and powder coated bright blue. An optional hydraulic engagement system is available. The power frame assembly uses a combination of CNC machined parts and laser cut parts, and is jig built. The power frame assembly transfers power from the units tires to the gearbox assembly. The assembly has a uniquely designed power wheel. When engaged, this wheel grips the tire, and produces a slip-free connection, in most cases. If surface moisture or mud is a problem, an optional mud tire and power wheel combination is available for 5 ton unit only. The main gearbox assembly consists of specialized gears and sprockets enclosed in a heavy duty gear case. The gear case is made of 304 stainless steel. Each gearbox has laser cut parts and is jig assembled, making for a virtually leak proof case. The gearbox is powered by the power frame assembly. Its job is to provide the power to the conveyor chain and the spinner gear boxes. A sight glass is installed in each gearbox; this allows the operator to quickly assess the oil level inside the gearbox. The spinner gearboxes are custom made for Doyle; they have been engineered to be long lasting and reliable, in all operating conditions. The spinner gearboxes are painted bright blue. The twin 19-1/4″ spinner dishes are made of heavy duty mild steel. Each spinner dish has three laser cut blade location holes. Four 304 stainless steel blades are bolted into these holes. The blades shape is specifically designed to throw material consistently and evenly. Each blade can be fine tuned by moving it to any one of the three operating locations. The blade locations have been calibrated by Doyle to provide the most consistent spread rates, with the broadest range of materials.

Standard Features: 14 ga. 304 stainless steel hopper construction 2″ x 6″ mild steel tubing frame, with heavy duty mild steel corner braces and 4″ x 6″ tubing tongue Bolt on hopper to frame, allows easy hopper removal from frame Heavy duty adjustable hitch Heavy duty 12,000 lb. tongue jack Single spindle design, with 8-bolt hubs 11.25 – 24SL implement rib tires 1″ x 1″ mesh type heavy duty 8″ conveyor chain All metal double press wheel with manual / hydraulic engagement, includes cylinder and hoses Twin dished type spinners, 19-1/4″ diameter with 4 adjustable stainless steel blades Tire hubs are reversible, providing 30″ or 38″ row spacing Inspection window in hopper front (standard on mid-clearance units only) Main gearbox and spinner mount assemblies are 304 stainless steel Factory assembled & tested Our 5 and 6 Ton Ground Wheel Drive Spreaders have the best features, and are the most durable spreaders on the market today. The modular design allows Doyle to customize the units to your needs, this means that your spreader is no longer a disposable unit. If in the years to come a part fails or wears out, it can be quickly repaired or replaced. This includes the hopper, frame, axles, and all drive assemblies. Our hoppers are constructed of either 14 ga. 409 stainless steel or 14 ga. 304 stainless steel. Each hopper is laser cut and jig built to precise measurements; this allows every hopper to fit every frame accurately. A chemical baffle is added inside the hopper; this keeps the material from “bridging” and reduces the amount of weight on the conveyor chain. As with all Doyle products, the hopper seams are continuously welded inside and out. The 409 hoppers are metal shot blasted and powder coated white. Doyle's unique bin design is easily removable from the frame; just 4 bolts and special box washers hold the hoppers to the frames. The frame assembly is made of heavy duty mild steel; it was designed to be rugged and twist resistant. Doyle's frame consists of a mild steel tubing base, with heavy duty mild steel corner braces. Doyle's corner braces are laser cut, and jig built, that means that every hopper fits on every frame. All frame surfaces are “boxed” to minimize the areas that corrosive materials can be trapped. This allows the operator to easily wash the unit off after use. The frame is metal shot blasted and powder coated bright blue. Each frame uses tandem Henschen axles, ribbed highway implement tires, adjustable height hitch, and a heavy duty tongue jack. The standard drive system consists of manual engagement assembly, power frame assembly, main gearbox assembly, spinner gearboxes, and spinner dishes. The manual engagement assembly is used to engage and disengage the drive system. The assembly is made of heavy duty mild steel, has CNC machined parts, is metal shot blasted, and powder coated bright blue. An optional hydraulic engagement system is available. The power frame assembly uses a combination of CNC machined parts and laser cut parts, and is jig built. The power frame assembly transfers power from the units tires to the gearbox assembly. The assembly has a uniquely designed power wheel. When engaged, this wheel grips the tire, and produces a slip-free connection, in most cases. If surface moisture or mud is a problem, an optional mud tire and power wheel combination is available for 5 ton unit only. The main gearbox assembly consists of specialized gears and sprockets enclosed in a heavy duty gear case. The gear case is made of 304 stainless steel, when the 304 stainless steel hopper is used. It is constructed of mild steel, when the 409 stainless steel hopper is used. The mild steel gear case is metal shot blasted, and powder coated bright blue. Each gearbox has laser cut parts and is jig assembled, making for a virtually leak proof case. The gearbox is powered by the power frame assembly. Its job is to provide the power to the conveyor chain and the spinner gear boxes. A sight glass is installed in each gearbox; this allows the operator to quickly assess the oil level inside the gearbox. The spinner gearboxes are custom made for Doyle; they have been engineered to be long lasting and reliable, in all operating conditions. The spinner gearboxes are painted bright blue. The twin 19-1/4″ spinner dishes are made of heavy duty mild steel. Each spinner dish has three laser cut blade location holes. Four 304 stainless steel blades are bolted into these holes. The blades shape is specifically designed to throw material consistently and evenly. Each blade can be fine tuned by moving it to any one of the three operating locations. The blade locations have been calibrated by Doyle to provide the most consistent spread rates, with the broadest range of materials.

Standard Features: 12 ga. 304 stainless steel hopper construction 2″ x 6″ mild steel tubing frame, with heavy duty mild steel corner braces Bolt on hopper to frame, allows easy hopper removal from frame Heavy duty adjustable hitch Heavy duty 12,000 lb. tongue jack Tandem 8,000 lb. axles, with 8-bolt hubs 14 L x 16.1 Hi-speed implement rib tires 1″ x 1″ mesh type heavy duty 8″ conveyor chain 1″ x 1″ mesh type heavy duty #304 stainless steel conveyor chain, 8″ wide Hydraulically driven twin “dished” spinners, 19-1/4″ diameter with 4 blades per spinner, specially designed for extremely accurate broadcasting of spreader Conveyor driven by press wheel, engaged and disengaged with hydraulic cylinder connected to tractor Inspection window in hopper front Factory assembled & tested Optional Features: PTO Drive System, w/ 29.5 gallon hydraulic tank with temperature gauge, site glass, and large hydraulic filters, metal shot blasted and powder coated bright blue Fitted nylon tarp with grommets Roll Tarp Surge brake system, 1 axle

Standard Features: 14 ga. 409 stainless steel hopper construction, all metal shot blasted and powder coated OR 14 ga. 304 stainless steel hopper construction 2″ x 6″ mild steel tubing frame, with heavy duty mild steel corner braces Bolt on hopper to frame, allows easy hopper removal from frame Heavy duty adjustable hitch Heavy duty 12,000 lb. tongue jack Tandem 8,000 lb. axles, with 8-bolt hubs 14 L x 16.1 Hi-speed implement rib tires 1″ x 1″ mesh type heavy duty 8″ conveyor chain All metal press wheel with hydraulic engagement 31.5 gallon hydraulic tank with temperature gauge, site glass, and large hydraulic filters, metal shot blasted and powder coated bright blue Hydraulic PTO pump, lines, hoses, and fittings Twin dished type spinners, 20-5/16″ diameter with 4 adjustable stainless steel blades

Standard Features: #304 stainless steel hopper construction Bolt together design, hopper to chassis Tandem 10,000 lb. axle suspension, with 8-bolt hubs 19 L x 16.1 tires on W16CH x 16.1 wheels Utilizes two sets of sprockets for conveyor rates 1” x 1” mesh type heavy duty #304 stainless steel conveyor chain, 20” wide Conveyor driven by press wheel, engaged and disengaged with hydraulic cylinder connected to tractor Metering gate sprockets, metering gate, gate slides, and gate shaft manufactured in #304 stainless steel Hydraulically driven twin “dished” spinners, 24” diameter with 4 blades per spinner, specially designed for extremely accurate broadcasting of spreader Factory assembled & tested Optional Features: PTO Drive System, w/ 29.5 gallon hydraulic tank Surge brake system, 1 axle Surge brake system, 2 axles Fitted nylon tarp with grommets Roll Tarp Inspection window in hopper front

Transform your golf course and other sports turf with ease and maneuverability with this versatile piece of machinery. HARDWARE The CRX-320 really is an exceptional mowing experience. With full-width rollers front and rear and 3.2m wide, it produces a precision cut and an outstanding stripe every time. Keeping the rollers as close as possible maximises ground-contour following, with excellent floating capabilities to closely hug the undulating courses of sports turf. The renowned CRX swing tip Gold Cut blades give you a superb cut and make for easy maintenance, while the wide-angle PTO gives you tight-turn capabilities for increased manoeuvrability. All you need is a 35hp tractor and only one spool valve, which makes it economical to operate with the simplest machinery. MAINTENANCE Simple too is the belt tension for quick and easy maintenance and the cutting height adjustment, between 10mm and 100mm, is equally straightforward. Minimal and easy-access grease points and shrouded PTO’s equate to long service intervals. The CRX-320 golf and sports turf mowers are made road-going with an optional highway kit for road-legal towing, so you can easily move from place to place. And with a  3-year warranty , what more could you ask for? The testimony to that is in the build quality, with 5mm steel plate decks making this mower robust and durable, and the aforementioned features that make the CRX-320 the perfect choice for maintaining your golf course or sports turf. You could even say it purrs. CUSTOMER TESTIMONIAL “The clippings dispersal of this machine is so good that we no longer need to use our sweeper collector on the fairways. We now have a spare man for other tasks, and we can use this as a rough-cut or fairway mower, which is fantastic.” –  Leckford golf course FEATURES FULL-WIDTH ROLLERS FRONT & REAR – Precision cut and full-width stripe on the turf COMPACT ROLLER CONFIGURATION – Maximises ground contour following EXCELLENT FLOATING CAPABILITIES – Hugs the undulations closely CRX SWING TIP BLADES – Superb cut and easy maintenance WIDE ANGLE PTO – Zero turn capabilities REQUIRES ONLY 35HP TRACTOR – Economical to operate REQUIRES ONLY ONE DOUBLE ACTING SPOOL VALVE – Complements the simplest tractor TURF TYRES – Minimal turf compaction OPTIONAL HIGHWAY KIT – Allows road-legal towing FINAL BELT DECK DRIVE – For ultimate driveline shock protection SIMPLE BELT CHECK WITHOUT REMOVING THE GUARDS – Quick & easy maintenance 5MM STEEL PLATE DECKS – Robust & durable PROLIFT – Allows simple partial deck lift for crossing paths EASY CUTTING HEIGHT ADJUSTMENT – 10 – 110mm BAFFLES AROUND BLADES – Even grass distribution SPECIFICATIONS Cutting width 3.2m Overall width 3.35m Transport width 2.1m Approx weight 1,360kg Cutting height range 10-110mm No. of cutting spindles 9 Power required 35hp+

Sharing the market-leading features of the Wessex CRX-320 roller turf mower, the 4 metre-wide CRX-400 will increase productivity whilst following the ground contours accurately. Full-width rollers front and rear ensure a prestigious stipe, whilst the compact design maximises the following of ground contours. All you need is a 40hp tractor and only one spool valve, which makes it economical to operate. Maintenance The simplicity of use for this turf mower was a key area of development. Both the belt tension and cutting height adjustment, between 10mm and 100mm, are equally straightforward. Minimal and easy-access grease points and shrouded PTOs equate to long service intervals. The CRX-400 golf and sports turf mowers are made road-going with an optional highway kit for road-legal towing, so you can easily move from place to place. Featuring a 3-year warranty, this turf mower proudly showcases premium build quality, with 5mm steel plate decks and the aforementioned features that make the CRX-400 the perfect choice for maintaining your golf course or sports turf. Features FULL-WIDTH ROLLERS FRONT & REAR – Precision cut and full-width stripe on the turf COMPACT ROLLER CONFIGURATION – Maximises ground contour following EXCELLENT FLOATING CAPABILITIES – Hugs the undulations closely CRX SWING TIP BLADES – Superb cut and easy maintenance WIDE ANGLE PTO – Zero turn capabilities REQUIRES ONLY 40HP TRACTOR – Economical to operate REQUIRES ONLY ONE DOUBLE ACTING SPOOL VALVE – Complements the simplest tractor TURF TYRES – Minimal turf compaction OPTIONAL HIGHWAY KIT – Allows road-legal towing FINAL BELT DECK DRIVE – For ultimate driveline shock protection SIMPLE BELT CHECK WITHOUT REMOVING THE GUARDS – Quick & easy maintenance 5MM STEEL PLATE DECKS – Robust & durable PROLIFT – Allows simple partial deck lift for crossing paths EASY CUTTING HEIGHT ADJUSTMENT – 10 – 110mm BAFFLES AROUND BLADES – Even grass distribution Specifications Cutting width – 4m Overall width – 4.15m Transport width – 2.1m Approx weight – 1,430kg Cutting height range – 10-110mm No. of cutting spindles – 9 Power required – 40hp+

Ideal for collecting core, autumn leaves, grass clippings and scarifying debris etc, the MTC-120-E TURF BEETLE is an effective sweeper that can be towed behind an ATV, utility vehicle, garden tractor or 4×4. Designed for the maintenance of golf courses, private estates, parks and large gardens, the MTC-120-E TURF BEETLE sweeper collector is based on the DUNG BEETLE paddock cleaner but is fitted with a softer bristle to eliminate scratching of sensitive turf. Features 5.5HP ENGINE – Easy to start and reliable THROTTLE LEVER – Clips onto ATV rack for user convenience CENTRIFUGAL CLUTCH – Allows the brush rotor to be engaged/disengaged from the seat WHEELS IN-LINE WITH BRUSH ROTOR – Follows ground contours accurately, giving a consistent clean sweep SIMPLE SCREW HANDLE – Easy adjustment of brush height FULLY CASTORING REAR WHEELS – Increased manoeuvrability FLOATING DRAWBAR – Allows the machine to float over uneven ground with no weight on the ball hitch ADJUSTABLE SPRING TINES – Rake through the grass to loosen stubborn horse muck HAND OPERATED WINCH – For ease of emptying SOFT BRISTLE – Gentle on the turf, stimulates regrowth and is perfect for mowing straight after SWIVELLING BALL HITCH – Satisfies Health and Safety recommendations