Case IH, Doyle Mfg., Redexim, Hustler, Traqnology - Lely

The floating twin spike rollers of the Multi-Seeder follow the contours, saturating the surface with small holes. The seed is then accurately distributed onto the surface before an adjustable brush sweeps the seeds into the holes. The rear roller then passed over to cover the seed for germination. Infinitely adjustable seed rates Front rollers can be set to fixed or float depending on surface types Hectare meter details area covered Operation Tractor pulled Working width (m) 1.6 Working width (inch) 63 Max. Working depth (mm) 5 - 20 Max. Working depth (inch) 0.2 - 0.8 Max. Working speed (km h) 12 Max. Working speed (mph) 7.5 Weight (kg) 750 Weight (lbs) 1653 Hopper capacity (L) 200 Hopper capacity (cu.ft.) 7.1 Min. Tractor HP required 35 Min. Lifting capacity 610 mm behind the lifting eyes (kg) 1280 Min. Lifting capacity 24 inch behind the lifting eyes (lbs) 2822 Min. Pressure (bar) 1 - 2 Min. Pressure (psi) 14.5 - 29 Three-point hitch 3-point CAT 1-2 Lubricant EP2

The punch-action Verti-Core III quickly cores turf surfaces while hold-down plates ensures no damage is caused to the surface in the process; Its belt drive systems ensure a high work-rate & neat hole pattern. The working depth can be easily adjusted as required by ground conditions and operators. High-Speed Optional side or top-eject tines Working width (m) 1.6 Working width (inch) 63 Max. Working depth (mm) 100 Max. Working depth (inch) 4 Weight (kg) 846 Weight (lbs) 1865 Hole spacing distance driving direction (mm) 25 - 110 Hole spacing distance driving direction (inch) 1 - 4.3 Min. Tractor HP required 45 Min. Lifting capacity 610 mm behind the lifting eyes (kg) 1000 Min. Lifting capacity 24 inch behind the lifting eyes (lbs) 2205 Three-point hitch 3-Point CAT 1 Rpm Max. 540 Gearbox oil SAE 90 Lubricant EP 2

Hustler's Super 104™ can easily handle acres of work. Offering a 104" width of cut, zero-turn precision and up to an impressive 11 mph speed, this machine is in a class by itself. 38.5HP Kawasaki 104" deck Up to 11 mph mowing speed 5 Year / 1200 Hour (First 2 Years No Hour Limit) View Specifications

Standard Features: 14 ga. 304 stainless steel hopper construction 2” x 6” mild steel tubing frame, with heavy duty mild steel corner braces Bolt on hopper to frame, allows easy hopper removal from frame Heavy duty adjustable hitch Heavy duty 8,000 lb. tongue jack Single 7,000 lb. Henschen axle, with 6-bolt hubs 36 x 13.5 / 15 Multi turf tires 1” x 1” mesh type heavy duty 8” conveyor chain All metal press wheel with manual engagement Twin dished type spinners, 19-1/4” diameter with 4 adjustable stainless steel blades Main gearbox and spinner mount assemblies are 304 stainless steel Factory assembled & tested Optional Features: Hydraulic press wheel engagement includes springs, cylinder, and hydraulic hoses Hydraulically driven spinner assembly, with flow control Fitted nylon tarp with grommets Roll Tarp Inspection window in hopper front The Doyle 2 Ton Ground Wheel Drive Spreader was designed for fertilizing food plots, golf courses, and other turf type applications. The modular design allows Doyle to customize the units to fit your needs; this means that your spreader is no longer a disposable unit. If in the years to come a part fails or wears out, it can be quickly repaired or replaced. This includes the hopper, frame, axle, and all drive assemblies. Our hoppers are constructed of 14 ga. 304 stainless steel. Each hopper is laser cut and jig built to precise measurements; this allows every hopper to fit every frame accurately. A chemical baffle is added inside the hopper; this keeps the material from “bridging” and reduces the amount of weight on the conveyor chain. As with all Doyle products, the hopper seams are continuously welded inside and out. Doyle's unique bin design is easily removable from the frame; just 4 bolts and special box washers hold the hoppers to the frames. The frame assembly is made of heavy duty mild steel; it was designed to be rugged and twist resistant. Doyle's frame consists of a mild steel tubing base, with heavy duty mild steel corner braces. Doyle's corner braces are laser cut, and jig built, that means that every hopper fits on every frame. All frame surfaces are “boxed” to minimize the areas that corrosive materials can be trapped. This allows the operator to easily wash the unit off after use. The frame is metal shot blasted and powder coated bright blue. Each frame uses Henschen axle, multi trac turf tires, adjustable height hitch, and a heavy duty tongue jack. The standard drive system consists of manual engagement assembly, power frame assembly, main gearbox assembly, spinner gearboxes, and spinner dishes. The manual engagement assembly is used to engage and disengage the drive system. The assembly is made of heavy duty mild steel, has CNC machined parts, is metal shot blasted, and powder coated bright blue. An optional hydraulic engagement system is available. The power frame assembly uses a combination of CNC machined parts and laser cut parts, and is jig built. The power frame assembly transfers power from the units tires to the gearbox assembly. The assembly has a uniquely designed power wheel. When engaged, this wheel grips the tire, and produces a slip-free connection, in most cases. If surface moisture or mud is a problem, an optional mud tire and power wheel combination is available for 5 ton unit only. The main gearbox assembly consists of specialized gears and sprockets enclosed in a heavy duty gear case. The gear case is made of 304 stainless steel. Each gearbox has laser cut parts and is jig assembled, making for a virtually leak proof case. The gearbox is powered by the power frame assembly. Its job is to provide the power to the conveyor chain and the spinner gear boxes. A sight glass is installed in each gearbox; this allows the operator to quickly assess the oil level inside the gearbox. The spinner gearboxes are custom made for Doyle; they have been engineered to be long lasting and reliable, in all operating conditions. The spinner gearboxes are painted bright blue. The twin 19-1/4″ spinner dishes are made of heavy duty mild steel. Each spinner dish has three laser cut blade location holes. Four 304 stainless steel blades are bolted into these holes. The blades shape is specifically designed to throw material consistently and evenly. Each blade can be fine tuned by moving it to any one of the three operating locations. The blade locations have been calibrated by Doyle to provide the most consistent spread rates, with the broadest range of materials.

Standard Features: 14 ga. 304 stainless steel hopper construction 2″ x 6″ mild steel tubing frame, with heavy duty mild steel corner braces and 4″ x 6″ tubing tongue Bolt on hopper to frame, allows easy hopper removal from frame Heavy duty adjustable hitch Heavy duty 12,000 lb. tongue jack Single spindle design, with 8-bolt hubs 11.25 – 24SL implement rib tires 1″ x 1″ mesh type heavy duty 8″ conveyor chain All metal double press wheel with manual / hydraulic engagement, includes cylinder and hoses Twin dished type spinners, 19-1/4″ diameter with 4 adjustable stainless steel blades Tire hubs are reversible, providing 30″ or 38″ row spacing Inspection window in hopper front (standard on mid-clearance units only) Main gearbox and spinner mount assemblies are 304 stainless steel Factory assembled & tested Our 5 and 6 Ton Ground Wheel Drive Spreaders have the best features, and are the most durable spreaders on the market today. The modular design allows Doyle to customize the units to your needs, this means that your spreader is no longer a disposable unit. If in the years to come a part fails or wears out, it can be quickly repaired or replaced. This includes the hopper, frame, axles, and all drive assemblies. Our hoppers are constructed of either 14 ga. 409 stainless steel or 14 ga. 304 stainless steel. Each hopper is laser cut and jig built to precise measurements; this allows every hopper to fit every frame accurately. A chemical baffle is added inside the hopper; this keeps the material from “bridging” and reduces the amount of weight on the conveyor chain. As with all Doyle products, the hopper seams are continuously welded inside and out. The 409 hoppers are metal shot blasted and powder coated white. Doyle's unique bin design is easily removable from the frame; just 4 bolts and special box washers hold the hoppers to the frames. The frame assembly is made of heavy duty mild steel; it was designed to be rugged and twist resistant. Doyle's frame consists of a mild steel tubing base, with heavy duty mild steel corner braces. Doyle's corner braces are laser cut, and jig built, that means that every hopper fits on every frame. All frame surfaces are “boxed” to minimize the areas that corrosive materials can be trapped. This allows the operator to easily wash the unit off after use. The frame is metal shot blasted and powder coated bright blue. Each frame uses tandem Henschen axles, ribbed highway implement tires, adjustable height hitch, and a heavy duty tongue jack. The standard drive system consists of manual engagement assembly, power frame assembly, main gearbox assembly, spinner gearboxes, and spinner dishes. The manual engagement assembly is used to engage and disengage the drive system. The assembly is made of heavy duty mild steel, has CNC machined parts, is metal shot blasted, and powder coated bright blue. An optional hydraulic engagement system is available. The power frame assembly uses a combination of CNC machined parts and laser cut parts, and is jig built. The power frame assembly transfers power from the units tires to the gearbox assembly. The assembly has a uniquely designed power wheel. When engaged, this wheel grips the tire, and produces a slip-free connection, in most cases. If surface moisture or mud is a problem, an optional mud tire and power wheel combination is available for 5 ton unit only. The main gearbox assembly consists of specialized gears and sprockets enclosed in a heavy duty gear case. The gear case is made of 304 stainless steel, when the 304 stainless steel hopper is used. It is constructed of mild steel, when the 409 stainless steel hopper is used. The mild steel gear case is metal shot blasted, and powder coated bright blue. Each gearbox has laser cut parts and is jig assembled, making for a virtually leak proof case. The gearbox is powered by the power frame assembly. Its job is to provide the power to the conveyor chain and the spinner gear boxes. A sight glass is installed in each gearbox; this allows the operator to quickly assess the oil level inside the gearbox. The spinner gearboxes are custom made for Doyle; they have been engineered to be long lasting and reliable, in all operating conditions. The spinner gearboxes are painted bright blue. The twin 19-1/4″ spinner dishes are made of heavy duty mild steel. Each spinner dish has three laser cut blade location holes. Four 304 stainless steel blades are bolted into these holes. The blades shape is specifically designed to throw material consistently and evenly. Each blade can be fine tuned by moving it to any one of the three operating locations. The blade locations have been calibrated by Doyle to provide the most consistent spread rates, with the broadest range of materials.

Standard Features: 12 ga. 304 stainless steel hopper construction 2″ x 6″ mild steel tubing frame, with heavy duty mild steel corner braces Bolt on hopper to frame, allows easy hopper removal from frame Heavy duty adjustable hitch Heavy duty 12,000 lb. tongue jack Tandem 8,000 lb. axles, with 8-bolt hubs 14 L x 16.1 Hi-speed implement rib tires 1″ x 1″ mesh type heavy duty 8″ conveyor chain 1″ x 1″ mesh type heavy duty #304 stainless steel conveyor chain, 8″ wide Hydraulically driven twin “dished” spinners, 19-1/4″ diameter with 4 blades per spinner, specially designed for extremely accurate broadcasting of spreader Conveyor driven by press wheel, engaged and disengaged with hydraulic cylinder connected to tractor Inspection window in hopper front Factory assembled & tested Optional Features: PTO Drive System, w/ 29.5 gallon hydraulic tank with temperature gauge, site glass, and large hydraulic filters, metal shot blasted and powder coated bright blue Fitted nylon tarp with grommets Roll Tarp Surge brake system, 1 axle

Standard Features: 14 ga. 409 stainless steel hopper construction, all metal shot blasted and powder coated OR 14 ga. 304 stainless steel hopper construction 2″ x 6″ mild steel tubing frame, with heavy duty mild steel corner braces Bolt on hopper to frame, allows easy hopper removal from frame Heavy duty adjustable hitch Heavy duty 12,000 lb. tongue jack Tandem 8,000 lb. axles, with 8-bolt hubs 14 L x 16.1 Hi-speed implement rib tires 1″ x 1″ mesh type heavy duty 8″ conveyor chain All metal press wheel with hydraulic engagement 31.5 gallon hydraulic tank with temperature gauge, site glass, and large hydraulic filters, metal shot blasted and powder coated bright blue Hydraulic PTO pump, lines, hoses, and fittings Twin dished type spinners, 20-5/16″ diameter with 4 adjustable stainless steel blades

Standard Features: #304 stainless steel hopper construction Bolt together design, hopper to chassis Tandem 10,000 lb. axle suspension, with 8-bolt hubs 19 L x 16.1 tires on W16CH x 16.1 wheels Utilizes two sets of sprockets for conveyor rates 1” x 1” mesh type heavy duty #304 stainless steel conveyor chain, 20” wide Conveyor driven by press wheel, engaged and disengaged with hydraulic cylinder connected to tractor Metering gate sprockets, metering gate, gate slides, and gate shaft manufactured in #304 stainless steel Hydraulically driven twin “dished” spinners, 24” diameter with 4 blades per spinner, specially designed for extremely accurate broadcasting of spreader Factory assembled & tested Optional Features: PTO Drive System, w/ 29.5 gallon hydraulic tank Surge brake system, 1 axle Surge brake system, 2 axles Fitted nylon tarp with grommets Roll Tarp Inspection window in hopper front

1212 FBL Overhead Drag Conveyors 1214 FBL Overhead Drag Conveyors Standard Features:  Head Section 3/16” #304 stainless steel shell construction Bolt on #304 top cover Heavy duty stainless steel reversable motor mount, bolt-on design for access to drive sprocket TEFC Motor, motor size depends on length, available sizes are: 5 HP thru 40 HP Heavy duty shaft mounted gearbox Heavy four bolt bearings, with UHMW dust seals Heavy duty drive sprocket Intermediate (Straight) Sections Available in lengths from 1’ to 9’-10”(10’), in 6” increments 12 ga. #304 stainless steel “u” trough sections Bolt on top covers Heavy duty #304 1 1/2 angle bolt flanges UHMW return rollers, with stainless steel shafts Drop Door Sections Standard doors for filling indoor bins 12 ga. #304 stainless steel shell construction #304 door handles, latches, hinges, and catches with one hand operation Large 42” long opening, to reduce carry over UHMW return rollers, with stainless steel shafts Inlet Hopper Section 12 ga. #304 stainless steel construction Avaliable with round or square spouting connection Tail Section 10 ga. #304 stainless steel shell construction Bolt on #304 top cover #304 stainless steel take-up bolts Heavy bearings, mounted on #304 stainless steel take-up mounts Heavy duty tail sprocket Chain & Paddles XH88 Heavy Duty Pintle Chain, with paddle attachment every foot 5/8” thick UHMW paddle Optional Features: Available with enclosed doors for applications outside applications (above roof) or where material needs to be spouted to a desired location Stainless steel square to round transitions, flange rings, clamp bands, & spouting