Traqnology, Redexim - Progressive Turf Equipment

The floating twin spike rollers of the Multi-Seeder follow the contours, saturating the surface with small holes. The seed is then accurately distributed onto the surface before an adjustable brush sweeps the seeds into the holes. The rear roller then passed over to cover the seed for germination. Infinitely adjustable seed rates Front rollers can be set to fixed or float depending on surface types Hectare meter details area covered Operation Tractor pulled Working width (m) 1.6 Working width (inch) 63 Max. Working depth (mm) 5 - 20 Max. Working depth (inch) 0.2 - 0.8 Max. Working speed (km h) 12 Max. Working speed (mph) 7.5 Weight (kg) 750 Weight (lbs) 1653 Hopper capacity (L) 200 Hopper capacity (cu.ft.) 7.1 Min. Tractor HP required 35 Min. Lifting capacity 610 mm behind the lifting eyes (kg) 1280 Min. Lifting capacity 24 inch behind the lifting eyes (lbs) 2822 Min. Pressure (bar) 1 - 2 Min. Pressure (psi) 14.5 - 29 Three-point hitch 3-point CAT 1-2 Lubricant EP2

The punch-action Verti-Core III quickly cores turf surfaces while hold-down plates ensures no damage is caused to the surface in the process; Its belt drive systems ensure a high work-rate & neat hole pattern. The working depth can be easily adjusted as required by ground conditions and operators. High-Speed Optional side or top-eject tines Working width (m) 1.6 Working width (inch) 63 Max. Working depth (mm) 100 Max. Working depth (inch) 4 Weight (kg) 846 Weight (lbs) 1865 Hole spacing distance driving direction (mm) 25 - 110 Hole spacing distance driving direction (inch) 1 - 4.3 Min. Tractor HP required 45 Min. Lifting capacity 610 mm behind the lifting eyes (kg) 1000 Min. Lifting capacity 24 inch behind the lifting eyes (lbs) 2205 Three-point hitch 3-Point CAT 1 Rpm Max. 540 Gearbox oil SAE 90 Lubricant EP 2

The lightweight Verti-Drain® 1513 can work to a depth of 6” / 150mm and is well suited to sensitive turf surfaces. The belt driven machine operates a high speed while giving a neat and consistent hole pattern. An optional rear roller can be added to smooth the surface and leave a neat finish. High-speed machine Lightweight machine with low HP requirements Integrated parking stands for ease of operation Specifications SKU 111.215.013 Working width (m) 1.32 Working width (inch) 52 Max. Working depth (mm) 150 Max. Working depth (inch) 6 Working speed at hole spacing 65 mm (km h) 2.12 Working speed at hole spacing 2 1 2 inch (mph) 1.3 Weight (kg) 448 Weight (lbs) 985 Hole distance with 12 mm tines (mm) 55 Hole distance with 1 2 x 6 inch tines (inch) 2.17 Hole spacing distance driving direction (mm) 25 - 125 Hole spacing distance driving direction (inch) 1-7.5 Max. Diameter solid tine (mm) 12 x 150 Max. Diameter solid tine (inch) 1/2 x 6 Max. Diameter hollow tine (mm) 19 x 150 Max. Diameter hollow tine (inch) 3/4 x 6 Min. Tractor HP required 25 Min. Lifting capacity 610 mm behind the lifting eyes (kg) 500 Min. Lifting capacity 24 inch behind the lifting eyes (lbs) 1102 Max. capacity with spacing 65 mm (m² hr) 2822 Max. capacity with spacing 2 1 2 inch (ft² hr) 30374 Three-point hitch 3-point CAT 1 Rpm Max. 540 Gearbox oil 80W90 - 0.9L Lubricant EP 2 Dimensions (width mm) 970 Dimensions (height mm) 780 Dimensions (length mm) 1610 Dimensions (width inch) 38.2 Dimensions (height inch) 30.7 Dimensions (length inch) 63.4 Standard Components Description Quantity Toolbox with combi tool and manual 1 PTO Shaft 1 Storage Legs 1 Solid Tine 12x150mm (1/2x6") 24

Save paint and time! Sportstraq is the only GPS guided line marking product on the market that combines sub-inch, repeatable precision, iPad user interface, and professional high-pressure, airless paint system. Initial field layouts only have to be completed once and take less than 5 minutes. Users can create as many field designs as they choose with all data backed up on our cloud. Sportstraq users can line fields all day using high paint capacity skids. Line marking professional size soccer fields can be accomplished in under 15 minutes with total paint consumption under 1.5 US gallons.  Traqnology’s auto steer system drive the UTV with sub-inch accuracy while controlling the paint gun automatically. Simply use the Sportstraq app on the iPad to layout your desired measurements for the selected sport, position the field, and save it for future use. It’s that simple!  Traqnology is not just providing a line marking system; we are offering a game-changing solution that redefines the industry. With our GPS auto steer system, you will experience unparalleled speed, accuracy, and convince. From soccer and football fields to lacrosse or parking lots, our technology is adaptable. Traqnology offers two configurations of our high-pressure, airless painting system.  Option one features a 25 gallon tank with a 5 gallon bucket for clean-out.  Option two features a system to pull from four 5 gallon buckets of paint.  Both configurations use a 5.5 HP gas engine, airless pump, titan paint gun, and 25 feet of hose for hand painting. View Traqnology's Youtube Page

Overview The Pro-Flex 120 is the most widely used pull-behind contour finishing mower. It has become the 'go-to' contour and rough mower due to its reliability, a 10' wide cut, and its versatility. With 5 independent floating decks, the Pro-Flex 120 will easily follow contour changes that are found on golf courses and campuses, producing a uniform quality cut that is demanded by Superintendents and members alike. The Pro-Flex 120 has several standard features that are important on a pull-behind contour mower, but are only available from Progressive! Utilizing the tractor for other tasks is a key advantage so we made connecting a Pro-Flex 120 to the tractor easy, thanks to an adjustable clevis, a low tongue weight, and an auto-lock PTO shaft. Originally introduced in 1999, the Pro-Flex 120 is well known as a durable, reliable rotary finishing mower that is now easier to maintain than ever before. The Pro-Flex 120 is “The Better Built Choice”. Benefits Contour Mowing Ultimate contour following due to five independent decks, allowing for a world-class cut and excellent clipping dispersal.   Ideal for Making a Stepped or a Transition First-Cut Being able to quickly and easily set each individual deck height gives the opportunity to do two jobs in one pass!   Pro Lift-N-Turn™ An industry exclusive feature – not found on other contour mowers! Pro Lift-N turn™ allows the decks to be raised slightly off the ground with the PTO still engaged. Crossing a cart path or other minor obstacles has never been easier.   Smart by Design Innovative designs only found on Progressive mowers, help their customers do more in less time and at less cost!   Easy Routine Maintenance Progressive's goal is to keep their customers mowing and not spend time performing routine maintenance. Reducing the number of grease points and using extended service interval PTO shafts are but two of the ways we minimize maintenance time and cost. Part Number: 601205 (Red) or 602711 (Green) (North America) / 601205D (Red) or 602711 (Green) (Worldwide) Recommended PTO H.P.: 30 to 40 Mowing Capacity (*Assumes no overlap or turning): 4 mph 4.4 acres per hour * 6 mph 6.5 acres per hour * Cut Height Range: 1" - 3 1/4" Cutting Width: 10' Turning Radius: 16" uncut circle Transport Width: 8' 6" Transport Tires: 18.5 X 8.5 - 8 4ply Transport Height: 4' 2" Weight: 2075 lbs Transport Length: 11' Std. Equipment: 5 Independent floating 28”diameter decks to follow all contours. Quick adjust swivel hitch, allows mower to follow contours without interference from tractor. Heavy-duty construction, open rear-discharge with adjustable deflectors. Rubber damped, automatic belt tensioners on all belts. Pro Lift-N-Turn™ allows the operator to temporarily raise the decks slightly off the ground without stopping and with the PTO still engaged. Ideal for crossing cart paths or when engaging the PTO. Puncture proof tires, 10”dia x 4”wide (4 per deck) mounted on greaseable tapered roller bearings. Deck shock absorbers, able to cut at high speeds yet maintain consistent quality cut. Able to cut while backing up, this allows cutting in corners and other hard to reach areas. CV input shaft system for easy connection to any tractor. Maintenance free blade spindle assemblies for reduced maintenance. High lift blades for superior cut. Blade tip Speed 18,600 FPM. Anti-Scalp Rollers on front and back of each deck. Anti-Scalp Skids on both sides of each deck Opt. Equipment: 606501 Mulch Kit complete with mulching blades not installed 606502 Mulch shut off plate kit (No mulch blades included) not installed 600526 Mulch Blade Kit (Four black left hand and one red right hand blades) 600517 High Lift Blade Kit (Four black left hand and one red right hand blades) 600524 Pro-Flex Belt Kit – for the complete mowerMulch Kit complete with mulching blades not installed

Overview The Progressive TD65-2 is a tri-deck finish mower designed to maintain large areas quickly and economically. With a 12' wide cutting swath, the TD65-2 is capable of mowing over 60 acres in an 8 hour day at speeds up to 6 miles per hour. Three independent floating mower decks mounted on a transport frame follow the ground conditions found in school yards, recreation areas, and corporate campuses. The TD65-2 produces a professional after cut appearance. When you are not mowing, the mower can be quickly disconnected from the tractor, increasing the utilization of the tractor for other tasks. Similarly, reconnection is quick and simple. Now that's value! Progressive designed the TD65-2 mowing deck to assist the even dispersion of clippings through the open rear discharge area - avoiding clumping and windrows. Only minutes are required to change the TD65-2 cutting height from 1" to 5" without the use of tools. For convenience and safety, all transport and mowing functions are activated without the operator leaving the tractor's seat. Optional transport tires and fenders are available if the mower needs to be towed longer distances. Overall Hook-Up Made Easy: Knowing your tractor may be used for other tasks, we made the connection process simple.   Easy to Transport and Maintain Progressive has made your uptime our passion. Always pushing the envelope with innovative options that keeps the end user in the field longer.   A Superior Cut for a Superior Finish The selection of blade for your mower is critical. Progressive has different options of blades to suit all different needs.   Cut More in a Shorter Amount of Time With a 12ft cutting width, the TD65-2 is able to cut in 8.7 acres of grass an hour.   Ease Of Maintenace Incorporating designs that are field proven and components that are used on much larger mowers – up to 36’ wide, Specifications Part Number: 526512B (North America) 526512D (Worldwide) Recommended PTO H.P.: 25 to 40 Mowing Capacity: * (Assumes no overlap or turning) 2 mph 2.9 acres per hour * 4 mph 5.8 acres per hour * 6 mph 8.7 acres per hour * Cut Height Range: 1" to 5" Cutting Width: 12' Turning Radius: 24" uncut circle Transport Width: 7' 6" Transport Tires: 18 X 9.50 X 8 NHS, 6 ply, Turf Saver Tires Transport Height: 5' 6" Weight: 2380 lbs Transport Length: 14' Opt. Equipment: 522311 Heavy Duty Transport Tires (in lieu of standard tire factory installed) 521811 Spare - Heavy Duty Transport Tire (20.5 x 8 -4 ply) (must order 2 if replacing standard tire – requires corner pin p/n 521811) 522604 High Lift Blade Kit (replacement set of 7 fixed black blades) 522607 Low Lift Blade Kit (replacement set of 7 fixed blades) 522506 Mulching Kit – (Requires 522612 Mulch Blade Kit) not installed 522612 Mulch Blade Kit (set of 7 blades)

Overview Progressive’s 12 foot Tri-Deck Roller Mower (TDR-12) is designed to maintain wide area mowing venues that require a superlative after cut appearance. The superior quality of cut, coupled with the TDR-12’s rugged construction, ease of maintenance and use give the TDR-12 the versatility to tackle a wide variety of mowing applications in parks, sports fields, and corporate campuses. The TDR-12’s full length rollers, which allow the mower to cut as low as ½” while simultaneously rolling and striping the mowing surface. Higher mowing speeds are often possible as the bounce from pneumatic tires are eliminated, making quick work of big jobs. Cutting heights are quick and simple to set with the supplied tool to any height from ½” to 4”. The TDR-12 is another example of the ingenuity and quality that goes into producing a durable, reliable rotary finishing mower that is easy to maintain. The TDR-12 is not only a Value and Performance leader, it is “The Better Built Choice” Benefits Pro Lift-N-Turn™ An industry exclusive feature – not found on other contour mowers! Pro Lift-N turn™ allows the decks to be raised slightly off the ground with the PTO still engaged. Crossing a cart path or other minor obstacles has never been easier.   Superior Cut Quality and Striping TDR-12’s high tip speed blades provide superior cut quality while heavy duty rollers produce bold recognizable stripes.   Worry Free Maintenance Maintenance free blade spindles, and PTO Shafts requiring lengthy intervals between greasing, reduces maintenance but provides you with the same reassurance of performing daily maintenance.   PTO Connection The Constant Velocity (CV) input PTO and auto-lock PTO coupler makes connecting the mower to a tractor easier while providing extra protection to the driveline by minimizing vibration when turning. Specifications Part Number: 528712B (North America) / 528712D (Worldwide) Recommended PTO H.P.: 25 to 40 Mowing Capacity (*Assumes no overlap or turning): 2 mph 2.9 acres per hour * 4 mph 5.8 acres per hour * 6 mph 8.7 acres per hour * Cut Height Range: 1/2" to 4" Cutting Width: 12' Turning Radius: 24" uncut circle Transport Width: 7' Transport Tires: P275 / 60 R15 automotive tires Transport Height: 7' 6" Weight: 3400 lbs Transport Length: 14' Std. Equipment: Heavy-duty construction, open rear-discharge, easy cutting height adjustment. Heavy-duty 6” dia. rollers supported by 2 - 1.25” ductile flange bearings. Maintenance free blade spindle assemblies for reduced maintenance. High lift blades for superior cut. All decks turn the same direction for control of discharge Blade tip speed 18,287 FPM. Transport tires: P275/60 SR15. CV input shaft system for easy connection to any tractor Opt. Equipment: 528153 Fender kit (both sides), with provision to mount lights 522604 High Lift Blade Kit (replacement set of 7 fixed, black left-hand blades)

Overview The Progressive SDR-65 is a three point hitch version of the popular tri-deck TDR-15 mower and it utilizes many of the same components. Not to be confused with other, light duty three point hitch mowers that are available, the SDR-65 has a 6” diameter rollers on both the front and rear across the full width of the deck. Ideal for smaller mowing jobs where a quality cut is mandatory, the SDR’s rollers allow you to cut as low as ½”, while simultaneously striping and rolling the mowing surface. To minimize service requirements, the SDR-65 is equipped with field proven maintenance free blade spindles. Progressive’s SDR-65 mower is another example of the ingenuity and quality that goes in to producing a durable, reliable rotary finishing mower that is easy to maintain. It shows once again why the SDR-65 is “The Better Built Choice”. Benefits Easy Height Adjustment Infinite cutting height adjustment from ½” to 4”.   Full Width Rollers The rollers will stripe the turf, leaving a pleasing visual impact for the facilities patrons – a testament to the professionalism of the job.   High Blade Tip Speed Progressive’s high tip speed provides a clean even cut at ground speeds up to 6 miles per hour for the high productivity users have come to appreciate from a Progressive mower.   Simpler Maintenance = Lower Cost Maintenance Free Blade Spindles and sealed roller-end bearings are used to lower both the cost and time spent on routine maintenance. Specifications Part Number: 531965 (North America) 531965C (Worldwide) Recommended PTO H.P.: 25 Mowing Capacity (*Assumes no overlap or turning): 2 mph 1.25 acres per hour* 4 mph 2.5 acres per hour* 6 mph 3.75 acres per hour* Cut Height Range: 1/2" tp 4" Cutting Width: 65" Transport Width: 72" Weight: 975 lbs Std. Equipment: Heavy-duty construction, open rear discharge, easy cutting height adjustment. Heavy duty 6” dia. rollers supported by 2 - 1.25” ductile flange HEX bearings Maintenance free blade spindle assemblies for reduced maintenance. High lift blades for superior cut. Tip speed 18,287 FPM Opt. Equipment: 522361 23” Low Lift Blade (three required) 522360 23” High Lift Blade (three required)