close
Categories
Filter By
Brand
- ABI1
- B&B Technologies2
- B&B Trailers7
- Capillary Flow1
- Case IH6
- Continental818
- Dalton Ag7
- Doyle Mfg.47
- GSI InterSystems4
- Hustler1
- Jacobsen27
- Lely7
- Peterson's Dust Solutions2
- Precision Tank8
- Progressive Turf Equipment4
- Quality Steel1
- Rain Bird285
- Redexim3
- Simonsen7
- Smithco16
- Squibb Taylor5113
- Steiner1
- Traqnology1
- TriArc1
- Turfco12
- Wessex3
- Yanmar6
Price
Product Type
Jacobsen, Doyle Mfg., Traqnology, TriArc, Case IH, Quality Steel, Capillary Flow, GSI InterSystems - Lely
95 items
Jacobsen AR722 Rotary Mower
URM791
Width of Cut: 124 inch (315.0 cm) Hours: 3115 Year: 2014
- USD
Truckster XD
TrucksterXD
Available with a 32.5 hp gas engine or a 24.8 hp diesel engine and optional four-wheel drive, no job is too challenging to overcome. Built for never settlers, the Truckster XD's 23.6-cubic-feet heavy gauge steel bed and 3,500-lb cargo load capacity makes for effortless hauling and unmatched productivity. Integrated Stake Pockets and Tie-Downs Take on the most strenuous tasks and secure large equipment with integrated heavy gauge steel stake pockets and tie-downs throughout the cargo bed. Hydraulic Bed Lift Add ease to you worday and heighten productivity with the standard hydraulic bed lift to raise and lower up to 3,500-lb of cargo. ROPS Accessories Safeguard your workers by preparing for unforeseen circumstances with optional roll-over protection accessories such as a two or four-post canopy or premium suspension seats. Optional 4WD Rigorous jobs with rough terrain and steep hills are no match for four-wheel drive capability.
- USD
Jacobsen GP400 Greens Mower
URG846
Jacobsen GP400
- USD
SLF1- Lithium Greens Mower
SLF1
Available exclusively with a proven ELiTE lithium drivetrain powered by Samsung SDI lithium technology, the SLF1 attains 5.5+ hours of operation with each charge. The on-board charger re-powers overnight, and Jake’s most advanced on-board monitoring system ensures product uptime, lockable speed and frequency of clip controls. View Specifications
- USD
NH3 Tanks
94351568
Tank Features: Standard 1-1/2" liquid withdrawal valve(s) Standard stainless steel float gauge All tanks equipped with heavy-duty base legs 41", 46" diameter tanks coated with ArcClad (primer, topcoat) 60", and 72" diameter tanks coated with Acrylic Polyurethane Conforms to ASME code, Section VIII, Div 1 Complies with CGA G-2.1 Registered with the National Board View Specifications
- USD
Anhydrous Ammonia (NH3) Tanks
QSAAT
1,000- 2,000 WG Capacity Specifications Stringently manufactured to the requirements of the ASME code for your safety Engineered roll-over cage with heavier steel and greater accessibility to valves Roll-over cage mounted on welding pads for maximum strength and is field repairable 30% more working clearance from liquid withdrawal valve and safety handle Seal welded stainless steel data plate mounted on pads and away from hose connections for longer life Superior leg design that is stronger, field repairable, mounted on a welding pad Precise fit before weld with 100% x-ray of long-seam welds Advanced powder paint coating to resist exterior corrosion All tanks are fully stress relieved to help alleviate stress corrosion All tanks are vacuum purged Standard tanks are shipped with stainless steel float gauges, water bottle attachments and two drain plugs A three-year limited warranty is in place along with the largest, most experienced sales and customer support team View Specifications
- USD
FBL Overhead Drag Conveyor
1212 & 1214
1212 FBL Overhead Drag Conveyors 1214 FBL Overhead Drag Conveyors Standard Features: Head Section 3/16” #304 stainless steel shell construction Bolt on #304 top cover Heavy duty stainless steel reversable motor mount, bolt-on design for access to drive sprocket TEFC Motor, motor size depends on length, available sizes are: 5 HP thru 40 HP Heavy duty shaft mounted gearbox Heavy four bolt bearings, with UHMW dust seals Heavy duty drive sprocket Intermediate (Straight) Sections Available in lengths from 1’ to 9’-10”(10’), in 6” increments 12 ga. #304 stainless steel “u” trough sections Bolt on top covers Heavy duty #304 1 1/2 angle bolt flanges UHMW return rollers, with stainless steel shafts Drop Door Sections Standard doors for filling indoor bins 12 ga. #304 stainless steel shell construction #304 door handles, latches, hinges, and catches with one hand operation Large 42” long opening, to reduce carry over UHMW return rollers, with stainless steel shafts Inlet Hopper Section 12 ga. #304 stainless steel construction Avaliable with round or square spouting connection Tail Section 10 ga. #304 stainless steel shell construction Bolt on #304 top cover #304 stainless steel take-up bolts Heavy bearings, mounted on #304 stainless steel take-up mounts Heavy duty tail sprocket Chain & Paddles XH88 Heavy Duty Pintle Chain, with paddle attachment every foot 5/8” thick UHMW paddle Optional Features: Available with enclosed doors for applications outside applications (above roof) or where material needs to be spouted to a desired location Stainless steel square to round transitions, flange rings, clamp bands, & spouting
- USD
Flight Star Incline Drag Conveyor
1212 & 1616
1212 Flightstar Drag Conveyors 120 tons per hour 1616 Flightstar Drag Conveyors 200 tons per hour Standard Features: Head Section 3/16” #304 stainless steel shell construction 10 ga. #304 stainless steel divider (wear) pan Bolt on #304 top cover Heavy duty stainless steel tubing motor mount, bolt-on design for access to drive sprocket TEFC Motor, motor size depends on length, available sizes are: 5 HP thru 100 HP Heavy duty shaft mounted gearbox Heavy pillow block bearings, mounted on #304 stainless steel mounts Heavy duty drive sprocket Stainless steel discharge to 10” round or 12” square Intermediate (Straight) Sections Available in lengths from 1’ to 9’-10”(10’), in 6” increments 12 ga. #304 stainless steel “u” trough sections 12 ga. #304 stainless steel divider (wear) pan, bolt-in design for easy cleaning Bolt on top covers Heavy duty #304 1 1/2 angle bolt flanges Curve Section Available in angles from 10 degrees to 60 degrees, in 5 degree increments 10 ga. #304 stainless steel side plates 10 ga. #304 stainless steel divider (wear) pan Bolt on top covers Heavy duty #304 bolt flanges Hopper Section Available in lengths from 2’, 3’, 4’ increments 12 ga. #304 stainless steel shell construction 12 ga. #304 stainless steel divider (wear) pan #304 stainless steel weight breaker Heavy duty #304 1 1/2″ angle bolt flanges #304 stainless steel adjustable flow control gates Tail Section 3/16” #304 stainless steel shell construction 10 ga. #304 stainless steel divider (wear) pan Bolt on #304 top cover #304 stainless steel take-up bolts Heavy bearings, mounted on #304 stainless steel take-up mounts Heavy duty tail sprocket Chain & Paddles XH88 Heavy Duty Pintle Chain, with paddle attachment every foot 5/8” thick UHMW paddle Optional Features: Pit drive over grates Mild steel support stands, available from 2’ tall thru 40’ tall Stainless steel square to round transitions, flange rings, clamp bands, & spouting Rubber pit cover Air drop doors
- USD
Field Loader Conveyor
FLC1113
The Doyle Field Loader Conveyor (FLC) is today’s answer to your remote fertilizer or grain loading application. It’s completely portable and has a self contained 20 h.p. Honda gas engine, with hydraulic pump and motor. This allows you adjust the 24″ belt speed from 0 to 550 fpm. Adjustable belt speed, along with the optional adjustable discharge chute means you can “throw” material off the end of the conveyor, or direct it straight down for precise loading control. The standard FLC has a 35′ over all length, with a 10′ horizontal section, and a 25′ incline section. The FLC is constructed of 304 stainless steel, with a mild steel undercarriage. The 10′ horizontal section is 6″ deep and fits under most rail cars and trucks to save the added expense of a separate undercar conveyor. The 13′-6″ discharge height makes it easy to fill transport or floater trucks. Heavy gauge, 304 stainless steel channel construction builds in the durability you need at a price you can afford. The FLC is exactly balanced for easy one man hook-up. Mild steel square tube undercarriage, with an 80″ wheel base gives it excellent stability in transport. Undercarriage bead blasted and powder coated red. Our Doyle Field Loader Conveyor is the highest quality, field loader conveyor on the market today. We offer the best warranty, the best options, extra heavy duty construction, factory delivery / set-up. Contact us today for assistance in meeting your mixing or bulk handling needs. We are always happy to help you decide which products and options best fit into your operation. We can also custom design a system for your needs. You will be glad you decided on Doyle, home of Worldwide Quality Blending, Conveying, Tending, and Spreading Products! Standard Features: 24″ wide Crescent top belt, with stainless steel lacing 20HP Honda gas engine Up to 150 tons per hr. discharge rate (based on 60 lb. per cu. ft. material) Crowned and lagged drive and idler pull Square tubing style take-up assemblies 2″ steel return rollers 1″ bearings throughout Direct head drive 6 gallon metal gas tank 17 gallon metal hydraulic tank 215/75R 15″ Tires Tow hitch Optional Features: Adjustable discharge spout 12″ Round, fully enclosed, discharge spout Stainless steel weather covers 4′ Adjustable folding hopper 15 h.p. electric motor driving a hydraulic pump and motor Kubota D722 diesel engine, in lieu of 20 h.p. Honda gas engine Hydraulic self propelled undercarriage Conveyor can be built to run straight off tractor hydraulics. Note: This option still includes hydraulic lines and hoses to hydraulic motor. Also includes flow control to regulate output speed. Stainless undercarriage 5′ Extension for discharge end
- USD