New - Aerators

The Tri-fecta name ties to the three functions of the new model - Flexible Rolling, Deep Vertical Cutting and SoilAeration. The number of tines has doubled to provide 1” spacing and the PlanetAir Tri-fecta has been developed into atournament quality roller. So you canaerate and roll or lock the rotor and justroll with your new Tri-fecta.

Aer-8 units are available in 60″ and 78″ widths, either pull-type or 3-point hitch mounted frame styles. The pull-type kit can be outfitted with hydraulic lines directly to the tow vehicle or with an electric/hydraulic power pack. The power pack includes a remote control to the driver’s seat and a battery-charging cable to maintain charge in the battery through repeated use. An additional benefit is water conservation. Voids in the soil capture rain or irrigation for maximum moisture utilization and run-off prevention. Hillsides and fairway mounds are lush and green again. Wet spots are opened and evaporation rates increased to bring the soil moisture back into balance and the area back into full utilization.

The lightweight Verti-Drain® 1513 can work to a depth of 6” / 150mm and is well suited to sensitive turf surfaces. The belt driven machine operates a high speed while giving a neat and consistent hole pattern. An optional rear roller can be added to smooth the surface and leave a neat finish. High-speed machine Lightweight machine with low HP requirements Integrated parking stands for ease of operation Specifications SKU 111.215.013 Working width (m) 1.32 Working width (inch) 52 Max. Working depth (mm) 150 Max. Working depth (inch) 6 Working speed at hole spacing 65 mm (km h) 2.12 Working speed at hole spacing 2 1 2 inch (mph) 1.3 Weight (kg) 448 Weight (lbs) 985 Hole distance with 12 mm tines (mm) 55 Hole distance with 1 2 x 6 inch tines (inch) 2.17 Hole spacing distance driving direction (mm) 25 - 125 Hole spacing distance driving direction (inch) 1-7.5 Max. Diameter solid tine (mm) 12 x 150 Max. Diameter solid tine (inch) 1/2 x 6 Max. Diameter hollow tine (mm) 19 x 150 Max. Diameter hollow tine (inch) 3/4 x 6 Min. Tractor HP required 25 Min. Lifting capacity 610 mm behind the lifting eyes (kg) 500 Min. Lifting capacity 24 inch behind the lifting eyes (lbs) 1102 Max. capacity with spacing 65 mm (m² hr) 2822 Max. capacity with spacing 2 1 2 inch (ft² hr) 30374 Three-point hitch 3-point CAT 1 Rpm Max. 540 Gearbox oil 80W90 - 0.9L Lubricant EP 2 Dimensions (width mm) 970 Dimensions (height mm) 780 Dimensions (length mm) 1610 Dimensions (width inch) 38.2 Dimensions (height inch) 30.7 Dimensions (length inch) 63.4 Standard Components Description Quantity Toolbox with combi tool and manual 1 PTO Shaft 1 Storage Legs 1 Solid Tine 12x150mm (1/2x6") 24