Case IH, Redexim, Jacobsen - Doyle Mfg.

Width of Cut: 124 inch (315.0 cm) Hours: 3115 Year: 2014

Available with a 32.5 hp gas engine or a 24.8 hp diesel engine and optional four-wheel drive, no job is too challenging to overcome. Built for never settlers, the Truckster XD's 23.6-cubic-feet heavy gauge steel bed and 3,500-lb cargo load capacity makes for effortless hauling and unmatched productivity. Integrated Stake Pockets and Tie-Downs Take on the most strenuous tasks and secure large equipment with integrated heavy gauge steel stake pockets and tie-downs throughout the cargo bed. Hydraulic Bed Lift Add ease to you worday and heighten productivity  with the standard hydraulic bed lift to raise and lower up to 3,500-lb of cargo. ROPS Accessories Safeguard your workers by preparing for unforeseen circumstances with optional roll-over protection accessories such as a two or four-post canopy or premium suspension seats. Optional 4WD Rigorous jobs with rough terrain and steep hills are no match for four-wheel drive capability.

The redesigned Overseeder 3D 1575 features an all-new seed delivery mechanism with single-point adjustment. The tough discs cut grooves in the soil for seed to be accurately placed before the roller closes the groove to cover the seed. This durable seeder is well suited to a range of surface types. Excellent germination rates Adjustable seed aperature for a range of seed types Digital meter SKU 122.157.502 Working width (m) 1.58 Working width (inch) 62.2 Max. Working depth (mm) 20 Max. Working depth (inch) 0.78 Max. Working speed (km h) 12 Max. Working speed (mph) 7.5 Weight (kg) 1184 Weight (lbs) 2610 Sowing distance (mm) 75 Sowing distance (inch) 2.9 Hopper capacity (L) 276 Hopper capacity (cu.ft.) 9.7 Number of seeding elements 21 Min. Tractor HP required 40 Min. Lifting capacity 610 mm behind the lifting eyes (kg) 1300 Min. Lifting capacity 24 inch behind the lifting eyes (lbs) 2866 Max. capacity ( m² hr) 18.900 Max. capacity (ft² hr) 203.438 Three-point hitch 3-point CAT 1-2 Lubricant EP2

The floating twin spike rollers of the Multi-Seeder follow the contours, saturating the surface with small holes. The seed is then accurately distributed onto the surface before an adjustable brush sweeps the seeds into the holes. The rear roller then passed over to cover the seed for germination. Infinitely adjustable seed rates Front rollers can be set to fixed or float depending on surface types Hectare meter details area covered Operation Tractor pulled Working width (m) 1.6 Working width (inch) 63 Max. Working depth (mm) 5 - 20 Max. Working depth (inch) 0.2 - 0.8 Max. Working speed (km h) 12 Max. Working speed (mph) 7.5 Weight (kg) 750 Weight (lbs) 1653 Hopper capacity (L) 200 Hopper capacity (cu.ft.) 7.1 Min. Tractor HP required 35 Min. Lifting capacity 610 mm behind the lifting eyes (kg) 1280 Min. Lifting capacity 24 inch behind the lifting eyes (lbs) 2822 Min. Pressure (bar) 1 - 2 Min. Pressure (psi) 14.5 - 29 Three-point hitch 3-point CAT 1-2 Lubricant EP2

The punch-action Verti-Core III quickly cores turf surfaces while hold-down plates ensures no damage is caused to the surface in the process; Its belt drive systems ensure a high work-rate & neat hole pattern. The working depth can be easily adjusted as required by ground conditions and operators. High-Speed Optional side or top-eject tines Working width (m) 1.6 Working width (inch) 63 Max. Working depth (mm) 100 Max. Working depth (inch) 4 Weight (kg) 846 Weight (lbs) 1865 Hole spacing distance driving direction (mm) 25 - 110 Hole spacing distance driving direction (inch) 1 - 4.3 Min. Tractor HP required 45 Min. Lifting capacity 610 mm behind the lifting eyes (kg) 1000 Min. Lifting capacity 24 inch behind the lifting eyes (lbs) 2205 Three-point hitch 3-Point CAT 1 Rpm Max. 540 Gearbox oil SAE 90 Lubricant EP 2

Jacobsen GP400

Available exclusively with a proven ELiTE lithium drivetrain powered by Samsung SDI lithium technology, the SLF1 attains 5.5+ hours of operation with each charge. The on-board charger re-powers overnight, and Jake’s most advanced on-board monitoring system ensures product uptime, lockable speed and frequency of clip controls. View Specifications

Standard Features: 14 ga. 304 stainless steel hopper construction 2” x 6” mild steel tubing frame, with heavy duty mild steel corner braces Bolt on hopper to frame, allows easy hopper removal from frame Heavy duty adjustable hitch Heavy duty 8,000 lb. tongue jack Single 7,000 lb. Henschen axle, with 6-bolt hubs 36 x 13.5 / 15 Multi turf tires 1” x 1” mesh type heavy duty 8” conveyor chain All metal press wheel with manual engagement Twin dished type spinners, 19-1/4” diameter with 4 adjustable stainless steel blades Main gearbox and spinner mount assemblies are 304 stainless steel Factory assembled & tested Optional Features: Hydraulic press wheel engagement includes springs, cylinder, and hydraulic hoses Hydraulically driven spinner assembly, with flow control Fitted nylon tarp with grommets Roll Tarp Inspection window in hopper front The Doyle 2 Ton Ground Wheel Drive Spreader was designed for fertilizing food plots, golf courses, and other turf type applications. The modular design allows Doyle to customize the units to fit your needs; this means that your spreader is no longer a disposable unit. If in the years to come a part fails or wears out, it can be quickly repaired or replaced. This includes the hopper, frame, axle, and all drive assemblies. Our hoppers are constructed of 14 ga. 304 stainless steel. Each hopper is laser cut and jig built to precise measurements; this allows every hopper to fit every frame accurately. A chemical baffle is added inside the hopper; this keeps the material from “bridging” and reduces the amount of weight on the conveyor chain. As with all Doyle products, the hopper seams are continuously welded inside and out. Doyle's unique bin design is easily removable from the frame; just 4 bolts and special box washers hold the hoppers to the frames. The frame assembly is made of heavy duty mild steel; it was designed to be rugged and twist resistant. Doyle's frame consists of a mild steel tubing base, with heavy duty mild steel corner braces. Doyle's corner braces are laser cut, and jig built, that means that every hopper fits on every frame. All frame surfaces are “boxed” to minimize the areas that corrosive materials can be trapped. This allows the operator to easily wash the unit off after use. The frame is metal shot blasted and powder coated bright blue. Each frame uses Henschen axle, multi trac turf tires, adjustable height hitch, and a heavy duty tongue jack. The standard drive system consists of manual engagement assembly, power frame assembly, main gearbox assembly, spinner gearboxes, and spinner dishes. The manual engagement assembly is used to engage and disengage the drive system. The assembly is made of heavy duty mild steel, has CNC machined parts, is metal shot blasted, and powder coated bright blue. An optional hydraulic engagement system is available. The power frame assembly uses a combination of CNC machined parts and laser cut parts, and is jig built. The power frame assembly transfers power from the units tires to the gearbox assembly. The assembly has a uniquely designed power wheel. When engaged, this wheel grips the tire, and produces a slip-free connection, in most cases. If surface moisture or mud is a problem, an optional mud tire and power wheel combination is available for 5 ton unit only. The main gearbox assembly consists of specialized gears and sprockets enclosed in a heavy duty gear case. The gear case is made of 304 stainless steel. Each gearbox has laser cut parts and is jig assembled, making for a virtually leak proof case. The gearbox is powered by the power frame assembly. Its job is to provide the power to the conveyor chain and the spinner gear boxes. A sight glass is installed in each gearbox; this allows the operator to quickly assess the oil level inside the gearbox. The spinner gearboxes are custom made for Doyle; they have been engineered to be long lasting and reliable, in all operating conditions. The spinner gearboxes are painted bright blue. The twin 19-1/4″ spinner dishes are made of heavy duty mild steel. Each spinner dish has three laser cut blade location holes. Four 304 stainless steel blades are bolted into these holes. The blades shape is specifically designed to throw material consistently and evenly. Each blade can be fine tuned by moving it to any one of the three operating locations. The blade locations have been calibrated by Doyle to provide the most consistent spread rates, with the broadest range of materials.

Standard Features: 14 ga. 304 stainless steel hopper construction 2″ x 6″ mild steel tubing frame, with heavy duty mild steel corner braces and 4″ x 6″ tubing tongue Bolt on hopper to frame, allows easy hopper removal from frame Heavy duty adjustable hitch Heavy duty 12,000 lb. tongue jack Single spindle design, with 8-bolt hubs 11.25 – 24SL implement rib tires 1″ x 1″ mesh type heavy duty 8″ conveyor chain All metal double press wheel with manual / hydraulic engagement, includes cylinder and hoses Twin dished type spinners, 19-1/4″ diameter with 4 adjustable stainless steel blades Tire hubs are reversible, providing 30″ or 38″ row spacing Inspection window in hopper front (standard on mid-clearance units only) Main gearbox and spinner mount assemblies are 304 stainless steel Factory assembled & tested Our 5 and 6 Ton Ground Wheel Drive Spreaders have the best features, and are the most durable spreaders on the market today. The modular design allows Doyle to customize the units to your needs, this means that your spreader is no longer a disposable unit. If in the years to come a part fails or wears out, it can be quickly repaired or replaced. This includes the hopper, frame, axles, and all drive assemblies. Our hoppers are constructed of either 14 ga. 409 stainless steel or 14 ga. 304 stainless steel. Each hopper is laser cut and jig built to precise measurements; this allows every hopper to fit every frame accurately. A chemical baffle is added inside the hopper; this keeps the material from “bridging” and reduces the amount of weight on the conveyor chain. As with all Doyle products, the hopper seams are continuously welded inside and out. The 409 hoppers are metal shot blasted and powder coated white. Doyle's unique bin design is easily removable from the frame; just 4 bolts and special box washers hold the hoppers to the frames. The frame assembly is made of heavy duty mild steel; it was designed to be rugged and twist resistant. Doyle's frame consists of a mild steel tubing base, with heavy duty mild steel corner braces. Doyle's corner braces are laser cut, and jig built, that means that every hopper fits on every frame. All frame surfaces are “boxed” to minimize the areas that corrosive materials can be trapped. This allows the operator to easily wash the unit off after use. The frame is metal shot blasted and powder coated bright blue. Each frame uses tandem Henschen axles, ribbed highway implement tires, adjustable height hitch, and a heavy duty tongue jack. The standard drive system consists of manual engagement assembly, power frame assembly, main gearbox assembly, spinner gearboxes, and spinner dishes. The manual engagement assembly is used to engage and disengage the drive system. The assembly is made of heavy duty mild steel, has CNC machined parts, is metal shot blasted, and powder coated bright blue. An optional hydraulic engagement system is available. The power frame assembly uses a combination of CNC machined parts and laser cut parts, and is jig built. The power frame assembly transfers power from the units tires to the gearbox assembly. The assembly has a uniquely designed power wheel. When engaged, this wheel grips the tire, and produces a slip-free connection, in most cases. If surface moisture or mud is a problem, an optional mud tire and power wheel combination is available for 5 ton unit only. The main gearbox assembly consists of specialized gears and sprockets enclosed in a heavy duty gear case. The gear case is made of 304 stainless steel, when the 304 stainless steel hopper is used. It is constructed of mild steel, when the 409 stainless steel hopper is used. The mild steel gear case is metal shot blasted, and powder coated bright blue. Each gearbox has laser cut parts and is jig assembled, making for a virtually leak proof case. The gearbox is powered by the power frame assembly. Its job is to provide the power to the conveyor chain and the spinner gear boxes. A sight glass is installed in each gearbox; this allows the operator to quickly assess the oil level inside the gearbox. The spinner gearboxes are custom made for Doyle; they have been engineered to be long lasting and reliable, in all operating conditions. The spinner gearboxes are painted bright blue. The twin 19-1/4″ spinner dishes are made of heavy duty mild steel. Each spinner dish has three laser cut blade location holes. Four 304 stainless steel blades are bolted into these holes. The blades shape is specifically designed to throw material consistently and evenly. Each blade can be fine tuned by moving it to any one of the three operating locations. The blade locations have been calibrated by Doyle to provide the most consistent spread rates, with the broadest range of materials.