Progressive Turf Equipment, Doyle Mfg. - GSI InterSystems

Standard Features: 14 ga. 304 stainless steel hopper construction 2” x 6” mild steel tubing frame, with heavy duty mild steel corner braces Bolt on hopper to frame, allows easy hopper removal from frame Heavy duty adjustable hitch Heavy duty 8,000 lb. tongue jack Single 7,000 lb. Henschen axle, with 6-bolt hubs 36 x 13.5 / 15 Multi turf tires 1” x 1” mesh type heavy duty 8” conveyor chain All metal press wheel with manual engagement Twin dished type spinners, 19-1/4” diameter with 4 adjustable stainless steel blades Main gearbox and spinner mount assemblies are 304 stainless steel Factory assembled & tested Optional Features: Hydraulic press wheel engagement includes springs, cylinder, and hydraulic hoses Hydraulically driven spinner assembly, with flow control Fitted nylon tarp with grommets Roll Tarp Inspection window in hopper front The Doyle 2 Ton Ground Wheel Drive Spreader was designed for fertilizing food plots, golf courses, and other turf type applications. The modular design allows Doyle to customize the units to fit your needs; this means that your spreader is no longer a disposable unit. If in the years to come a part fails or wears out, it can be quickly repaired or replaced. This includes the hopper, frame, axle, and all drive assemblies. Our hoppers are constructed of 14 ga. 304 stainless steel. Each hopper is laser cut and jig built to precise measurements; this allows every hopper to fit every frame accurately. A chemical baffle is added inside the hopper; this keeps the material from “bridging” and reduces the amount of weight on the conveyor chain. As with all Doyle products, the hopper seams are continuously welded inside and out. Doyle's unique bin design is easily removable from the frame; just 4 bolts and special box washers hold the hoppers to the frames. The frame assembly is made of heavy duty mild steel; it was designed to be rugged and twist resistant. Doyle's frame consists of a mild steel tubing base, with heavy duty mild steel corner braces. Doyle's corner braces are laser cut, and jig built, that means that every hopper fits on every frame. All frame surfaces are “boxed” to minimize the areas that corrosive materials can be trapped. This allows the operator to easily wash the unit off after use. The frame is metal shot blasted and powder coated bright blue. Each frame uses Henschen axle, multi trac turf tires, adjustable height hitch, and a heavy duty tongue jack. The standard drive system consists of manual engagement assembly, power frame assembly, main gearbox assembly, spinner gearboxes, and spinner dishes. The manual engagement assembly is used to engage and disengage the drive system. The assembly is made of heavy duty mild steel, has CNC machined parts, is metal shot blasted, and powder coated bright blue. An optional hydraulic engagement system is available. The power frame assembly uses a combination of CNC machined parts and laser cut parts, and is jig built. The power frame assembly transfers power from the units tires to the gearbox assembly. The assembly has a uniquely designed power wheel. When engaged, this wheel grips the tire, and produces a slip-free connection, in most cases. If surface moisture or mud is a problem, an optional mud tire and power wheel combination is available for 5 ton unit only. The main gearbox assembly consists of specialized gears and sprockets enclosed in a heavy duty gear case. The gear case is made of 304 stainless steel. Each gearbox has laser cut parts and is jig assembled, making for a virtually leak proof case. The gearbox is powered by the power frame assembly. Its job is to provide the power to the conveyor chain and the spinner gear boxes. A sight glass is installed in each gearbox; this allows the operator to quickly assess the oil level inside the gearbox. The spinner gearboxes are custom made for Doyle; they have been engineered to be long lasting and reliable, in all operating conditions. The spinner gearboxes are painted bright blue. The twin 19-1/4″ spinner dishes are made of heavy duty mild steel. Each spinner dish has three laser cut blade location holes. Four 304 stainless steel blades are bolted into these holes. The blades shape is specifically designed to throw material consistently and evenly. Each blade can be fine tuned by moving it to any one of the three operating locations. The blade locations have been calibrated by Doyle to provide the most consistent spread rates, with the broadest range of materials.

Standard Features: 14 ga. 304 stainless steel hopper construction 2″ x 6″ mild steel tubing frame, with heavy duty mild steel corner braces and 4″ x 6″ tubing tongue Bolt on hopper to frame, allows easy hopper removal from frame Heavy duty adjustable hitch Heavy duty 12,000 lb. tongue jack Single spindle design, with 8-bolt hubs 11.25 – 24SL implement rib tires 1″ x 1″ mesh type heavy duty 8″ conveyor chain All metal double press wheel with manual / hydraulic engagement, includes cylinder and hoses Twin dished type spinners, 19-1/4″ diameter with 4 adjustable stainless steel blades Tire hubs are reversible, providing 30″ or 38″ row spacing Inspection window in hopper front (standard on mid-clearance units only) Main gearbox and spinner mount assemblies are 304 stainless steel Factory assembled & tested Our 5 and 6 Ton Ground Wheel Drive Spreaders have the best features, and are the most durable spreaders on the market today. The modular design allows Doyle to customize the units to your needs, this means that your spreader is no longer a disposable unit. If in the years to come a part fails or wears out, it can be quickly repaired or replaced. This includes the hopper, frame, axles, and all drive assemblies. Our hoppers are constructed of either 14 ga. 409 stainless steel or 14 ga. 304 stainless steel. Each hopper is laser cut and jig built to precise measurements; this allows every hopper to fit every frame accurately. A chemical baffle is added inside the hopper; this keeps the material from “bridging” and reduces the amount of weight on the conveyor chain. As with all Doyle products, the hopper seams are continuously welded inside and out. The 409 hoppers are metal shot blasted and powder coated white. Doyle's unique bin design is easily removable from the frame; just 4 bolts and special box washers hold the hoppers to the frames. The frame assembly is made of heavy duty mild steel; it was designed to be rugged and twist resistant. Doyle's frame consists of a mild steel tubing base, with heavy duty mild steel corner braces. Doyle's corner braces are laser cut, and jig built, that means that every hopper fits on every frame. All frame surfaces are “boxed” to minimize the areas that corrosive materials can be trapped. This allows the operator to easily wash the unit off after use. The frame is metal shot blasted and powder coated bright blue. Each frame uses tandem Henschen axles, ribbed highway implement tires, adjustable height hitch, and a heavy duty tongue jack. The standard drive system consists of manual engagement assembly, power frame assembly, main gearbox assembly, spinner gearboxes, and spinner dishes. The manual engagement assembly is used to engage and disengage the drive system. The assembly is made of heavy duty mild steel, has CNC machined parts, is metal shot blasted, and powder coated bright blue. An optional hydraulic engagement system is available. The power frame assembly uses a combination of CNC machined parts and laser cut parts, and is jig built. The power frame assembly transfers power from the units tires to the gearbox assembly. The assembly has a uniquely designed power wheel. When engaged, this wheel grips the tire, and produces a slip-free connection, in most cases. If surface moisture or mud is a problem, an optional mud tire and power wheel combination is available for 5 ton unit only. The main gearbox assembly consists of specialized gears and sprockets enclosed in a heavy duty gear case. The gear case is made of 304 stainless steel, when the 304 stainless steel hopper is used. It is constructed of mild steel, when the 409 stainless steel hopper is used. The mild steel gear case is metal shot blasted, and powder coated bright blue. Each gearbox has laser cut parts and is jig assembled, making for a virtually leak proof case. The gearbox is powered by the power frame assembly. Its job is to provide the power to the conveyor chain and the spinner gear boxes. A sight glass is installed in each gearbox; this allows the operator to quickly assess the oil level inside the gearbox. The spinner gearboxes are custom made for Doyle; they have been engineered to be long lasting and reliable, in all operating conditions. The spinner gearboxes are painted bright blue. The twin 19-1/4″ spinner dishes are made of heavy duty mild steel. Each spinner dish has three laser cut blade location holes. Four 304 stainless steel blades are bolted into these holes. The blades shape is specifically designed to throw material consistently and evenly. Each blade can be fine tuned by moving it to any one of the three operating locations. The blade locations have been calibrated by Doyle to provide the most consistent spread rates, with the broadest range of materials.

Standard Features: 12 ga. 304 stainless steel hopper construction 2″ x 6″ mild steel tubing frame, with heavy duty mild steel corner braces Bolt on hopper to frame, allows easy hopper removal from frame Heavy duty adjustable hitch Heavy duty 12,000 lb. tongue jack Tandem 8,000 lb. axles, with 8-bolt hubs 14 L x 16.1 Hi-speed implement rib tires 1″ x 1″ mesh type heavy duty 8″ conveyor chain 1″ x 1″ mesh type heavy duty #304 stainless steel conveyor chain, 8″ wide Hydraulically driven twin “dished” spinners, 19-1/4″ diameter with 4 blades per spinner, specially designed for extremely accurate broadcasting of spreader Conveyor driven by press wheel, engaged and disengaged with hydraulic cylinder connected to tractor Inspection window in hopper front Factory assembled & tested Optional Features: PTO Drive System, w/ 29.5 gallon hydraulic tank with temperature gauge, site glass, and large hydraulic filters, metal shot blasted and powder coated bright blue Fitted nylon tarp with grommets Roll Tarp Surge brake system, 1 axle

Standard Features: 14 ga. 409 stainless steel hopper construction, all metal shot blasted and powder coated OR 14 ga. 304 stainless steel hopper construction 2″ x 6″ mild steel tubing frame, with heavy duty mild steel corner braces Bolt on hopper to frame, allows easy hopper removal from frame Heavy duty adjustable hitch Heavy duty 12,000 lb. tongue jack Tandem 8,000 lb. axles, with 8-bolt hubs 14 L x 16.1 Hi-speed implement rib tires 1″ x 1″ mesh type heavy duty 8″ conveyor chain All metal press wheel with hydraulic engagement 31.5 gallon hydraulic tank with temperature gauge, site glass, and large hydraulic filters, metal shot blasted and powder coated bright blue Hydraulic PTO pump, lines, hoses, and fittings Twin dished type spinners, 20-5/16″ diameter with 4 adjustable stainless steel blades

Standard Features: #304 stainless steel hopper construction Bolt together design, hopper to chassis Tandem 10,000 lb. axle suspension, with 8-bolt hubs 19 L x 16.1 tires on W16CH x 16.1 wheels Utilizes two sets of sprockets for conveyor rates 1” x 1” mesh type heavy duty #304 stainless steel conveyor chain, 20” wide Conveyor driven by press wheel, engaged and disengaged with hydraulic cylinder connected to tractor Metering gate sprockets, metering gate, gate slides, and gate shaft manufactured in #304 stainless steel Hydraulically driven twin “dished” spinners, 24” diameter with 4 blades per spinner, specially designed for extremely accurate broadcasting of spreader Factory assembled & tested Optional Features: PTO Drive System, w/ 29.5 gallon hydraulic tank Surge brake system, 1 axle Surge brake system, 2 axles Fitted nylon tarp with grommets Roll Tarp Inspection window in hopper front

SYSTEMS UP TO 1200 TPH From a barge or ship, InterSystems enclosed belt conveyors supported by GSI’s QuickBolt Towers and Catwalks are the proven and dependable solution, easily and safely moving product at speeds of up to 1200 TPH. Ease of maintenance via wrap-around or switchback stairs Standard OSHA-compliant guarding and clearances Speed and ease of operation afford the flexibility to condition product and then direct transfer to rail or truck, or to temporary on-site storage Load out bulk weigh options for quick and accurate loading In-house engineering team for custom solutions If your farm is near a river port, you have the luxury of using the river to unload fertilizer directly into your storage facilities using GSI's custom-built river port fertilizer systems. These systems are designed to be used with either barges or boats, and can quickly and efficiently unload large quantities of fertilizer. In addition to being faster than traditional methods, using a river port to unload fertilizer has the added benefit of being more gentle on the fertilizer itself. This means that your fertilizer will last longer and be more effective when you finally apply it to your fields. If you are interested in using a river port fertilizer system, please contact Davis Equipment today. We would be happy to discuss your specific needs and develop a solution that is perfect for your farm.

Supporting your customers with an economical solution begins with keeping the product close at hand. Systems can be utilized to fill smooth wall tanks or bulk storage warehouses.  InterSystems Receiving Features: En-masse drag conveyors with electric gates Open belt conveyors with moveable trippers GSI’s QuickBolt catwalks for access and conveyor support when storage such as fabric-covered buildings requires long spans Overhead storage ranging from 60 to 300 tons in multiple product compartments 304 Stainless steel equipment construction Galvanized steel structures and platforms InterSystems Unload Systems: Product conditioning to tower storage with weighing and blending capabilities or floor-based blending Blending towers offer an additional straight-through spout to the weigh hopper(s), vertical and horizontal mixers, or a blender bypass to either traffic through lane for blended or straight product Options: Re-elevate Load cells on blenders Oversized gates Impregnation A truck house dry fertilizer offloading system can be a great solution for your unloading needs. With a system like this, you can quickly and easily unload your fertilizer from your truck and onto your property. This can be a great solution for farmers who need to get the job done quickly and efficiently. There are a few things to consider when choosing a truck house dry fertilizer offloading system for your needs. One thing to consider is the size of the system. You need to make sure that the system you choose is large enough to handle the amount of fertilizer you'll be unloading. Davis Equipment offers systems up to 400 tons per hour to meet the needs of even the largest farmers. Another thing to consider is the type of truck you'll be using. Some systems are designed for specific types of trucks. Make sure you choose a system that's compatible with the type of truck you have. Finally, consider the price. Davis Equipment offers competitive pricing on all of our products. Make sure you compare prices before you make your final decision. If you're looking for a truck house dry fertilizer offloading system, Davis Equipment is a great place to start your search. We offer high-quality products at competitive prices. Contact us today to learn more about our systems and find the perfect solution for your needs.

InterSystems’ engineering solutions are tailored to the specific needs of high speed facilities which typically process 800 to 1,200 tons per hour through truck receiving and railroad access. InterSystems Receiving Features: OSHA-compliant enclosed belt conveyors are easy to maintain GSI QuickBolt support towers, platforms and catwalks are erected quickly; choose switch back or wrap-around stairs Fully-automated moveable tripper with a 4:1 turndown motor for quick transitions Standard electrically-driven rack and pinion gates fill micro-bins easily and eliminate manual operation We don‘t stop with state-of-the-art receiving systems. InterSystems’ blending and loadout systems incorporate the speed, accuracy, flexibility, blend quality and cost savings you expect. InterSystems Blending Tower Advantages: Offer multiple NTEP-approved weigh hoppers Allow for extra speed Increase weighing accuracy Eliminate the need to install two towers

STANDARD BLEND TOWER HORIZONTAL MIXING BLEND TOWER HYBRID TOWER ? Storage of up to 300 tons ? Up to 18-ton capacity weigh hopper ? Up to 18-ton vertical tapered auger blenders ? Largest two-stage gates in the industry ? Re-elevate ? Blender bypass ? 2nd lane wholesale spout ? Impregnation ? Galvanized support structure ? 300 tons of storage ? Two 8-ton weigh hoppers ? 8-ton paddle and ribbon high speed, high quality, high efficiency blender ? 16-ton surge hopper ? Blender bypass ? Re-elevate ? 2nd lane wholesale ? Impregnation ? Galvanized support structure ? 300 tons of storage ? Three weigh hopper design: ? Two 16 or 18-ton and ? One 5-ton for micros ? Retail and Wholesale built into one tower ? Blend and Wholesale simultaneously to two lanes without sacrificing speed ? Re-elevate ? Blender bypass ? Impregnation ? Galvanized support structure