Simonsen, Turfco - Yanmar

With input from tractor owners, Yanmar has raised the bar even higher, with performance upgrades to some of their most tried-and-true SA Series tractor models. With a new Yanmar SA Series tractor, customers can get more done – more comfortably and more conveniently – than ever before. Features Differential lock 12V outlet standard 4WD selector Smooth, hydraulic power steering Electro hydro independent PTO with one-touch on/off Front-end loader capacity + quick hitch True position control Gross Power: EPA Regulation HP (kW) 23.9 (17.8) Overall Length (with 3-Point Hitch) 105.8 (2,688) Overall Width (with R4 Tires) 54.6 (1,387) Overall Height (with Roll-Over Protection, and R4 tires) 85.8 (2,180) Transmission Hydrostatic Transmission, Dual Range Speeds Drive Type Selected 4WD Lift Capacity (Pivot Pin) lb. (kg) 1,200 (545)

Available in 304 and 409 stainless steel, the BFT9527STRTA 27 ton tender is the largest of the Simonsen BFTSTRTA tenders.  If you need to keep your applicators running a long way from home, this tender is your best friend.  Five standard compartments, heavy duty hydraulics, steep side slopes, and large trap openings combine with the user friendly design of the top delivery auger to keep you applicator full and moving.  Unloading rates of up to #3500 per minute and easy positioning of the 10x13x10 auger system will make this a favorite of your pickiest driver.  Shown with the optional self-contained diesel engine drive and fold-up driver side viewing platform catwalk. Overview 950 Cubic foot capacity with standard side height (28 ton). 5 standard compartments 7 gauge stainless steel top reinforcing for added strength and rigidity. 6" higher sides available. 14"X18" stainless steel slide gates. Stainless steel hopper, auger tubes, and flighting. 10"X13"X10" stainless steel auger system. Heavy duty hydraulic motors are isolated from the fertilizer to minimize maintenance and prolong their useful life. Large pit dump/cleanout on the vertical auger. Manual or electric tarps available. Wet kit or self-contained diesel engine drive available. New Neville tandem or tri-axle drop deck tender trailers available from 36 to 44 feet in length. Dry chemical bin option available. Full length fold down catwalks available.

Available in 304 and 409 stainless steel, the Simonsen BFT8024STRTA top auger trailer mounted tender is the workhorse of the Simonsen lineup.  The 10x13x10 delivery auger system, large trap openings, and steep slopes combine to offer unloading speeds of up to #3500 per minute.  The rotating delivery auger allows for filling of multiple compartments without the need for repositioning.  The 20 foot long delivery auger will make filling any applicator easy.  Discharge heights of over 20 feet high and a long reach allow applicators to park away from the tender keeping your equipment and personnel safe from harm.  The optional two compartment chemical bin shown is available on either truck or trailer applications and runs a completely separate auger system to keep your dry chemical or micro-nutrient "pure" until they reach the applicator. Overview 800 Cubic foot capacity (24 ton) 3 standard eight ton compartments with splits available (up to 6 total compartments). 7 gauge stainless steel top reinforcing for added strength and rigidity. 6" higher sides available. 14"X18" stainless steel slide gates. Stainless steel hopper, auger tubes, and flighting. 10"X 13"X 10" stainless steel auger system. Heavy duty hydraulic motors are isolated from the fertilizer to minimize maintenance and prolong their useful life. Large pit dump/cleanout on the vertical auger. Removable cleanout cover between the vertical and delivery auger. Manual or electric tarps available. Wet kit or self contained diesel engine drive available. New Neville tandem or tri-axle drop deck tender trailers available from 36 to 44 feet in length. Dry chemical bin option available. Full length fold down catwalks available.

Available in 304 and 409 stainless steel, the Simonsen BFT8424STRTA top auger trailer mounted tender is the workhorse of the Simonsen lineup.  The 10x13x10 delivery auger system, large trap openings, and steep slopes combine to offer unloading speeds of up to #3500 per minute.  The rotating delivery auger allows for filling of multiple compartments without the need for repositioning.  The 20 foot long delivery auger will make filling any applicator easy.  Discharge heights of over 20 feet high and a long reach allow applicators to park away from the tender keeping your equipment and personnel safe from harm.  The self-contained engine power pack shown is a popular option available on all BFT series side and top auger trailer mount tenders.  We sell new Neville trailers built to your desired length though 36' and 44' lengths are most common. Overview 840 cubic foot capacity with standard side height (24 ton). 6" higher sides available. 4 standard six ton compartments with splits available (up to 8 total compartments). 14" X 18" stainless steel slide gates. Stainless steel hopper, auger tubes, and flighting. 10"X13"X10" stainless steel auger system. Heavy duty hydraulic motors are isolated from fertilizer to minimize maintenance and prolong their useful life. Large pit dump/cleanout on the vertical auger. Removable cleanout cover between the vertical and delivery auger. Manual or electric tarps available. Wet kit or self-contained diesel engine drive available. New Neville tandem or tri-axle drop deck tender trailers available from 36 to 44 feet in length. Dry chemical bin option available. Full length fold down catwalks available.

Available in 304 and 409 stainless steel and sized to fit on a tandem truck chassis, this 16 ton truck mounted top delivery auger tender is a popular alternative to side and rear auger tenders in a compact unit.  The 10X13X10 auger system, large trap openings, and steep slopes combine to offer unloading speeds of up to #3500 per minute.  The rotating delivery auger allows for filling of multiple compartments without the need for repositioning.  The 20 foot long delivery auger will make filling any applicator easy.  Discharge heights of over 20 feet high and a long reach allow applicators to park away from the tender keeping your equipment and personnel safe from harm. Overview 530 Cubic foot capaicty (16 ton). 2 standard compartments with splits available. 10"X13"X10" stainless steel auger system. Unloading rate of up to #3500 per minute Heavy duty tandem hydraulic pump. Heavy duty hydraulics with liquid filled gauges located on the rear passenger corner for easy operation. Heavy duty hydraulic motors are isolated from the fertilizer to minimize maintenance and prolong their useful life. Hydraulic raise/lower on the delivery auger. Hydraulic power turn on the vertical. Large pit dump/cleanout on the vertical auger. Removable cleanout cover between vertical and delivery auger. Stainless Steel hopper, slide gate assemblies, auger tubing, and auger flighting. 6" higher side option available. Full length fold down catwalks available. Large hydraulic reservoir. Full length fenders. Manual or electric tarps available. Dry chemical bin option available.

Available in 304 and 409 stainless steel, the BFT6318STA 18 ton truck mounted top delivery auger tender is our mid sized tender designed to give you more capacity when a 16 ton tender just isn't big enough.  Compact enough to still fit well on a tandem axle chassis, most customers choose to add a third axle to take full advantage of the additional capacity.  This particular unit is shown with the optional separate dry chemical tender.  The BFT6318STA utilizes a 10X13X10 auger system, large trap openings, and steep slopes to offer an unloading rate of up to #3500 per minute.  The rotating delivery auger allows for filling of multiple compartments without the need for repositioning.  The 20 foot long delivery auger will make filling any applicator easy.  Discharge heights of over 20 feet high and a long reach allow applicators to park away from the tender keeping your equipment and personnel safe from harm. Overview 630 Cubic foot capacity with standard side height (18 ton). 6" higher sides available. 3 standard equal compartments with splits available - up to 6 compartments total. 10"X13"X10" stainless steel auger system. Unloading rate of up to #3500 per minute. Heavy duty tandem hydraulic pump. Heavy duty hydraulics with liquid filled gauges located on the rear passenger corner for easy operation. Heavy duty hydraulic motors are isolated from the fertilizer to minimize maintenance and prolong their useful life. Hydraulic raise/lower on the delivery auger. Hydraulic turn on the vertical auger. Large pit dump/cleanout on the vertical auger. Removable cleanout cover between vertical and delivery auger. Stainless steel hopper, slide gate assemblies, auger tubing, and auger flighting. Full length catwalks available. Large hydraulic reservoir. Full length fenders. Manual or electric tarps available. Separate dry chemical bin option available.

Available in 304 and 409 stainless steel, the BFT8024STA is a truck mounted top delivery auger tender that has three 8 ton compartments instead of four 6 ton compartments.  The 10X13X10 delivery auger system, large trap openings, and steep slopes combine to offer unloading speeds of up to #3500 per minute.  The rotating delivery auger allows for filling of multiple compartments without the need for repositioning.  The 20 foot delivery auger will make filling any applicator easy.  Discharge heights of over 20 feet high and a long reach allow applicators to park away from the tender keeping your equipment and personnel safe from harm. Overview 800 cubic foot capacity (24 ton). 3 standard eight ton compartments with splits available (6 compartments total). 6" higher sides available. 14"X18" stainless steel slide gates. Stainless steel hopper, auger tubes, and flighting. 10"X13"X10" auger system. 19 foot long discharge auger. Discharge rate of up to #3500 per minute. Large pit dump/cleanout on the vertical auger. Hydraulic raise/lower/turn on delivery auger. Hydraulic controls located at the rear drivers corner. Heavy duty hydraulic system with tandem hydraulic pump. 40 degree side slopes for thorough cleanout. Full length fold down catwalks available. Large hydraulic reservoir to keep your oil cool. Full length fenders. Manual or electric roll tarps available. Separate dry chemical tender available.

Available in 304 and 409 stainless steel, this 24 ton truck mounted top delivery auger fertilizer tender is designed to give you the capacity you need when pulling a trailer just isn't right for your operation.  Keeping your tender truck mounted makes access onto country roads and narrow field entrances much easier when compared to a trailer.  The 10X13X10 delivery auger system, large trap openings, and steep slopes combine to offer unloading speeds of up to #3500 per minute. The rotating delivery auger allows for filling of multiple compartments without the need for repositioning.  The 20 foot long delivery auger will make filling any applicator easy.  Discharge heights of over 20 feet high and a long reach allow applicators to park away from the tender keeping your equipment and personnel safe from harm.  Blue color is standard but other colors are available upon request. Overview 840 Cubic foot capacity (24 ton) 4 standard six foot compartments with splits available (up to 8 total compartments) 6" higher side option available. 14"X18" stainless steel slide gates. Stainless steel hopper, auger tubes, and flighting. 10"X13"X10" stainless steel auger system. Unloading rate of up to #3500 per minute Heavy duty tandem pump. Heavy duty hydraulics with liquid filled gauges located on the rear passenger corner for easy operation. Heavy duty hydraulic motors are isolated from the fertilizer to minimize maintenance and prolong their useful life. Hydraulic raise/lower on the delivery auger. Hydraulic power turn on the vertical auger. Large pit dump/cleanout on the vertical auger. Removable cleanout cover between vertical and delivery augers. Stainless Steel hopper, slide gate assemblies, auger tubing, and auger flighting. Full length fold down catwalks available. Large hydraulic reservoir. Full length fenders. Manual or electric roll tarps available. Dry chemical bin option available.

The Turfco WideSpin™ 1550 was designed to help you achieve your agronomic goals, increase staff productivity and free up your time. With Turfco's patented hydraulic system and spinner design, along with our Smart Controller, you can be confident you're getting the application you want every time. Reduce up to 720 passes per year and minimize turf traffic to achieve the most playable, beautiful golf course. OVERVIEW The Turfco Edge started with listening to what frustrates superintendents when it comes to topdressing. We heard they were tired of doing wheel-to-wheel spreads, overlapping spreads, dealing with complicated mechanical adjustments, and wasting time checking in with their crews to verify spread settings. The WideSpin™ 1550 solves these problems, and more. Calculating and knowing your rates is easier. Adjusting settings is easier. Saving preferred settings is easier. Loading is easier. Topdressing greens, approaches and tees at the same time is easier. And getting the exact spread you want, every time, is easier. Our unique design makes it easy to get whatever width and rate you want, without having to do mechanical adjustments. You can save your preferred applications into four programmable presets, changing widths and rates on the fly, increasing productivity, eliminating guesswork and freeing up your time. WideSpin 1550 topdressers are available in truck-mounted and tow-behind models with engine or hydraulic power options. You can choose between Standard Electronic Control or upgrade to our patented digital Smart Controller. Standard Electronic Control models are easy to use and offer good value for the money. Smart Controller models offer rate calculation and programmable presets for greatest productivity and labor savings. KEY FEATURES Get the exact spread you want as you move from greens to approaches to tees, at the push of a button. Know your application rates, and determine how much material you need to budget — all for the first time ever with our on-board calculator. Reduce the number of passes and decrease traffic on your greens with WideSpin edge-to-edge applications. Drive topdressing down into the turf canopy by adjusting the spinner angle, minimizing the need for brushing and eliminating variations in spread due to moisture content (spreads the same wet or dry). Refill the hopper faster and with less spillage – galvanized hopper has 20% greater capacity and wide opening fits an 80" bucket. Three year warranty BEST SPREAD IN THE INDUSTRY For the first time ever, you can set up and save your applications one time — then get your perfect spread every time. With Turfco’s patented technologies, you can reduce greens passes, minimize turf traffic, and get a more consistent spread. REDUCED PASSES Save time and reduce wear on your greens with Turfco's patented WideSpin™ edge-to-edge technology. Decrease the number of passes on your greens by up to 720 times per year* as compared to the wheel-to-wheel method. Improve productivity and save time; unique 30-foot wide, even spread makes it possible to cover an average-size green in just two passes. Dramatically reduce traffic on your greens, reducing the potential for soil compaction and hydraulic leaks. *18 greens, 10 times a year. CALCULATE AND LOCK-IN PREFERRED APPLICATIONS Know your application rates, calculate the rates you want, and determine how much material you need to budget with our on-board calculator. Smart Controller lets you save your preferred applications into four programmable presets, allowing you to switch between widths and rates as you move from greens to approaches to tees at the push of a button. ADJUSTABLE SPINNER Drive topdressing down into the turf canopy by adjusting the spinner angle, minimizing the need for brushing and eliminating variations in moisture content (spreads the same wet or dry). LARGE HOPPER Large, galvanized steel hopper has increased capacity and is wider, making it easier to fill and less often! Refill the hopper faster and with less spillage — has 20% greater capacity and wider opening fits an 80” bucket. SPECIFICATIONS                                Model Tow-Behind 1550 Models: Engine-powered w/Smart Control (#85828); Engine-powered w/ Standard Electronic Control (#85829); Hydraulic-powered w/Smart Control (#85824); Hydraulic-powered w/Standard Electronic Control (#85825) Warranty 3 Years Engine / Models 13 HP Briggs and Stratton (engine-powered models only) Operator Control SMART: 3-position switch; 4 programmable presets; onboard rate calculator; instantaneous belt and spinner speed control; instant throttle down control (engine powered)      STANDARD Electronic: Standard 3-position switch with manual control for spinner and belt speed Weight Tow-Behind Models: Engine-powered: 1,324 lbs (601 kg);  Hydraulic-powered: 1,021 lbs (463 kg) Truck-Mounted Models: 710 lbs w/o mounting (322 Kg) Hopper Capacity 21 ft3 (0.59 m3) struck level; 25 ft3 (0.71 m3) heaped Hopper Size 80" x 36.5" (2.03 x 0.92 m) at the top Spreading Width 12' up to 40' (2.7 up to 12 m) Spread Application 0.45 ft3 per 1,000 ft3 up to 12 ft3 per 1,000 ft3 Ground Speed Up to 8 MPH (12.8 km/h) Conveyor Belt 18" (0.46 m) wide pebble surface composition with heavy-duty polyester cord Metering Gate Manually operated with Light Spread/Heavy Spread Calibrations Drive Engine Powered: Engine powered Hydraulics / Hydraulic Powered: Tow vehicle powered hydraulics Wheels 4 Ply 26.5 x 14.00 x 12 Turf (tow-behind model)